Preparation and characterization of visible light responsive Fe2O3-TiO2 composites

In this study we present the effects of iron oxide (Fe₂O₃) on titanium dioxide (TiO₂) in synthesising visible-light reactive photocatalysts. A Fe₂O₃-TiO₂ composite photocatalyst was synthesized from Fe₂(SO₄)₃ and Ti(SO₄)₂ by a ethanol-assisted hydrothermal method. The preparation conditions were optimized through the investigation of the effects of hydrothermal temperature and time as well as molar ratio of Ti to Fe on the photocatalytic activity. The visual, physical and chemical properties of the Fe₂O₃-TiO₂ composites were investigated. The results showed that α-Fe₂O₃ and anatase TiO₂ were present in the composites. The Fe₂O₃-TiO₂ synthesized under optimum condition consisted of mesoporous structure with an average pore size of 4 nm and a surface area of 43 m²/g. Under visible and solar light irradiation, the photocatalytic activity of optimized sample was significantly higher than that of pure TiO₂. This sample led to a photodegradation efficiency of 90% and 40% of auramine under visible light and solar light, respectively.     

10BaF₂:NaF,Na₃AlF₆/TiO₂ composite as a novel visible-light-driven photocatalyst based on upconversion emission

A rare-earth free upconversion luminescent material, 10BaF 2 :NaF, Na 3 AlF 6 , is synthesized by a hydrothermal method. The study of fluorescent spectrum indicates that it can convert visible light (550 nm–610 nm) into ultraviolet light (290 nm–350 nm), and two emission peaks at 304 nm and 324 nm are observed under the excitation of 583 nm at room temperature. Subsequently, 10BaF 2 :NaF, Na 3 AlF 6 /TiO 2 composite photocatalyst is prepared and its catalytic activity is evaluated by the photocatalytic reduction of CO 2 under visible light irradiation (λ > 515 nm). The results show that 10BaF 2 :NaF, Na 3 AlF 6 /TiO 2 is a more effective photocatalyst for CO 2 reduction than pure TiO 2 , their corresponding methanol yields are 179 and 0 μmol/g-cat under the same conditions. Additionally, the mechanism of photocatalytic reduction of CO 2 on 10BaF 2 :NaF, Na 3 AlF 6 /TiO 2 is proposed.     

Design and fabrication of a TiO2/nano-silicon composite visible light photocatalyst

Nano-silicon (nc-Si) was utilized as the charges generator to promote the photocatalytic and super-hydrophilic reactivity of TiO₂ film under visible light irradiation. The photocatalytic ability of TiO₂/nc-Si composite photocatalyst was evaluated by a set of experiments to photodecompose 100 ppm methylene blue (MB) in aqueous solution. And the super-hydrophilic property was characterized by measuring the water droplet contacts angle, under visible light irradiation in atmospheric air and at room temperature. Under 100 mW/cm² visible light irradiation, the droplet contact angles were reduced to 0° within 4 h with nc-Si charge generator. Additionally, the rate constant of MB photo-degradation was promoted 6.6 times.     

IR and XPS investigation of visible-light photocatalysis—Nitrogen-carbon-doped TiO2 film

To use solar irradiation or interior lighting efficiently, we sought a photocatalyst with high reactivity under visible light. Nitrogen and carbon doping TiO_2−x−yN_xC_y films were obtained by heating the TiO₂ gel in an ionized N₂ gas and then were calcined at 500 °C. The TiO_2−x−yN_xC_y films have revealed an improvement over the TiO₂ films under visible light (wavelength, 500 nm) in optical absorption and photocatalytic activity such as photodegradation of methyl orange. X-ray photoemission spectroscopy, infrared spectrum and UV-visible (UV-vis) spectroscopy were used to find the difference of two kinds of films. Nitrogen and carbon doped into substitutional sites of TiO₂ has been proven to be indispensable for band-gap narrowing and photocatalytic activity.     

