微米级PS-PEDOT核壳型导电微球的合成与拉曼表征

以分散聚合法制备的微米级聚苯乙烯(PS)微球为模板、3,4-乙烯二氧噻吩(EDOT)为单体、过硫酸铵(APS)为引发剂,通过氧化聚合制备了PS-PEDOT核壳型复合导电微球。采用扫描电镜、透射电镜等对导电微球的形貌和结构进行了表征,重点采用拉曼光谱研究了其核壳结构特征。并研究了超声分散、溶液pH以及单体配比对导电微球形貌的影响。实验结果表明:超声的引入可提高导电微球的单分散性,改善微球的形貌。随着pH的降低或单体配比的增加,导电聚合物在PS微球表面的负载量随之增加,当m(EDOT)/m(PS)由0.60增加到1.25时,导电微球的平均粒径由1.76μm增加到1.91μm。     

聚苯乙烯单分散微球粒径可控性探讨

在系统研究分散聚合反应中的原料组成(分散稳定剂、单体、引发剂)和反应条件(反应介质极性、反应体系温度、搅拌速度)对所制备的聚合物微球的粒径大小及粒径分布和聚合反应速率影响的基础上,根据各因素的影响效应,优化设计分散聚合的反应条件,成功地制备出1μm~10μm粒径范围内不同粒径级别的微米级单分散聚合物微球,实现了不同粒径大小及粒径分布的微米级单分散聚合物微球制备的控制设计。     

含C60聚苯乙烯微球的制备及光电导性能研究

目前,多功能、高性能聚合物微球的合成及应用已成为研究热点.制备聚合物微球的方法有乳液聚合法、分散聚合法、无皂乳液聚合法、超微乳液聚合法和悬浮聚合法等.制备微米级微球通常采用乳液聚合法和分散聚合法.     

蒸馏沉淀聚合法制备窄分散聚二乙烯基苯-co-丙烯腈功能聚合物微球

采用蒸馏沉淀聚合法,利用过氧化苯甲酰(BPO)为引发剂,在不加任何稳定剂和不搅拌的情况下,丙烯腈(AN)和二乙烯基苯(DVB)为共聚单体制备了不同交联度的微米和亚微米窄分散聚合物微球,考查了共聚单体对球体的影响,并用扫描电镜(SEM)和红外光谱对微球进行了表征.     

交联聚苯乙烯单分散微球的制备

微米级粒度均匀的聚合物微球作为功能高分子材料在分析化学、生物化学、标准计量以及某些高新技术领域中应用广泛。制备聚合物微球的传统方法有乳液和悬浮聚合法。乳液聚合只能制备粒径为0．1-0．7μm的颗粒，采用无皂或低皂乳液聚合法制成的单分散聚合物微球粒径接近1μm，但难于达到1μm以上，且后处理比较麻烦；悬浮聚合制备的聚合物微球粒径则一般在100-1000μm之间，且是多分散性的。而分散聚合获得的微球呈单分散性，是制备粒径为1-10μm的单分散聚合物微球的有效方法。     

在超临界二氧化碳中制备超高分子量聚乙烯多孔微球

以超高分子量聚乙烯作为原料, 在超临界二氧化碳中通过热处理成功制备了聚合物微米球. 微球尺寸符合高斯分布, 并可以控制在较窄范围内, 微球表面多孔且内部中空. 微球的形成是恒温过程和超临界二氧化碳双重作用的结果. 降温过程导致聚合物溶解度降低, 超高分子量聚乙烯分子链析出结晶而形成微球, 内部包裹了少量二氧化碳; 温度进一步降低导致微球内外压力不平衡, 二氧化碳从空心球内部释放形成表面孔洞. 恒温结晶过程除了促使微球结晶度进一步提高外, 还可以使亚稳晶型单斜晶转化为稳定的正交晶.     

有机颜料酞菁蓝微胶囊的原位微悬浮法制备及其表征

通过简单的超声分散及强力剪切将滤饼中的有机颜料颗粒以初级粒子形式均匀稳定地分散到单体分散液和微悬浮液中的单体小液滴内,经有机颜料单体分散液的预聚处理和原位微悬浮聚合制备得到一系列具有高颜料包裹率和窄粒径分布特点的微米级聚合物胶粒.实验观察和粒径分析DLS证明,预聚处理可明显提高微悬浮体系中单体液滴相的黏度,因而可有效改...     

