高比表面积TiO2与g-C3N4复合材料的光催化性能及机理研究

本文通过简单的溶剂热法制备了g-C₃N₄与高比表面积的TiO₂复合材料,该方法操作简单且能耗低. 甲基橙降解实验结果表明,高比表面积的TiO₂有效提高了光催化活性. 光电化学测试结果表明,与g-C₃N₄复合后,TiO₂的电荷载流子迁移速率得到明显改善. g-C₃N₄/高比表面积-TiO₂的光催化活性很强,在100分钟内,6%-g-C₃N₄/高比表面积-TiO₂对甲基橙的降解程度可达92.44%. 6%-g-C₃N₄/高比表面积-TiO₂不仅具有良好的光催化降解性能,还具有较高的稳定性. 本文对6%-g-C₃N₄/高比表面积-TiO₂的光催化机理也进行了系统的研究.     

g-C3N4/SnS2异质结构:一类有潜力的光解水催化剂

采用第一性原理方法研究了层间耦合作用对g-C₃N₄/SnS₂异质结构的电子结构和吸光性质的影响.发现g-C₃N₄/SnS₂是一类典型的范德瓦异质结构,能有效吸收可见光,其价带顶和导带底与水的氧化还原势匹配,且由于电荷转移而导致的界面处极化场有利于光生载流子的分离.这些理论研究结果表明g-C₃N₄/SnS₂异质结构是一类非常有潜力的光解水催化材料.     

强冲击压缩条件下g-C3N4向β-C3N4直接转化

 为了合成出理论预言的具有致密结构的超硬材料C₃N₄,运用二级轻气炮加载和冲击回收实验技术,以富含N的g-C₃N₄为前驱物,在40~65 GPa压力下完成了冲击合成实验。在低于51 GPa压力时,X射线衍射分析表明,在回收样品中未发现有新相生成,说明g-C₃N₄是稳定的;而在51~65 GPa范围内,回收样品中有新相生成,与理论计算结果对照发现,新相为β-C₃N₄相,且不含其它结晶相。证实利用冲击合成方法将g-C₃N₄直接转化为单纯β-C₃N₄是可能的,对纯净的超硬相碳氮化合物的合成研究具有参考意义。     

掺杂质子化石墨相氮化碳增强碳基太阳能电池中钙钛矿的结晶

钙钛矿层的品质极大影响钙钛矿太阳能电池性能. 然而,在溶液法生成多晶钙钛矿膜过程中会不可避免地形成缺陷和陷阱位. 通过在钙钛矿层中嵌入添加物改善钙钛矿晶化,用于减少和钝化缺陷是非常重要的. 本文合成一种环境友好的二维纳米材料质子化石墨相氮化碳(p-g-C₃N₄),并掺杂于碳基钙太阳能电池的钙钛矿层中. 实验证明,在钙钛矿前驱体溶液中添加p-g-C₃N₄不仅能调解碘铅甲胺(MAPbI₃)结晶的成核和生长速率,获得大晶粒尺寸的平滑表面,还能减少钙钛矿层的本征缺陷. 质子化过程在氮化碳表面引入活性基团-NH₂/-NH₃,它们和钙钛矿晶体表面N-H键发生强化学作用,有效地钝化电子陷阱,提高钙钛矿结晶质量. 结果表明,与不掺杂的对照电池(效率为4.48%)和掺杂石墨相氮化碳(g-C₃N₄)电池(效率为5.93%)相比,掺杂质子化石墨相氮化碳(p-g-C₃N₄)的电池获得了6.61%的较高效率. 本工作展示了一种通过掺杂改性添加物改善钙钛矿膜的简单方法,为碳基钙钛矿太阳能电池的低成本制备提供了建议.     