Enhancement of photocatalytic degradation of polyethylene plastic with CuPc modified TiO2 photocatalyst under solar light irradiation

Solid-phase photocatalytic degradation of polyethylene (PE) plastic, one of the most common commercial plastic, over copper phthalocyanine (CuPc) modified TiO₂ (TiO₂/CuPc) photocatalyst was investigated in the ambient air under solar light irradiation. Higher PE weight loss rate, greater texture change; more amount of generated CO₂, which is the main product of the photocatalytic degradation of the composite PEC plastic can be achieved in the system of PE-(TiO₂/CuPc) in comparison with PE-TiO₂ system. The CuPc promoted charge separation of TiO₂ and enhanced the photocatalytic degradation of PE based on the analysis of surface photovoltage spectroscopy (SPS). During the photodegradation of PE plastic, the reactive oxygen species generated on TiO₂ or TiO₂/CuPc particle surfaces play important roles. The present study demonstrates that the combination of polymer plastic with TiO₂/CuPc composite photocatalyst in the form of thin film is a practical and useful way to photodegrade plastic contaminants under solar light irradiation.     

铈和磷钨酸共掺杂纳米二氧化钛中空纤维的制备及其光催化活性

以棉花纤维为模板,以钛酸四正丁酯、硝酸铈铵和磷钨酸为原料采用模板法制备了一系列铈和磷钨酸共掺杂的、具有中空纤维结构的TiO₂光催化材料, 利用扫描电子显微镜、X射线衍射、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征. 以苯酚溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能. 结果表明,用模板法制备的TiO₂纤维材料具有中空结构,共掺杂的TiO₂纤维在紫外和可见光条件下较纯TiO₂纤维和单掺杂TiO₂纤维对苯酚溶液具有更好的光催化降解效果, 且铈和磷钨酸的掺杂量显著影响该纤维材料的催化性能;当铈掺杂量为0.3mol%和磷钨酸掺杂量为2mol%,在500 oC焙烧2 h所得中空纤维材料的催化性能最佳,4 h即可使苯酚溶液的降解率达98.5%;重复使用4次仍可使苯酚溶液的降解率保持在87%以上,且该催化剂材料易于离心分离去除.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.     

Study on the photocatalytic activity of TiN/TiO2 nanoparticle formed by ball milling

TiN/TiO₂ nanoparticle photocatalyst was prepared by ball milling of TiO₂ in H₂O solution doped with TiN. The photocatalyst was characterized by UV–Vis diffuse reflection spectroscopy, X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Based on the results of the characterization, the mechanism of the increase in photocatalytic activity was investigated. The results show that when the amount of doped TiN is 0.15 wt%, the photocatalytic activity of the TiN/TiO₂ is at its peak. Compared with TiO₂, the photoabsorption wavelength range of the TiN/TiO₂ photocatalyst red-shifts about 30 nm, and the photoabsorption intensity increases as well. The photocatalytic activities of the photocatalyst are higher than that of TiO₂ under UV and visible light irradiation. The increase of surface Ti³⁺ reactive center and the extension of the photoabsorption wavelength are the main factors for the increase in the photocatalytic activity of the TiN/TiO₂. Doped TiN neither changes the TiO₂ crystal phase nor creates new crystal phase by ball milling.     

Doping mode, band structure and photocatalytic mechanism of B-N-codoped TiO2

The photocatalyst B and N codoped TiO₂ (B-N-TiO₂) was prepared via the sol-gel method by using boric acid and ammonia as B and N precursors. The doping mode, band structure and photocatalytic mechanism of B-N-TiO₂ were investigated well and elucidated in detail. B-N-TiO₂ showed the narrowed band gap and thus extended the optical absorption due to interstitial N and [NOB] species in the TiO₂ crystal lattice. The coexistence of interstitial N and [NOB] species in the TiO₂ crystal lattice and surface NO_x species allowed the more efficient utilization of visible light. Simultaneously, interstitial [NOB] and N species and surface B₂O₃ and NO_x species facilitated the separation of photo generated electrons and holes and suppress their recombination effectively. Hence, B-N-TiO₂ showed a higher photocatalytic activity than pure TiO₂, N-doped TiO₂ (N-TiO₂) and B-doped TiO₂ (B-TiO₂) under both UV and visible light irradiation.     

