共查询到20条相似文献,搜索用时 406 毫秒
1.
2.
本文综述了国内外有关利用环氧树脂改性热塑性树脂共混体系研究的最新进展。着重阐述了环氧树脂在热塑性树脂之间的增容作用,如尼龙6(PA6)合金体系,改性聚苯乙烯塑料(ABS)合金体系,以及聚对苯二甲酸丙二醇酯(PTT)合金体系等。同时,介绍了利用环氧树脂的反应活性提高无机填料在聚合物中分散性研究的情况,如二氧化硅纳米粒子在聚醚砜(PES)中,以及滑石粉在聚丙烯(PP)中分散性的提高。最后,简介了环氧树脂改性热塑性树脂提高热塑性树脂物理机械性能方面的研究方向和成果并展望了环氧树脂在热塑性树脂改性研究中的前景。 相似文献
3.
4.
5.
6.
7.
提出了一种用弹性纳米粒子改性环氧树脂的新方法. 试验结果表明, 用平均粒径为90 nm的羧基丁腈弹性纳米粒子和平均粒径为100 nm的丁苯吡弹性纳米粒子改性热固性环氧树脂, 均比用传统的液体端羧基丁腈橡胶具有更好的增韧效果, 并且, 改性后环氧树脂的耐热温度和玻璃化温度不但不降低, 反而有所提高. 文中通过对弹性纳米粒子改性环氧树脂的微观结构和界面性能的研究, 发现反应性较强的丁苯吡弹性纳米粒子对环氧树脂的改性效果明显优于羧基丁腈弹性纳米粒子, 提出了在二相界面大量增加的氢键和化学反应是改性环氧树脂韧性和耐热温度提高的主要原因. 相似文献
8.
无机纳米粒子的引入可以使聚合物材料获得抗菌、导电和防紫外等诸多特性,但无机纳米粒子在聚合物基质中易团聚、引入量少,难以充分发挥其优点。细乳液聚合法基于其独特的成核方式--液滴成核,能够提高无机纳米粒子在聚合物基中的分散性和引入量,且复合材料的形貌易于控制,是目前制备特殊形貌有机/无机纳米复合材料的一种有效手段。本文介绍了有机/无机复合纳米材料的细乳液制备过程,综述了近年来不同无机纳米粒子与有机基质复合的研究进展,例如:纳米SiO2、纳米ZnO、金属纳米粒子、纳米氧化石墨烯等。最后就其发展现状提出了几点建议。 相似文献
9.
纳米SiO2粒子极易团聚,在有机介质中难以均匀分散,从而大大地限制了其优异性能的发挥,有必要对其进行化学改性处理。原子转移自由基聚合(atom transfer radical polymerization,ATRP)是对纳米Si02粒子进行接枝改性的一种有效途径,通过ATRP对纳米SiOz粒子进行表面改性,可以制备集无机纳米粒子和聚合物的优点于一身的SiO2-聚合物复合材料,且接枝链的长度及分子量分布可控,拓展了纳米SiO。的应用领域。本文主要综述了ATRP、RATRP(reverse ATRP)、AGETATRP(activators generated by electron transfer ATRP)和ARGETATRP(activators regenerated by electron transferATRP)方法对纳米Si02接枝改性的研究现状。 相似文献
10.
11.
Comprehensive high-performance epoxy nanocomposites were prepared by simultaneous incorporating montmorillonite (MMT) and nanoSiO2 into epoxy. Mechanical tests and thermal analyses showed that the epoxy/MMT/nanoSiO2 nanocomposites obtained considerable improvement over basic epoxy in tensile modulus, tensile strength, flexural modulus, flexural strength, notch impact strength, glass transition temperature, and thermal decomposition temperature. X-ray diffraction measurements and transmission electronic microscopy observations revealed that the layered structure of MMT was completely exfoliated into two-dimensional nanoscale mono-platelets. These 2D mono-platelets formed intermingled structure with the zero-dimensional nanoSiO2 spheres in the nanocomposites. This study suggests that employing the synergistic reinforcement effect of two dimensionally different nanoscale particles is one pathway to success in developing comprehensive high-performance polymer nanocomposites. 相似文献
12.
13.
A. I. Barabanova P. L. Shevnin T. A. Pryakhina K. A. Bychko V. V. Kazantseva B. G. Zavin Ya. S. Vygodskii A. A. Askadskii O. E. Philippova A. R. Khokhlov 《Polymer Science Series A》2008,50(7):808-819
The cure of an epoxy resin (3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate) in the presence of silica nanoparticles modified by 3-(triethoxysilyl)propylsuccinic anhydride has been studied. Optimal conditions for the preparation of optically transparent polymer nanocomposites with increased glass transition temperatures are determined. The glass transition temperatures of the above nanocomposites are 50–70°C higher than those of the unfilled epoxy resin synthesized under the same conditions (100°C). 相似文献
14.
P. Tabero 《Journal of Thermal Analysis and Calorimetry》2013,111(1):247-252
Thermal properties of the organic–inorganic bicontinuous nanocomposites prepared via in situ two-stage polymerization of various silanes, epoxy, and amine monomers are investigated, and the impact of filler content and its organic compatibility on thermal stability of these nanocomposites is studied. Two series of epoxy–silica nanocomposites, namely, EpSi-A and EpSi-B containing 0–20 wt% silica, are synthesized. An epoxy–silane coupling agent is employed to improve the organic compatibility of silica in EpSi–B nanocomposites. The composites synthesized via two-stage polymerization are characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric (TG) analysis. DSC and TG/differential thermogravimetric results reveal substantially high glass transition (T g) and excellent thermal stability of the bicontinuous nanocomposites as compared with pristine epoxy polymer. Both T g and thermal properties, however, considerably vary depending on the organic compatibility of the nanocomposites. Significantly higher decomposition temperatures are recorded in case of EpSi-B nanocomposites owing to the chemical links between the epoxy and silica phases. Kinetic studies also show relatively higher activation energies of pyrolysis for EpSi-B nanocomposites. 相似文献
15.