C3N4的高温高压同步辐射研究

利用激光加热金刚石对顶砧技术在高温高压条件下合成了纯beta相和立方相C₃N₄beta相C₃N₄所属对称群为P63/M (176).对石墨相与beta相C₃N₄的X射线衍射结果进行了精确分析, 得到优化晶胞参数.原位高压同步辐射X射线衍射分析表明, 在6GPa时由beta相到立方相C₃N₄的相转变已经发生, 之后两相共存直到19GPa时相变结束得到纯立方相C₃N₄.     

ECR-PECVD制备Si3N4薄膜的光学特性研究

本文研究了ECR-PECVD制备的Si₃N₄薄膜的光学特性.得到的Si₃N₄薄膜具有光致发光效应,在280℃沉积制备的Si₃N₄薄膜的光致发光波长为400nm,具有较好的单色性.测试分析了Si₃N₄薄膜对可见光、红外光具有较高的透射性能,Si₃N₄薄膜可作为红外光的增速减反射膜.     

基于非金属掺杂g-C3N4的均匀B-C-N三相单层

基于第一性原理方法计算,通过在g-C₃N₄中掺杂C、B和N原子, 预测了四种元素均匀分布的B-C-N三元单层材料． 除了B₄-C₃N₄单层材料是一个具有1.18 eV带隙的半导体, 其余三种C-B-N三元单层材料都是金属材料．其中,B₃C-C₃N₄是铁磁金属,其净磁矩为0.57 μB/原胞,可用于构建自旋电子器件材料．计算的形成能显     

合成氨钌催化剂的晶体和形貌敏感性

哈伯-博施法合成氨反应是高温高压的耗能过程,因此降低该过程的能量消耗及开发温和条件下合成氨反应催化剂具有重要意义. 金属钌是合成氨反应中最有前途的催化剂之一,一直备受广泛关注. 确定金属钌催化剂的结构敏感性并提高其比质量活性是多相催化中亟待解决的重要问题. 氮气(N₂)活化是合成氨反应中的关键步骤. 本文通过第一性原理理论计算和微观动力学模拟方法系统研究了具有六方密排和面心立方晶体结构的钌催化剂上N₂活化过程和N₂解离反应速率. 理论计算研究表明,在六方密排Ru形貌中,{2130}晶面具有最高的N₂解离活性,其次是{0001}台阶面,它们比六方密排Ru其他表面上N₂解离反应速率高3个数量级以上;在面心立方Ru形貌中,{211}和{311}表面上N₂解离活性最高. 这些结果都表明台阶面/台阶位对氮气活化至关重要. 虽然六方密排Ru {2130}晶面具有最低的N₂解离能垒,然而由于面心立方Ru上可以暴露更高密度的活性位点,使得面心立方Ru比六方密排Ru具有更高的N₂转化速率. 本研究深入理解了N₂解离过程中,金属Ru 催化剂形貌和晶相结构敏感性,这为设计和优化高活性的合成氨Ru催化剂提供了理论基础.     

Si3N4的晶体化和ZrN/Si3N4纳米多层膜的超硬效应

研究了Si₃N₄层在ZrN/Si₃N₄纳米多层膜中的晶化现象及其对多层膜微结构与力学性能的影响. 一系列不同Si₃N₄层厚度的ZrN/Si₃N₄纳米多层膜通过反应磁控溅射法制备. 利用X射线衍射仪、高分辨透射电子显微镜和微力学探针表征了多层膜的微结构和力学性能. 结果表明，由于受到ZrN调制层晶体结构的模板作用，溅射条件下以非晶态存在的Si₃N₄层在其厚度小于0.9 nm时被强制晶化为NaCl结构的赝晶体，ZrN/Si₃N₄纳米多层膜形成共格外延生长的柱状晶，并相应地产生硬度升高的超硬效应. Si₃N₄随层厚的进一步增加又转变为非晶态，多层膜的共格生长结构因而受到破坏，其硬度也随之降低.     

γ-Si3N4在高压下的电子结构和物理性质研究

采用基于密度泛函平面波赝势方法(PWP)和广义梯度近似(GGA-PW91)，计算了不同压强下γ-Si₃N₄的电子结构、光学性质和力学性质.基于计算结果，分析讨论了γ-Si₃N₄各物理参数随外压力的变化规律.计算表明，γ-Si₃N₄是一种适合于在高压条件下工作的材料.     