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

The layered perovskite type oxides, K₂La₂Ti₃O₁₀ and zinc(Zn)-doped K₂La₂Ti₃O₁₀ were prepared by sol-gel method and were characterized by power X-ray diffraction, UV-vis diffuse reflectance and X-ray photoelectron spectroscopy. The photocatalytic activity for water splitting of the catalyst powders was investigated with I⁻ as electron donor under ultraviolet and visible light irradiation respectively. The electronic structure of the powders has been analyzed by the first principles calculation, which reveals the photo responses in the visible region and the improvement of the photocatalytic activity of K₂La₂Ti₃O₁₀. Conclusions were made that zinc(Zn)-doped K₂La₂Ti₃O₁₀ exhibited higher reactivity for hydrogen production. When I⁻ was used as electron donor, the optimum doping concentration of zinc(Zn) was found to be 0.015:1 (n_Zn:n_Ti). The average hydrogen production rates were 126.6 μmol/(gcat h) under ultraviolet irradiation and 55.5 μmol/(gcat h) under visible light irradiation which were raised by 131% and 251% compared with undoped K₂La₂Ti₃O₁₀ photocatalyst, respectively.     

Electronic and optical properties of pure and Mo doped anatase TiO2 using GGA and GGA+U calculations

Comparative GGA and GGA+U calculations for pure and Mo doped anatase TiO₂ are performed based on first principle theory, whose results show that GGA+U calculation provide more reliable results as compared to the experimental findings. The direct band gap nature of the anatase TiO₂ is confirmed, both by using GGA and GGA+U calculations. Mo doping in anatase TiO₂ narrows the band gap of TiO₂ by introducing Mo 4d states below the conduction band minimum. Significant reduction of the band gap of anatase TiO₂ is found with increasing Mo doping concentration due to the introduction of widely distributed Mo 4d states below the conduction band minimum. The increase in the width of the conduction band with increasing doping concentration shows enhancement in the conductivity which may be helpful in increasing electron–hole pairs separation and consequently decreases the carrier recombination. The Mo doped anatase TiO₂ exhibits the n-type characteristic due to the shifting of Fermi level from the top of the valence band to the bottom of the conduction band. Furthermore, a shift in the absorption edge towards visible light region is apparent from the absorption spectrum which will enhance its photocatalytic activity. All the doped models have depicted visible light absorption and the absorption peaks shift towards higher energies in the visible region with increasing doping concentration. Our results describe the way to tailor the band gap of anatase TiO₂ by changing Mo doping concentration. The Mo doped anatase TiO₂ will be a very useful photocatalyst with enhanced visible light photocatalytic activity.     

First-principles study on anatase TiO2 codoped with nitrogen and praseodymium

The crystal structures, electronic structures and optical properties of nitrogen or/and praseodymium doped anatase TiO₂ were calculated by first principles with the plane-wave ultrasoft pseudopotential method based on density functional theory. Highly efficient visible-light-induced nitrogen or/and praseodymium doped anatase TiO₂ nanocrystal photocatalyst were synthesized by a microwave chemical method. The calculated results show that the photocatalytic activity of TiO₂ can be enhanced by N doping or Pr doping, and can be further enhanced by N+Pr codoping. The band gap change of the codoping TiO₂ is more obvious than that of the single ion doping, which results in the red shift of the optical absorption edges. The results are of great significance for the understanding and further development of visible-light response high activity modified TiO₂ photocatalyst. The photocatalytic activity of the samples for methyl blue degradation was investigated under the irradiation of fluorescent light. The experimental results show that the codoping TiO₂ photocatalytic activity is obviously higher than that of the single ion doping. The experimental results accord with the calculated results.     

