基于图形化生长纳米氧化锌场致发射阴极阵列的研究

采用光刻技术在覆盖有氧化锌(ZnO)薄膜的ITO玻璃片衬底上实现图形化生长,结合水热法在衬底上制备出结构完整、排列一致的ZnO矩形和圆环型单元阵列。在图形化的基础上二次生长ZnO纳米锥阵列,锥长度最大可达到10μm,远大于一次生长的长度,并且发现锥顶有很多精细的类似针状的纳米量级微细结构。分析了非图形化、图形化一次以及图形化二次生长的ZnO纳米锥阵列的场致发射性能。使用图形化二次生长的ZnO纳米锥阴极阵列制作了12.7cm(5inch)的场发射显示器(FED),能实现全屏发光。实验结果表明,图形化二次生长的ZnO纳米锥阵列发射电流密度为最大,可达0.6mA/cm2,其开启场强为2.5V/μm。图形化生长ZnO纳米锥的方法是一种能较好改善材料场发射性能的好方法,为寻求良好场发射性能材料的制备提供了一条有效的实验途径。     

增强碳纳米管场发射性能的沟槽形冷阴极制作(英文)

基于烧结工艺和丝网印刷技术,研发了一种新的沟槽形冷阴极.底部绝缘层由黑色绝缘浆料被烧结后制成,且在底部绝缘层中存在倾斜面.将银浆丝网印刷在条形电极上,依次经烘烤和烧结工艺后形成银电极.利用细砂纸,对银电极进行适当的抛光工艺,以便获得光滑的电极表面.由于特有的银电极形状,从而易于获得更大的场增强因子.将碳纳米管制备在银电极上,形成场发射极.致密的碳纳米管层完全覆盖银电极表面,特有的边缘场增强效应能够使得碳纳米管发射出更多的电子.顶部绝缘层则用于抑制碳纳米管的横向电子发射.结合沟槽形冷阴极,制作了三极结构的场致发射显示器,该显示器具有良好的场致发射特性及优良的发光图像均匀性.与普通冷阴极场致发射显示器相比,沟槽形冷阴极场致发射显示器能够将开启电场从1.86V/μm降低到1.78V/μm,将最大场致发射电流从1 537μA增加到2 863μA,且将最大发光图像亮度从1 386cd/m2提高到1 865cd/m2.该制作技术在场致发射显示器中具有较强的实际应用性.     

生长温度对纳米氧化锌场发射性能的影响

采用锌粉和银粉为蒸发源,用热蒸发法不同温度下制备了四针状纳米氧化锌,并以单独的锌粉做对照。采用扫描电子显微镜(SEM)观察其形貌,X射线衍射(XRD)谱表征其晶体结构。采用丝网印刷方法将其制备为场致电子发射阴极,将阴极与印刷有荧光粉的阳极板组装成二极结构场致发射显示屏,并进行了场致电子发射特性对比实验。结果表明较高温度制备的氧化锌具有较好的场致发射性能;掺杂银粉的蒸发源制备的样品的发射性能明显优于没有掺杂银粉的样品。实验证明ZnO是一种优良的场致发射冷阴极材料,在真空电子方面具有广阔的应用前景。     

白碳纳米晶薄膜及其场致电子发射特性

利用微波等离子体化学气相沉积方法,以甲烷、氢混合气体为反应气体,具有钛镀层的玻璃作为衬底,制备了具有sp¹杂化结构的白碳纳米晶薄膜。利用X射线衍射、俄歇电子能谱,以及扫描电子显微镜对薄膜结构进行了表征。以白碳纳米晶薄膜为阴极,以镀有ITO透明导电薄膜玻璃为阳极,采用二极管结构,测试了白碳纳米晶薄膜的场致电子发射特性。开启电场为2.5 V/μm,在电场为5 V/μm时的电流密度为200μA/cm²。对白碳纳米晶薄膜生长机理,以及其场致电子发射机制进行了讨论。     

碳纳米管冷阴极脉冲发射特性及仿真模型研究

针对碳纳米管场致发射冷阴极在微波、毫米波电真空辐射源器件中的应用需求,采用2μs,20 kV的脉冲高压对碳纳米管场致发射冷阴极的脉冲发射特性进行了实验研究.通过改变阴阳极间距,对碳纳米管冷阴极发射电流特性及发生脉冲高压打火后的碳纳米管冷阴极发射特性进行了测试研究.在直径为4 mm的圆形平面碳纳米管冷阴极上获得最大发射电流16 mA,电流密度为127 mA/cm~2.以实验测试数据为基础,结合粒子模拟软件建立碳纳米管冷阴极场致发射仿真模型,给出了该仿真模型的相关参数,为下一步设计研制碳纳米管冷阴极电子光学系统及相关辐射源器件奠定基础.     

