纳米级SiO2填充PVC/CPE复合材料研究

80年代以后发展起来的纳米材料被称为"21世纪最有前途的材料",已成为材料学中跨世纪的研究热点[1].纳米级无机粒子/聚合物复合材料是纳米材料中的一种具有重要价值的新型材料,可广泛应用于橡胶、塑料、纤维三大合成材料之中[2].其中,纳米级SiO2是纳米材料中的重要一员,它被称作跨世纪的高科技材料[3].因此, 本文就纳米级SiO2填充PVC/CPE复合材料进行探讨.     

制备聚合物基/纳米SiO2复合材料的几种方法

聚合物基纳米SiO2复合材料由于兼具无机二氧化硅和有机硅的特性而具有广阔的应用前景。将纳米SiO2和有机硅聚合物有效地复合,形成无机-聚合物复合材料,是一个非常活跃的领域。本文总结了几种常用的制备聚合物基纳米SiO2复合材料的方法。     

制备聚合物基无机纳米SiO_2复合材料的几种方法

聚合物基纳米SiO2复合材料由于兼具无机二氧化硅和有机硅的特性而具有广阔的应用前景。将纳米SiO2和有机硅聚合物有效地复合,形成无机-聚合物复合材料,是一个非常活跃的领域。本文总结了几种常用的制备聚合物基纳米SiO2复合材料的方法。     

原子转移自由基聚合接枝改性纳米SiO2的研究进展

纳米SiO2粒子极易团聚,在有机介质中难以均匀分散,从而大大地限制了其优异性能的发挥,有必要对其进行化学改性处理。原子转移自由基聚合(atom transfer radical polymerization,ATRP)是对纳米SiO2粒子进行接枝改性的一种有效途径,通过ATRP对纳米SiO2粒子进行表面改性,可以制备集无机纳米粒子和聚合物的优点于一身的SiO2-聚合物复合材料,且接枝链的长度及分子量分布可控,拓展了纳米SiO2的应用领域。本文主要综述了ATRP、RATRP(reverse ATRP)、AGET ATRP(activators generated by electron transferATRP)和ARGET ATRP(activators regenerated by electron transfer ATRP)方法对纳米SiO2接枝改性的研究现状。     

细乳液聚合法制备有机/无机纳米复合材料

无机纳米粒子的引入可以使聚合物材料获得抗菌、导电和防紫外等诸多特性,但无机纳米粒子在聚合物基质中易团聚、引入量少,难以充分发挥其优点。细乳液聚合法基于其独特的成核方式--液滴成核,能够提高无机纳米粒子在聚合物基中的分散性和引入量,且复合材料的形貌易于控制,是目前制备特殊形貌有机/无机纳米复合材料的一种有效手段。本文介绍了有机/无机复合纳米材料的细乳液制备过程,综述了近年来不同无机纳米粒子与有机基质复合的研究进展,例如：纳米SiO₂、纳米ZnO、金属纳米粒子、纳米氧化石墨烯等。最后就其发展现状提出了几点建议。     

团聚纳米SiO_2在苯乙烯乳液聚合过程中的再分散过程及机理

用二氧化硅 (SiO2 )存在下的乳液聚合法制备了聚苯乙烯 (PSt) 纳米SiO2 复合材料 ,研究了苯乙烯(St)乳液聚合过程中团聚纳米SiO2 的解离与再分散过程及分散的机理 .发现商品纳米SiO2 粒子以团聚体形式存在 ,团聚体大小远超出纳米级范围 .随聚合时间的延长 ,St的转化率逐渐增加 ,而PSt SiO2 复合微胶囊的粒径逐渐减小 ,反应 12 0min后 ,转化率和复合微胶囊粒子的粒径趋于稳定 .透射电镜 (TEM)也显示PSt SiO2 复合微胶囊粒子具有海岛结构 ,而SiO2 粒子的粒径在纳米范围内 ,表明在乳液聚合过程中SiO2 团聚体被逐渐解离 ,并重新分散到纳米尺度 .红外光谱研究发现 ,在乳液聚合过程中 ,除生成PSt均聚物外 ,还在纳米SiO2 表面生成了PSt接枝共聚物 ,改善了无机纳米粒子与聚合物之间的界面相容性 .聚合过程中的反应热和剪切搅拌是团聚体被解离和重新分散的主要原因 ,而生成的聚合物起到隔离作用     

无机纳米粒子在环氧树脂增韧改性中的应用

无机纳米粒子能够给聚合物赋以卓越的综合性能,为此,纳米材料在聚合物改性中的应用已成为聚合物改性领域中的一个研究热点。本文就近年来在环氧树脂增韧改性中应用的无机纳米粒子的种类、环氧树脂／无机纳米复合材料的制备方法及其应用研究进展进行了综述。     

γ辐照引发无皂乳液聚合法一步合成Ag-聚4-乙烯基吡啶杂化微凝胶

无机-聚合物纳米复合材料是将聚合物与一种或多种无机纳米粒子复合而成的一种材料,它同时具有无机纳米粒子和聚合物的优良特性,在许多重要技术领域具有广泛的应用前景.近20年来,无机-聚合物纳米复合材料的制备及应用备受关注[1~6].包括杂化微凝胶在内的纳米复合微球是无机-聚合     