Synergistic effect of efficient adsorption g-C3N4/ZnO composite for photocatalytic property

Novel g-C₃N₄/ZnO composite photocatalyst was synthesized from an oxygen-containing precursor by direct thermal decomposition urea in air without any other templates assistance. Different percentages of g-C₃N₄ were hybridized with ZnO via the monolayer-dispersed method. The prepared g-C₃N₄/ZnO composites were characterized by XRD, SEM, UV–vis diffuse reflectance spectra (DRS), FT-IR, TEM and XPS. The composites showed much higher efficiency for degradation of Rhodamine B (RhB) than ZnO under UV and visible light irradiation. Especially, the photocatalytic efficiency was the highest under UV light irradiation when the percentage of g-C₃N₄ was 6%. The improved photocatalytic activity may be due to synergistic effect of photon acquisition and direct contact between organic dyestuff and photocatalyst. Then, effective separation of photogenerated electron–hole pairs at the interface of g-C₃N₄ is an important factor for improvement of photocatalytic activity. This work indicates that g-C₃N₄ hybrid semiconductors photocatalyst is a promising material in pollutants degradation.     

铈和磷钨酸共掺杂纳米二氧化钛中空纤维的制备及其光催化活性

以棉花纤维为模板,以钛酸四正丁酯、硝酸铈铵和磷钨酸为原料采用模板法制备了一系列铈和磷钨酸共掺杂的、具有中空纤维结构的TiO₂光催化材料, 利用扫描电子显微镜、X射线衍射、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征. 以苯酚溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能. 结果表明,用模板法制备的TiO₂纤维材料具有中空结构,共掺杂的TiO₂纤维在紫外和可见光条件下较纯TiO₂纤维和单掺杂TiO₂纤维对苯酚溶液具有更好的光催化降解效果, 且铈和磷钨酸的掺杂量显著影响该纤维材料的催化性能;当铈掺杂量为0.3mol%和磷钨酸掺杂量为2mol%,在500 oC焙烧2 h所得中空纤维材料的催化性能最佳,4 h即可使苯酚溶液的降解率达98.5%;重复使用4次仍可使苯酚溶液的降解率保持在87%以上,且该催化剂材料易于离心分离去除.     

Synthesis of urchin-like Co3O4 hierarchical micro/nanostructures and their photocatalytic activity

Urchin-like Co₃O₄ hierarchical micro/nanostructures have been successfully synthesized by calcining urchin-like precursor CoCO₃, which are prepared by a facile hydrothermal route. The particle size of the urchin-like Co₃O₄ could be easily controlled by altering the calcination temperature. The morphology and structure of the as-prepared urchin-like products were characterized by XRD, FESEM and TEM. Photocatalytic measurement demonstrates that these urchin-like Co₃O₄ micro/nanostructures show good photocatalytic effect and their degradation efficiency is strongly dependent on their particle size. Furthermore, a plausible reaction mechanism is also proposed to illustrate the photocatalytic processes of Co₃O₄.     

Preparation and characterization of amine-functionalized SiO2/TiO2 films for formaldehyde degradation

This paper investigated the gaseous formaldehyde degradation by the amine-functionalized SiO₂/TiO₂ photocatalytic films for improving indoor air quality. The films were synthesized via the co-condensation reaction of methyltrimethoxysilane (MTMOS) and 3-aminopropyltrimethoxysilane (APTMS). The physicochemical properties of prepared photocatalysts were characterized with N₂ adsorption/desorption isotherms measurement, X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FT/IR). The effect of amine-functional groups and the ratio of MTMOS/APTMS precursors on the formaldehyde adsorption and photocatalytic degradation were investigated. The results showed that the formaldehyde adsorption and photocatalytic degradation of the APTMS-functionalized SiO₂/TiO₂ film was higher than that of SiO₂/TiO₂ film due to the surface adsorption on amine sites and the relatively high of the specific surface area of the APTMS-functionalized SiO₂/TiO₂ film (15 times higher than SiO₂/TiO₂). The enhancement of the formaldehyde degradation of the film can be attributed to the synergetic effect of adsorption and subsequent photocatalytic decomposition. The repeatability of photocatalytic film was also tested and the degradation efficiency was 91.0% of initial efficiency after seven cycles.     

