Preparation of C30 concrete and its adsorption performance for Cs(I)

Journal of Radioanalytical and Nuclear Chemistry - The preparation of C30 concrete for a cavernous waste repository under construction in China and its Cs(I) adsorption performance were...     

Hydrogel-Derived Honeycomb Ni3S4/N,P-C as an Efficient Oxygen Evolution Catalyst

The development of high-efficiency electrocatalysts with low costs for the oxygen evolution reaction (OER) is essential, but remains challenging. Herein, a new synthetic process is proposed to prepare Ni₃S₄ particles embedded in N,P-codoped honeycomb porous carbon aerogels (Ni₃S₄/N,P-HPC) through a hydrogel approach. The preparation of Ni₃S₄/N,P-HPC begins with the sol–gel polymerization of tripolyphosphate, chitosan, and guanidine polymer that contains metal-binding sites, allowing for the uniform incorporation of Ni ions into the gel matrix, freeze-drying, and subsequent carbonization under an inert atmosphere. This synthesis resolves difficulties in synthesizing the pure Ni₃S₄ phase caused by the instability of Ni₃S₄ at high temperature, while affording good control of the porous structure and N,P-doping of carbon aerogels. The synergy between the structural advantages of N,P-carbon aerogels (such as easily accessible active sites, high specific surface area, and excellent electron transport) and the intrinsic electrochemical properties of Ni₃S₄ result in the outstanding OER performance of Ni₃S₄/N,P-HPC, with overpotentials as low as 0.37 V at 10 mA cm⁻². The work outlined herein offers a simple and effective method for the development of carbon-based electrocatalysts for renewable energy conversion.     

Double dehydrogenation of carbocyclic β-dicarbonyl compounds:Koser's reagent can do what iodine(V) reagents can

Koser's reagent is found to be effective in the oxidative double dehydrogenation of various carbocyclic β-dicarbonyl compounds,which constitutes the first example on dehydrogenation reactivity of hypervalent iodine(Ⅲ) reagents for carbocyclic carbonyl compounds. DFT calculations reveal that the rate-determining step is the electrophilic addition of PhI+OH onto enolate of monodehydrogenated product.     

Alkylation of Allyl/Alkenyl Sulfones by Deoxygenation of Alkoxyl Radicals

A challenging deoxygenation of alkoxyl radicals from readily accessible alcohol derivatives was developed, affording facile synthesis of functionalized alkenes with good functional group tolerance under mild reaction conditions. Because alkoxyl radicals can easily undergo β-fragmentations or hydrogen abstractions, this new strategy for deoxygenation of alkoxyl radicals is highly valuable. Moreover, mechanistic studies revealed that the electron-neutral phosphine acts as the deoxygenation reagent.     

电化学还原二氧化碳合成碳材料电催化还原氧气合成过氧化氢北大核心CSCD

研究了3种不同阳极(铜丝,镀锌铁丝和镍丝)材料对在熔盐中电化学还原CO_(2)制备的碳材料结构和形貌的影响,并探究了制备的3种碳材料,中空四面体碳(HQC,Cu作为阳极时的还原产物)、碳纳米片(CNS,Fe作为阳极时的还原产物)和海绵状多孔碳(SPC,Ni作为阳极时的还原产物),对2电子氧还原反应(2e;ORR)的电催化性能。研究表明,使用镀锌铁丝作为阳极材料制备的CNS由大量的碳纳米片构成,且该纳米片上具有丰富的孔洞结构以及较大的I_(D)/I_(C)(Raman光谱中D峰与G峰的强度之比,其比值反映材料的缺陷程度)值(0.996)。与HQC和SPC相比,CNS表现出最高的2e;ORR电催化活性和H_(2)O_(2)选择性(接近90%)。CNS的高活性和高选择性归因于其高的I_(D)/I_(C)值和高C—O/C=O比值,说明结构缺陷和C—O/C=O官能团对CNS催化性能至关重要。此外,CNS还具有非常优异的电催化稳定性,在长达14 h的恒电压电化学催化测试后,环电流几乎无衰减。这种以CO_(2)为碳源合成可用于电催化合成过氧化氢(H_(2)O_(2))的碳材料的方法,不仅可以作为缓解温室效应的潜在选项,也为CO_(2)衍生碳的实际应用提供了新的思路。     

不同退火条件对PEALD制备的Ga2O3薄膜特性的影响

利用等离子增强原子层沉积技术(PEALD)在c面蓝宝石衬底上制备了氧化镓(Ga₂O₃)薄膜,研究了退火气氛(v(N₂)∶v(O₂)=1∶1(体积比)、空气和N₂)及退火时间对Ga₂O₃薄膜晶体结构、表面形貌和光学性质的影响。研究结果表明,退火前的氧化镓处于亚稳态,不同退火气氛下退火后晶体结构发生明显改变,而且退火气氛中N₂比例增加有利于Ga₂O₃重结晶。在N₂气氛下退火达到30 min,薄膜结构已由亚稳态转变成择优取向的β-Ga₂O₃。而且表面形貌分析表明,退火30 min后表面形貌开始趋于稳定,表面晶粒密度不再增加。另外实验样品在 400~800 nm的平均透射率几乎是100%,且光吸收边陡峭。采用N₂气氛退火,对于富氧环境下沉积的Ga₂O₃更利于薄膜表面原子迁移,以及择优取向Ga₂O₃重结晶。     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236     

Interim Anatase Coating Layer Stabilizes Rutile@CrxOy Photoanode for Visible‐Light‐Driven Water Oxidation

Ternary core–shell heterostructured rutile@anatase@Cr_xO_y nanorod arrays were elaborately designed as photoanodes for efficient photoelectrochemical water splitting under visible‐light illumination. The four‐fold enhanced and stabilized visible‐light photocurrent highlights the unique role of the interim anatase layer in accelerating the interfacial charge transfer from the Cr_xO_y chromophore to rutile nanorods.     

Catalytic Performance of Amorphous Ti/SiO2 in the Gas-Phase Epoxidation of Propylene with H2O2

The epoxidation of propylene with dilute H₂O₂ aqueous solution over titanium silicalite-1 (TS-1) zeolite catalyst is a green chemical reaction for propylene oxide (PO) production. Carrying out the reaction in gas-phase can get rid of problems caused by using methanol solvent. This paper reports an attempt of using non-zeolite catalyst for the gas-phase epoxidation. Amorphous Ti/SiO₂, obtained by grafting amorphous SiO₂ with TCl₄ in ethanol solvent in a chemical liquid-phase deposition (CLD) process, has been used as the catalyst. Results show that the CLD Ti/SiO₂ with appropriate Si/Ti molar ratio is an active catalyst for gas-phase epoxidation, achieving 9.8 % propylene conversion and 66.9 % PO selectivity with 40.3 % H₂O₂ utilization, which indicates that this amorphous Ti/SiO₂ catalyst deserves extensive studies in the future.