聚丙烯/无机纳米粒子复合材料的发泡行为

利用型腔体积可控注塑发泡装备制备聚丙烯/无机纳米粒子微发泡复合材料,通过复合材料的流变行为和结晶行为,分析了无机纳米粒子对聚丙烯发泡行为的影响。结果表明:无机纳米粒子有促进气泡异相成核作用,同时无机纳米粒子引入可以提高聚丙烯黏弹响应和降温结晶起始温度,起到了抑制泡孔结构恶化的作用,显著改善了聚丙烯的泡孔结构;在聚丙烯材料中添加纳米CaCO3、纳米OMMT、纳米SiO2进行发泡,以PP/OMMT发泡材料的发泡质量最理想,其泡孔密度和尺寸分别为2×106个/cm3和24.2μm。     

原子转移自由基聚合接枝改性纳米Si02的研究进展

纳米SiO2粒子极易团聚,在有机介质中难以均匀分散,从而大大地限制了其优异性能的发挥,有必要对其进行化学改性处理。原子转移自由基聚合（atom transfer radical polymerization,ATRP）是对纳米Si02粒子进行接枝改性的一种有效途径,通过ATRP对纳米SiOz粒子进行表面改性,可以制备集无机纳米粒子和聚合物的优点于一身的SiO2-聚合物复合材料,且接枝链的长度及分子量分布可控,拓展了纳米SiO。的应用领域。本文主要综述了ATRP、RATRP（reverse ATRP）、AGETATRP（activators generated by electron transfer ATRP）和ARGETATRP（activators regenerated by electron transferATRP）方法对纳米Si02接枝改性的研究现状。     

LLDPE/纳米SiO_2复合材料的力学性能和光学性能研究

采用熔融共混方法制备了LLDPE 纳米SiO2 复合材料 ,并对该体系的力学性能和光学性能进行了系统研究 .结果表明 ,随着纳米SiO2 的加入 ,复合材料的弹性模量显著提高 ,冲击强度与拉伸强度呈峰形变化 ,且均在SiO2 含量为 3phr左右达到最大值 .加入少量的纳米SiO2 后 ,复合材料薄膜对长波红外线 (7～ 1 1 μm)的吸收能力较LLDPE膜有了显著提高 ,透光率略有下降但雾度提高 ,透光质量得到改善 .同时表明 ,纳米SiO2 的表面处理方法对膜的光学性能有显著影响     

聚乳酸/纳米SiO_2复合材料的熔融和冷结晶行为

采用熔融共混法制备了聚乳酸(PLLA)/纳米SiO2复合材料;利用透射电镜观察了复合材料的微观形貌;利用差示扫描量热仪测定了该复合材料的熔融行为和非等温冷结晶行为;利用Jeziorny法和Mo法研究了PLLA及其复合材料的非等温冷结晶动力学.结果表明,纳米SiO2在PLLA基体中具有良好的分散性和异相成核作用,使得PLLA基体的结晶峰向低温方向移动;复合体系的熔融温度和熔融焓的变化与SiO2的加入量密切相关.采用Jeziorny法和Mo法均可以很好地处理复合材料的非等温冷结晶过程.     

Effects on the thermal expansion coefficient and dielectric properties of CLST/PTFE filled with modified glass fiber as microwave material

The CLST/PTFE/5%GF composite sharply decreases the CTE in both X&Y and Z directions, obtained a promising microwave dielectric material for microwave communication.     

可分散性纳米SiO2/尼龙1010复合材料的结晶行为

采用熔融共混法制备了可分散性纳米SiO2/尼龙1010复合材料.通过X射线衍射和差示扫描量热法对尼龙1010及其复合材料的结晶行为进行了研究.结果表明,SiO2的加入作为结晶的异相成核点,使复合材料的结晶温度升高,熔融温度降低,使其结晶度稍有降低;SiO2的加入并没有改变尼龙1010的结晶形态,只是使尼龙1010的晶格尺寸发生了一定程度的改变.     

合成聚对苯二甲酸丙二醇酯负载型催化剂钛酸四丁酯/纳米二氧化硅的制备

以钛酸酯偶联剂(TMC-201)为改性剂,采用超声波分散方法对亲水性纳米二氧化硅(nano-SiO2)进行了表面改性。采用浸渍法将钛酯四丁酯(Ti(OC4H9)4)负载于表面改性的nano-SiO2上,制备了纳米级Ti(OC4H9)4/nano-SiO2负载型催化剂。考察了偶联剂用量、温度、时间对纳米SiO2表面改性的影响,研究了负载时间、负载温度和Ti(OC4H9)4用量对表面改性后纳米SiO2负载Ti(OC4H9)4的影响。结果表明,当TMC-201质量分数为35%、反应温度为90℃、反应时间为3.5 h时,纳米SiO2粒子表面接枝的偶联剂量最大;在室温下,负载48 h,Ti(OC4H9)4用量为表面改性纳米SiO2量的1/2时得到的Ti(OC4H9)4/nano-SiO2负载型催化剂负载Ti(OC4H9)4量最大;运用ICP-AES、FESEM等测试技术对修饰后的纳米SiO2及Ti(OC4H9)4/nano-SiO2负载型催化剂进行了表征;将Ti(OC4H9)4/nano-SiO2负载型催化剂用于聚对苯二甲酸丙二醇酯(PTT)聚酯合成的结果表明,与均相Ti(OC4H9)4催化剂相比,Ti(OC4H9)4/nano-SiO2负载型催化剂催化合成PTT聚酯过程中酯化时间177 min,与均相催化剂催化酯化时间相近,在缩聚2 h后得到PTT的特性粘度高达1.05,证明该负载型催化剂具有高的催化活性,既可催化酯化反应又可催化缩聚反应。     