Enhanced visible light photocatalytic properties of Fe-doped TiO2 nanorod clusters and monodispersed nanoparticles

In order to get photocatalysts with desired morphologies and enhanced visible light responses, the Fe-doped TiO₂ nanorod clusters and monodispersed nanoparticles were prepared by modified hydrothermal and solvothermal method, respectively. The microstructures and morphologies of TiO₂ crystals can be controlled by restraining the hydrolytic reaction rates. The Fe-doped photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis absorption spectroscopy (UV-vis), N₂ adsorption-desorption measurement (BET), and photoluminescence spectroscopy (PL). The refinements of the microstructures and morphologies result in the enhancement of the specific surface areas. The Fe³⁺-dopants in TiO₂ lattices not only lead to the significantly extending of the optical responses from UV to visible region but also diminish the recombination rates of the electrons and holes. The photocatalytic activities were evaluated by photocatalytic decomposition of formaldehyde in air under visible light illumination. Compared with P25 (TiO₂) and N-doped TiO₂ nanoparticles, the Fe-doped photocatalysts show high photocatalytic activities under visible light.     

Preparation of visible light responsive N doped TiO2 via a reduction-nitridation procedure by nonthermal plasma treatment

A visible light responsive N-doped TiO₂ was prepared via a reduction-nitridation procedure by nonthermal plasma treatment. X-ray diffraction, N₂ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared TiO₂ samples. The plasma treatment did not change the phase composition and particle sizes of TiO₂ samples, but extended its absorption edges to the visible light region. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of TiO₂ prepared by reduction-nitridation procedure were much higher than that of samples prepared by simple nitridation treatment. The enhanced activity was ascribed to the substitutional N-doping and appropriate concentration of oxygen vacancies. TOHN10 prepared by reduction-nitridation procedure exhibited excellent photocatalytic stability. A possible mechanism for the photocatalysis was proposed.     

The enhanced photocatalytic activity of CdS/TiO2 nanocomposites by controlling CdS dispersion on TiO2 nanotubes

CdS/TiO₂ nanocomposites were prepared via a simple wet chemical method, and characterized through X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their ability to degrade Acid Rhodamine B was investigated under visible light irradiation. The results indicate that CdS/TiO₂ nanocomposite with a mass ratio of 4:1(TiO₂:CdS) showed high photocatalytic activity and the CdS loaded on TiO₂ nanotube surface exhibited a hexagonal phase. The dispersion of CdS on TiO₂ nanotube surface had an important effect on the degradation efficiency of pollutant, which provides a strategy for practical industry application.     

Synthesis and photocatalytic oxidation of different organic dyes by using Mn2O3/TiO2 solid solution and visible light

Mn₂O₃/TiO₂ solid solution was prepared from two different oxides, manganese oxide (from KMnO₄ and ethanol) and TiO₂, these samples were characterized by BET, XRD, EDAX, SEM, FT-IR, ESR, XPS and UV–vis absorption spectroscopy. Photocatalytic activities of Mn₂O₃/TiO₂ powder was investigated by photooxidation of different dyes like Rhodamine B, thymol blue, methyl orange and Bromocresol green under visible light (300-W Xe lamp; λ > 420 nm). The results show that the alloy of TiO₂ with 1 mol% of Mn₂O₃ (MNT1) exhibit photocatalytic activity 3–5 times higher than that of P25 TiO₂ for oxidation of various dyes (RB, TB, MO and BG). The average particle size and crystallite size of MNT1 were found to be 100 nm and 12 nm measured from SEM and XRD, respectively. The EPR spectra of the Mn₂O₃/TiO₂ samples is a sharp five-line Mn(III) component centered on g_eff = 1.99.     

