丁二烯气相聚合的负载型稀土催化剂研究

合成了负载型稀土催化剂,并将其用于丁二烯气相聚合.研究表明,硅胶负载Nd(naph)₃-Al(i-Bu)₃-Al(i-Bu)₂Cl催化体系具有相当高的催化活性和立体定向性,其最佳组成:n(Al)/n(Nd)=40～60,n(Cl)/n(Nd)=3～7.添加适量单体丁二烯或异戊二烯,尤其是添加丁二烯,可成倍提高催化活性,随着聚合反应的进行,其速率在10min内迅速增加并达到峰值,随后降低,动力学行为属衰减型.所得聚丁二烯的分子量在几十万至百万,凝胶含量小于6%,顺-1,4结构含量达到98%左右.     

杯芳烃钕配合物均相体系催化丁二烯聚合

应用新型配体杯芳烃钕配合物与三异丁基铝以及添加Al(i-Bu)₂Cl为第三组分构成二元、三元均相催化体系催化丁二烯聚合.研究结果表明,对于杯[6,8]芳烃钕(C[n]Nd_xCl_y)/Al(i-Bu)₃/汽油体系,当n(Al)/n(Nd)=40～100,50℃时具有中等催化聚合活性,所制得聚丁二烯的粘均分子量为1×10⁵～2×10⁵,顺-1,4结构含量为89%左右,添加适量Al(i-Bu)₂Cl能提高催化活性.杯芳烃钕(C[n]Nd)构成的三元体系在n(Al)/n(Nd)=30,n(Cl)/n(Nd)=1～3时不同杯芳烃的活性次序为:C6>C4>C8     

不同结构烷基铝催化异戊二烯齐聚与聚合行为研究

烷基铝（AlR₃）作为Ziegler-Natta催化剂体系的助催化剂组分,起到烷基化、还原主金属化合物、参与活性中心形成与演变、链转移剂等重要作用.然而烷基铝自身对二烯烃单体也具有催化作用.本工作采用不同结构烷基铝如三乙基铝（AlEt₃）、三异丁基铝（Al（i-Bu）₃）、氢化二异丁基铝（AlH（i-Bu）₂）、一氯二乙基铝（AlEt₂Cl）、二氯一乙基铝（AlEtCl₂）,研究了烷基铝的种类和浓度对异戊二烯催化行为的影响.采用核磁共振氢谱（¹H NMR）、凝胶渗透色谱（GPC）、气相色谱-质谱联用（GC-MS）等对产物的微观结构（顺式-1,4-和反式-1,4-含量）和分子量及分布等进行了表征,探讨了不同结构烷基铝的催化行为.发现烷基铝不仅可以催化异戊二烯齐聚,与微量水作用后还可以引发异戊二烯阳离子聚合,得到顺反混合结构的线性聚合物.烷基铝浓度对其催化行为有较大影响.当n（Al）/n（M）=1050×10^-5时,AlEtCl₂的催化活性显著提高,产物主要为线性聚合物;而其他结构烷基铝的催化活性较低.当n（Al）/n（M）≤350×10^-5,烷基铝自身催化异戊二烯齐聚及聚合能力极弱.过低和过高的烷基铝浓度都不利于获得高分子量聚合物.这为深入理解Ziegler-Natta催化剂体系烷基铝组分的催化作用及其对聚合物的影响提供依据.     

稀土催化丁二烯-二烯共聚合过程中的原位环化反应

采用 Nd( naph) 3- Al( C2 H5) 3- ( t- C4 H9) Cl三组分稀土催化剂进行丁二烯 ( BD) -异戊二烯( IP)的顺式共聚合 ,在聚合过程中引入有机氯代烃 ( RCl) ,以与聚合液中的烷基铝作用生成阳离子活性种 ,引发已生成的共聚物的环化反应及单体的环聚反应 ,得到可溶性无凝胶且含有环聚成分的环化共聚合产物 .考察了 RCl用量、单体组成、稀土催化剂用量、反应温度等对原位环化反应的影响 .以红外光谱、核磁共振光谱对环化产物的结构进行了初步分析 ,确认了环化产物的生成     

氯化钕异丙醇合物/三异丁基铝催化剂活性中心的分离与聚合

研究了氯化钕异丙醇合物/三异丁基铝催化剂的配制方式对异戊二烯聚合和聚合产物特性的影响。 将催化剂的悬浊液分离得到清液和沉淀，分别进行聚合，并对沉淀进行了拉曼光谱表征。 结果表明，(Nd+Al)配制方式在室温和70 ℃下所得催化剂的清液均无活性，并且70 ℃下所得催化剂的沉淀也无活性。 (Nd+IP+Al)配制方式在任何条件下所得催化剂的各组分均有活性，推测该配制方式所得催化剂可能形成的是2种活性中心：(isoprenyl)2NdCl和(isoprenyl)NdCl2。 配制方式对聚异戊二烯的微观结构没有影响(96%左右)，分离前的悬浮催化剂和沉淀催化剂所得聚异戊二烯均为高分子量(Mn＞100×104)和窄分子量分布(Mw/Mn＜2.0)的聚合物，但是分离后清液所得聚合物的分子量较低(Mn＜30×104)，分子量分布很宽(Mw/Mn＞5.0)。     

多核钕-铝双金属配合物催化丁二烯聚合V.甲基铝氧烷的影响

以外添加的方式,考查了甲基铝氧烷(MAO)对多核钕-铝双金属配合物催化了二烯聚合的影响,并与烷基铝存在下的作用结果相比较.结果表明,MAO用量较低时(n(Al)/n(Nd)在5～20之间),即可较烷基铝更大程度提高稀土配合物的催化活性,获得顺式聚了二烯;MAO的链转移作用较烷基铝的低.     