固体高分辨核磁共振研究聚氧乙烯/纳米二氧化硅复合物的界面相互作用

采用固体高分辨核磁共振碳谱对聚氧乙烯(PEO)/纳米二氧化硅(Nano-SiO₂)复合物体系的相态结构、分子间相互作用和分子运动进行了研究,发现随着复合物中SiO₂含量增加,PEO结晶度明显降低,且PEO非晶区的分子运动受到明显约束,基于对PEO非晶区及SiO₂颗粒表面羟基质子的自旋-自旋弛豫行为的分析,提出了复合物的界面模型以及SiO₂与PEO之间的界面相互作用机制.     

Effect of surface treatment of UHMWPE fiber on mechanical and impact fracture behavior of PTFE/POM composites

Ultra‐high‐molecular‐weight polyethylene (UHMWPE) fiber was treated to reinforce the polytetrafluoroethylene/polyoxymethylene (PTFE/POM), and the mechanical properties of surface‐treated UHMWPE were investigated. Scanning electron microscopy was utilized to study the fracture surfaces of UHMWPE/POM/PTFE composites. Experimental results showed that the surface treatment of UHMWPE fiber effectively improves the mechanical property of POM/PTFE composites. Scanning electron microscopy studies indicated that surface modification could improve the interfacial adhesion of POM/PTFE composites. And the dispersion of UHMWPE in POM/PTFE composites was also improved after the surface modification. Copyright © 2017 John Wiley & Sons, Ltd.     

Novel preparation of glass fiber reinforced polytetrafluoroethylene composites for application as structural materials

A novel method was developed to fabricate continuous glass fiber reinforced polytetrafluoroethylene (PTFE/GF) composites which includes the use of conventional sintering and vacuum assisted resin transfer molding (VARTM), successively. The RTM resin (coded as M4506‐1) “fills” the porosity and defects of original PTFE/GF composites prepared by traditional sintering processing, improves the overall interface bonding between the matrix and fibers, and thus significantly improves the mechanical properties such as the flexural and interlaminar shear strength of fiber reinforced PTFE composites. The present work suggests a new way to produce fiber (especially continuous fiber) reinforced PTFE composites with high mechanical properties, and thus make it potentially possible to use PTFE‐based composites as structural materials. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and Thermal Characterization of PTFE/PES Nanocomposites

Summary: PTFE/PES composites were prepared by precipitation of Radel A® into a PTFE latex containing nanoparticles with average diameters of 48 nm and spherical shape. Several samples were prepared by varying the relative ratio between the Radel A® and PTFE content. The combination of SEM and AFM analysis indicates that the precipitation of Radel A in the presence of PTFE leads mainly, if not exclusively, to a bimodal mixture of the two homoparticles. The fractionated crystallization behaviour of these samples is revealing of the PTFE dispersion degree within the Radel A® matrix. When the PTFE amount is lower than 2%, a perfect PTFE nanoparticle dispersion is obtained. When the amount of PTFE is comprised between 5 and 30%, larger PTFE clusters are obtained that, after melting, coalesce and crystallize at higher temperatures depending on the crystallization propensity of their individual heterogeneous nuclei. Finally, in case of samples 40%, only one crystallization exotherm is observed at 310 °C indicating the formation of very large clusters that after melting coalesce into wide domains.     

Research on high temperature friction properties of PTFE/Fluorosilicone rubber/silicone rubber

Silicone rubber (MVQ) has excellent heat resistance, but poor high temperature friction stability, which limits its application in the field of high temperature sealing. Polytetrafluoroethylene (PTFE) is self-lubricating, but its compatibility with rubber is relatively weak. In order to improve the high-temperature friction property of silicone rubber, fluorosilicone rubber (FVMQ) was used as a compatibilizer, and PTFE was added to MVQ by mechanical blending. The friction and wear properties of PTFE/FVMQ/MVQ composites at different temperatures were studied. The results show that compared with MVQ, the mechanical properties of PTFE/FVMQ/MVQ composites was basically unchanged, the coefficient of friction was hardly affected by temperature, and the amount of wear decreased with increasing temperature. PTFE/FVMQ/MVQ composites showed excellent high-temperature abrasion resistance. The high-temperature wear mode was mainly changed from abrasive wear to adhesive wear. The molten layer formed by high-temperature friction can prevent air from directly contacting the surface rubber, which inhibited rubber surface oxidation reaction process.