Preparation of photocatalytic Fe2O3-TiO2 coatings in one step by metal organic chemical vapor deposition

There are two major difficulties in the TiO₂ liquid-solid photocatalytic system: effective immobilization of the TiO₂ particles; and improving the catalytic activity under visible light. To simultaneously solve these two problems, Fe₂O₃-TiO₂ coatings supported on activated carbon fiber (ACF), have been prepared in one step by a convenient and efficient method—metal organic chemical vapor deposition (MOCVD). XRD results revealed that Fe₂O₃-TiO₂ coatings mainly composed of anatase TiO₂, α-Fe₂O₃ phases and little Fe₂Ti₃O₉. The pore structure of ACF was preserved well after loading with Fe₂O₃-TiO₂ coatings. UV-vis diffuse reflectance spectra showed a slight shift to longer wavelengths and an enhancement of the absorption in the visible region for Fe₂O₃-TiO₂ coatings, compared to the pure TiO₂ sample. A moderate Fe₂O₃-TiO₂ loading (13.7 wt%) was beneficial to mineralizing wastewater because the intermediates could be adsorbed onto the surface of photocatalyst following decomposition. The stable performance revealed that the Fe₂O₃-TiO₂ coatings were strongly adhered to the ACF surface, and the as prepared catalysts could be reused showing potential application for wastewater treatment.     

A novel Ce, C-codoped TiO2 nanoparticles and its photocatalytic activity under visible light

A novel photocatalyst (Ce, C-codoped titania) was synthesized through a modified sol-gel method under mild condition. The as-prepared sample was investigated by XRD, SEM, DRS and XPS. It was found that the as-prepared photocatalyst was composed of spheroidal particles, which were smaller than undoped ones. The absorbance spectrum of Ce, C-codoped TiO₂ exhibited significant red-shift to visible region. It can be ascribed to appearance of a new electronic state in the middle of the TiO₂ band-gap. Furthermore, cerium doping could slow the radiative recombination process of photogenerated electrons and holes in TiO₂. Accordingly, for degradation of dye Reactive Brillint Red X-3B (C.I. reactive red 2) under visible light, the photocatalytic activity of Ce, C-codoped TiO₂ improved much compared to other samples (C-doped TiO₂, undoped TiO₂ and P25).     

Sol-gel derived S,I-codoped mesoporous TiO2 photocatalyst with high visible-light photocatalytic activity

A mesoporous S,I-codoped TiO₂ photocatalyst with high visible light photocatalytic activity was synthesized through the hydrolysis and condensation of titanium isopropoxide with thiourea and iodic acid as the precursors. The as-prepared catalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), UV-vis diffuse reflectance (DRS), X-ray photoelectron spectroscopy (XPS), Fourier translation infrared spectroscopy (FT-IR), and N₂ adsorption. The results showed that the cations of S⁶⁺ and I⁵⁺ could substitute for some of the lattice titanium (Ti⁴⁺). The S,I-codoping forms the new bands above the valence band and narrows the band-gap of the TiO₂, then shifts the absorption edge from UV light region to visible light range. The activity of the catalyst was examined by photodegradation of methylene blue in an aqueous solution under visible light irradiation. The activity of the S,I-codoped catalyst is far superior to that of single S or I-doped TiO₂ counterpart. The high visible light photocatalytic activity could be attributed to the strong absorption of light, well-crystalline anatase phase, and mesoporous microstructure.     

Preparation and visible light photocatalytic activity of mesoporous N, S-codoped TiO2(B) nanobelts

The mesoporous N, S-codoped TiO₂(B) nanobelts are synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption measurements (BET), X-ray photoelectron spectra (XPS), and UV-vis diffuse reflectance spectra (DRS). The results show that the prepared samples are mesoporous structured and exhibit stronger absorption in the visible light region with red shift in the absorption edge. The photocatalytic activity of N, S-codoped mesoporous TiO₂(B) nanobelts is evaluated by the photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It is found that the photocatalytic activity of the prepared samples increases with increasing the molar ratio of thiourea to Ti (R). At R = 3, the photocatalytic activity of the N, S-codoped TiO₂(B) sample TBLTS-3 reaches a maximum value. With further increasing R, the photocatalytic activity of the sample decreases. The high photocatalytic activity of N, S-codoped TiO₂(B) nanobelts can be attributed to the balance between strong absorption in visible light region and low recombination rate of electron/hole pairs.