Flowerlike PtCl4/Bi2WO6 composite photocatalyst with enhanced visible-light-induced photocatalytic activity

Flowerlike PtCl₄/Bi₂WO₆ composite photocatalyst was successfully synthesized through a simple two-step method involving a template-free hydrothermal process and the following impregnation treatment. The samples were fully characterized by the study of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis absorption spectra. The results indicated that the doping of Pt species did not affect the crystal structure and the morphology of Bi₂WO₆ photocatalyst, but it had great influences on the photocatalytic activity of Bi₂WO₆ towards rhodamine-B (RhB) degradation. Besides, the Pt species was found to be present as PtCl₄ in the composite samples, and also an optimal Pt species content on the surface of Bi₂WO₆ photocatalyst was discovered with the highest photocatalytic ability. The improved photocatalytic performance could be ascribed to the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Meanwhile, a possible mechanism for RhB photocatalytic degradation over PtCl₄/Bi₂WO₆ catalyst was also proposed.     

Preparation and characterization of visible light responsive Fe2O3-TiO2 composites

In this study we present the effects of iron oxide (Fe₂O₃) on titanium dioxide (TiO₂) in synthesising visible-light reactive photocatalysts. A Fe₂O₃-TiO₂ composite photocatalyst was synthesized from Fe₂(SO₄)₃ and Ti(SO₄)₂ by a ethanol-assisted hydrothermal method. The preparation conditions were optimized through the investigation of the effects of hydrothermal temperature and time as well as molar ratio of Ti to Fe on the photocatalytic activity. The visual, physical and chemical properties of the Fe₂O₃-TiO₂ composites were investigated. The results showed that α-Fe₂O₃ and anatase TiO₂ were present in the composites. The Fe₂O₃-TiO₂ synthesized under optimum condition consisted of mesoporous structure with an average pore size of 4 nm and a surface area of 43 m²/g. Under visible and solar light irradiation, the photocatalytic activity of optimized sample was significantly higher than that of pure TiO₂. This sample led to a photodegradation efficiency of 90% and 40% of auramine under visible light and solar light, respectively.     

Hydrothermal synthesis of C-doped Zn3(OH)2V2O7 nanorods and their photocatalytic properties under visible light illumination

A visible light-driven photocatalyst, C-doped Zn₃(OH)₂V₂O₇, prepared by a hydrothermal method was studied. The as-prepared catalyst was characterized by SEM, XRD, DRS, and XPS, and exhibited efficient photocatalytic activity in the degradation of methylene blue (MB) under visible-light irradiation. Besides decoloring, the decomposition of MB was also observed, further demonstrating the performance of the photocatalyst. The carbon existing on the surface of Zn₃(OH)₂V₂O₇ nanorods was free and in carbide form. Dye degradation followed first-order kinetics, and was explained on the basis of the Langmuir-Hinshelwood mechanism.     

Structure and electronic structure of S-doped graphitic C3N4 investigated by density functional theory

The structures of the heptazine-based graphitic C3N4 and the S-doped graphitic C3N4 are investigated by using the density functional theory with a semi-empirical dispersion correction for the weak long-range interaction between layers.The corrugated structure is found to be energetically favorable for both the pure and the S-doped graphitic C3N4.The S doptant is prone to substitute the N atom bonded with only two nearest C atoms.The band structure calculation reveals that this kind of S doping causes a favorable red shift of the light absorption threshold and can improve the electroconductibility and the photocatalytic activity of the graphitic C3N4.