栅网结构碳纳米管冷阴极电子光学系统的设计

基于碳纳米管冷阴极实验测试结果,采用三维粒子模拟软件对大面积碳纳米管冷阴极的场致发射特性进行了仿真,研究了栅网结构不同尺寸对碳纳米管冷阴极场致发射特性及电子注通过率的影响,并在此基础上设计出面积压缩比为18,输出电流密度为14.9 A/cm2的带状注电子枪。为进一步研制碳纳米管冷阴极电子光学系统和相关微波、毫米波电真空辐射源器件提供了技术基础。     

两步化学沉积法制备ZnO薄膜及其场发射特性

在低温常压条件下,以ITO玻璃为衬底,采用电化学法与湿化学法结合的两步化学沉积法制备了团簇状ZnO薄膜。利用XRD,SEM分析了薄膜结构和表面形貌,并采用二极管结构在高真空条件下对薄膜进行了场发射性能测试。稳定发射后,开启电场为3.0 V/μm。当电场为5.8 V/μm时,电流密度为583.3 μA/cm²。研究表明:两步化学沉积法低温制备ZnO薄膜是可行的,且该薄膜具有良好的场发射性能。     

ZnO纳米棒的低温溶液法制备、光电特性研究及其在有机/无机复合电致发光中的应用

利用水热法制备了垂直于衬底的定向生长的ZnO纳米棒,利用扫描电子显微镜及光致发光的方法对其形貌及光学特性进行了表征,利用场发射性能测试装置对ZnO纳米棒的场发射性能进行了测试.结果表明:利用水热法在较低的温度(95 ℃) 下生长了具有较好形貌和结构的ZnO纳米棒,并表现出了较好的场发射特性,当电流密度为1 μA/cm²时,开启电场是2.8 V/μm,当电场为6.4 V/μm时,电流密度可以达到0.67 mA/cm²,场增强因子为3360.稳定性测试表明,在5 h内,4.5 V/μm的电场下,其波动不超过25%.将制备的ZnO纳米棒应用到有机/无机电致发光中,其中ZnO纳米棒为电子传输层,m-MTDATA(4,4',4″-tris{N,(3-methylphenyl)-N-phenylamino}-triphenylamine) 为空穴传输层,得到了ZnO的342 nm的紫外电致发光,此发光较ZnO纳米棒光致发光的紫外发射有约40 nm的蓝移. 关键词： ZnO纳米棒 场发射 水热法 有机/无机复合电致发光     

ZnO纳米线阵列的定向生长、光致发光及场发射性能

采用光刻和脉冲准分子激光沉积技术在Si衬底上制备了图形化的ZnO种子层薄膜。分别采用气相输运和水热合成法,制备了最小单元为30μm的图形化的垂直定向生长的ZnO纳米线阵列。X射线衍射(XRD)分析显示ZnO纳米线阵列具有高度的c轴[001]择优取向生长特性。从扫描电子显微镜(SEM)照片看出,阵列图形完整清晰,边缘整齐。纳米线阵列室温下光致发光(PL)谱线中在380nm左右具有强烈的紫外发射峰,可见光区域发射峰得到了抑制,证明ZnO纳米线缺陷少,晶体质量高。场致电子发射测量表明,ZnO纳米线阵列开启电场和阈值电场分别为2.3,4.2V/μm,具有较好的场致电子发射性能。     

类球状微米金刚石聚晶的场发射

在覆盖金属钛层的陶瓷上,采用微波等离子体化学气相沉积(MPCVD)法制备出类球状微米金刚石聚晶薄膜。利用扫描电子显微镜、拉曼光谱,X射线衍射,分析了薄膜的结构和表面形貌。测试了类球状微米金刚石聚晶膜的场致电子发射特性。开启电场仅为0.55V/μm,在2.18V/μm的电场下,其场发射电流密度高达11mA/cm2。仔细分析了膜的发射过程,发现类球状微米金刚石聚晶的结构对发射有很大影响,并对其发射机理进行了研究。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.