异丙氧基钕系催化剂合成窄分布聚异戊二烯

采用异丙氧基钕/二异丁基氢化铝/含氯化合物（Nd(OiPr)3/Al(iBu)2H/RCl）催化体系,催化异戊二烯（IP）聚合。 考察了氯源和陈化温度对聚合的影响,并通过IR、NMR和GPC等技术手段对聚合物的微观结构、相对分子质量及相对分子质量分布等进行了表征。 结果表明,氯源种类对聚异戊二烯的相对分子质量分布影响较大。 采用Nd(OiPr)3/Al(iBu)2H/Me2SiCl2催化体系可制得窄分布(MWD＜1.5)的聚异戊二烯;该体系催化异戊二烯聚合过程中,陈化温度对聚异戊二烯的MWD影响较大,在0~50 ℃陈化时,MWD可保持在1.5以下,陈化温度的进一步升高,MWD则变得很宽;同时,随陈化温度升高,聚合收率不断增加,聚合物1,4-结构含量稍有增加。     

A highly active neodymium chloride isopropanol complex/modified methylaluminoxane catalyst for preparing polyisoprene with high cis-1,4 stereospecificity and narrow molecular weight distribution

<正>Neodymium chloride isopropanol complex(NdCl_3·3~iPrOH) activated by modified methylaluminoxane(MMAO) was examined in isoprene polymerization in hexane,with regards to Nd compounds,aluminum(Al) compounds,[Al]/[Nd] ratio,polymerization temperature and time.NdCl_3-3~iPrOH exhibited high activity producing polymers featuring high cis-1,4 stereospecificity(96%),very high molecular weight(M_n1.0×10~6) and fairly narrow molecular weight distribution (MWD,M_w/M_n2.0) simultaneously.In comparison,neodymium isopropoxide also showed high activity providing polymers with narrow MWD(M_w/M_n = 2.07),but somewhat low cis-1,4 content(ca.92%),while neodymium chloride had no activity under present polymerization conditions.The Al compounds affected the polymer yield in the order of Al(i-Bu)_3MMAOAl(i-Bu)_2H.MMAO as cocatalyst afforded polyisoprene with high M_n over 1.0×10~6,whereas as stronger chain transfer agent than MMAO,Al(i-Bu)_3 and Al(i-Bu)_2H yielded polymers with low M_n(1.0×10~5-8.0×10~5). NdCl_3·3~iPrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low[Al]/[Nd]ratio of 30,and the produced polymer remained high cis-1,4 content of 95.8%along with high M_n over 1.0×10~6 even at elevated temperatures up to 70℃.The polymerization rate is of the first order with respect to the concentration of isoprene.The mechanism of active species formation was discussed preliminarily.     

稀土-其它过渡金属混合催化剂用于共轭双烯烃的聚合——Ⅳ.(NdCl_3+FeCl_3)·nphen-HAI(i-Bu)_2体系对异戊二烯的聚合

本文报道由(NdCl_3+FeCl_3)·nphen-HAl(i-Bu)_2催化体系引发异戊二烯聚合的结果。在适当Nd/Pe比下,该体系对异戊二烯聚合的活性可超过单一钕或铁催化剂的活性,同时随催化剂中钕和铁含量的不同,所得产物的微观结构变化很大,当体系中钕含量由100％→0时,产物的顺-1,4结构含量由94.4％→22.1％,而3,4结构含量由5.6％→77.9％。Al/M(N=Nd+Fe)比、单体浓度和聚合温度不仅对聚合活性有影响,对产物的微观结构影响也较大。事实表明,该聚合体系中存在着两种过渡金属(Nd和Fe)活性中心,它们按各自的机理进行异戊二烯的聚合。     

铝盐配位分离氟碳铈矿酸浸液中氟和铈

氟碳铈矿是最主要的稀土来源,而氟是制约稀土清洁化分离的瓶颈,因此在提取稀土前进行氟的分离是一种解决方案。利用氟铝间很强的配位性质,加入铝盐而发生竞争配位反应,使[CeF2]2+变为游离Ce4+后向萃取相转移,实现氟-铈分离。实验结果表明:[H+]≤1.0mol.L-1,以Al2(SO4)3或NaAlO2为氟络合剂,根据酸浸中F-含量,向浸出液中加入n(F)/n(Al)=1的Al2(SO4)3或n(F)/n(Al)=1.5的NaAlO2时,氟-铈分离效果最好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.