Organoclay-modified hydroxylterminated polysulfone (PSF)/epoxy interpenetrating network nanocomposites (oM-PSF/EP nanocomposites) were prepared by adding organophilic montmorillonite (oMMT) to interpenetrating polymer networks (IPNs) of polysulfone and epoxy resin (PSF/EP) using diaminodiphenylmethane (DDM) as curing agent.The mechanical properties like tensile strength,tensile modulus,flexural strength,flexural modulus and impact properties of the nanocomposites were studied as per ASTM standards.Differ... 相似文献
16.
Novel epoxy nanocomposites based on a diglycidyl ether of bisphenol A (DGEBA) epoxy, an epoxy functionalized hyperbranched polymer (HTTE) and nano‐Al2O3 were synthesized with the aim of determining the effect of the nano‐Al2O3 particles and HTTE on the structure and properties of epoxy nanocomposites. The mechanical properties, thermal conductivity, bulk resistivity, and thermal stability of the nano‐Al2O3/HTTE/DGEBA ternary composites were evaluated and compared with the corresponding matrix. The improvement in impact properties of these nanocomposites was explained in terms of fracture surface analysis by SEM. The results indicate that the incorporation of nanoparticles and hyperbranched epoxy effectively improved the toughness of epoxy composites without sacrificing thermal conductivity and bulk resistivity compared to the neat epoxy and Al2O3/DGEBA, obtaining a well dispersion of nanoparticles in epoxy matrix and solving the drawbacks for single fillers filled epoxy nanocomposite. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
17.
Chin-Lung Chiang Chen-Chi M. Ma Feng-Yih Wang Hsu-Chiang Kuan 《European Polymer Journal》2003,39(4):825-830
Modified epoxy nanocomposites containing silicon and phosphorous was prepared and compared with pure epoxy. The study of thermo-oxidative degradation of modified epoxy nanocomposites and pure epoxy has been utilized by thermal analysis. The thermal stability of modified epoxy nanocomposites is not superior to that of the pure epoxy at low temperature, however, the char yield of modified epoxy nanocomposites is higher than that of the pure epoxy at 800 °C in air atmosphere. The modified epoxy nanocomposites possess better thermal stability at high temperature range. The values of the limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively. This indicates that modified epoxy nanocomposites possesses better flame retardance.By the Kissinger’s method, the activation energies of thermo-oxidative degradation for epoxy nanocomposites are less than those of thermo-oxidative degradation for pure epoxy in first stage of thermo-oxidative degradation. However, the activation energies of thermo-oxidative degradation for epoxy nanocomposites are more than those of thermo-oxidative degradation for pure epoxy in second stage of thermo-oxidative degradation. 相似文献
18.
Organoclay nanocomposites were prepared by ultrasound‐assisted solution intercalation technique based on polystyrene containing brominated epoxy and a combination of brominated epoxy and antimony oxide. Aspects of nanomorphology and nanodispersion were investigated by X‐ray diffraction and transmission electron microscopy whereas flammability and reaction to fire were evaluated using limiting oxygen index, UL‐94, and mass loss calorimeter tests. Polystyrene/brominated‐epoxy‐blend‐based nanocomposites showed mixed intercalated–exfoliated nanomorphology where polymer‐intercalated crystallites predominantly exist in polystyrene matrix and exfoliated silicate layers reside on polystyrene/brominated epoxy phase boundaries and within brominated epoxy domains. Organoclay was found to impart a compatibilization effect on polystyrene and dispersed brominated epoxy, which facilitates uniform distribution of a fine flame‐retarding phase within the matrix. With the reduction of the rate at which decomposition products evolve into the gas phase, organoclay nanocomposites showed notable reductions in peak heat release rate and increases in limiting oxygen index. The gas‐phase hot radical entrapment by halogenated flame‐retardant system was coupled with the condensed‐phase physical action of nanodispersed organoclay, which increased the overall fire‐retardant effectiveness. Fire‐retardant mechanisms of nanocomposites based on polystyrene/brominated epoxy blends were attributed to nanoconfinement and tortuous pathway effects of organoclay rather than to carbonaceous char formation proposed earlier for polystyrene/organoclay systems without conventional flame retardants. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
19.
Using a unidirectional heat transfer apparatus, the roles of nanoparticle geometry, loading, dispersion and temperature on the thermal conductivity of polymer nanocomposites are investigated. The polymer nanocomposites (PNC) consist of epoxy matrices filled with silica nanopowder and carbon nanotubes, respectively, as well as poly (2-vinylpyridine) (P2VP) matrices loaded with silica nanoparticles. First, it is shown that thermal conductivity generally increases with nanofiller loading. These results are also reasonably described by the three phase Lewis-Nielsen or Halpin-Tsai analytical models. More importantly, it has been also demonstrated that the thermal conductivity of the polymer nanocomposites greatly depends on the dispersion state of the nanofillers. Furthermore, the effect of temperature on the thermal behavior of PNCs is briefly discussed. These results emphasize the important role of nanoparticles content and dispersion state on the thermal characteristics of polymer nanocomposites, which can be used to design composite materials with tunable thermal behavior. 相似文献
20.
Drummy LF Koerner H Farmer K Tan A Farmer BL Vaia RA 《The journal of physical chemistry. B》2005,109(38):17868-17878
With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale. 相似文献