吴氏作图法的实验证明

"吴氏作图法"为高分子微球的大小和单体与稳定剂之比之间的关系提供了有效的定量数据分析方法.其基本点是,对于表面活性剂、离子基团或聚合物链所稳定的高分子微球,每个稳定剂所占有的高分子微球表面积(S)为一常数.过去的大量实验已证明,"吴氏作图法"适合应用于高分子纳米粒子.本文根据最近的实验结果,发现"吴氏作图法"同样适用于微米级高分子微球.这为分散聚合中设计和控制高分子微球的尺寸提供了理论依据.     

乳液聚合法制备亚微米级分子印迹聚合物微球

以西咪替丁为印迹分子，2-丙烯酰胺-2-甲基丙磺酸(AMPS)为功能单体，三羟甲基丙烷三甲基丙烯酸甲酯(TRIM)为交联剂，采用乳液聚合法制备了亚微米级分子印迹聚合物微球．利用扫描电镜对此聚合物微球的形貌进行了观察，探讨了影响乳液稳定性、粒径大小与分布的主要因素，重点对聚合工艺和配方进行了优化，并将所得的聚合物用作吸附剂研究了其分子识别与选择性能．研究表明，乳液聚合法能够制得单分散性较好的、平均粒径在0．169μm～0．407μm的分子印迹聚合物微球，且该微球对其印迹分子呈现出较好的特异识别与选择性能，当以苯丙氨酸为竞争分子时，分离因子可达1．70．     

分散聚合法制备窄分布聚苯乙烯微球

窄分布聚合物微球有相当广泛的用途，如用于色谱柱填料，过滤器效能和孔径的测定标准，生化反应的载体等［１］．制备聚合物微球的方法有多种：如悬浮聚合物法可以制得微米级球体，但粒径分布较宽［２］；超微乳液聚合法，却仅能制得小于１μｍ的超微球［３］；唯有分散聚...     

种子溶胀悬浮聚合法制备分子印迹聚合物微球

 以酪氨酸为印迹分子 ,甲基丙烯酸为功能单体 ,三羟甲基丙烷三甲基丙烯酸酯 (TRIM )为交联剂 ,采用种子溶胀悬浮聚合法在水溶液中制备了一系列分子印迹聚合物微球 (MIPMs)。利用扫描电镜 (SEM)对此微球的粒径大小、粒径分布、表面孔与孔径分布等进行了分析研究 ,探讨了影响其形貌的主要因素 ,并将所得微球用作固定相研究了其分子选择吸附性能。研究表明 ,种子溶胀悬浮聚合法能够制得单分散性较好的、表面带有微孔的分子印迹聚合物微球 ,且该微球呈现出较好的特异吸附性能。     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

Preparation of narrow or monodisperse poly(ethyleneglycol dimethacrylate) microspheres by distillation-precipitation polymerization

Highly crosslinked narrow or monodisperse poly(ethyleneglycol dimethacryltae) (polyEGDMA) microspheres were prepared by distillation-precipitation polymerization in neat acetonitrile with 2,2′-azobis(2-methyl propinitrile) (AIBN) as an initiator. The polymer microspheres with clean surfaces due to the absence of any added stabilizer in the reaction system were formed simultaneously through a precipitation manner during the distillation of acetonitrile off the reaction system. The effects of the solvent, initiator concentration, monomer concentration and comonomer (divinylbenzene, DVB) fraction on the formation of the microspheres were investigated. Narrow- or monodisperse particles with spherical shape and smooth surface were obtained with diameters between 1.18 and 2.50 μm with monomer loading lower than 3.13 vol%. The surfaces of the microspheres became rougher, some elliptic particles and doublet or triplet appeared with the increase of monomer concentration (as high as 3.75 vol%). The yield of polymer microspheres was increased from 31% to 75% with the increase of EGDMA fraction from 0 to 100% when EGDMA was copolymerized with DVB. The resulting polymer microspheres were characterized with scanning electron microscope (SEM) and Fourier transform-IR spectra.     

Preparation of biodegradable polyesteramide microspheres

Biodegradable polyesteramide copolymer P(CL/AU) based on -caprolactone and 11-aminoundecanoic acid was synthesized by the melt polycondensation method. Polyesteramide (PEA) microspheres were prepared by a simple O/W emulsion solvent evaporation method. The effects of variations in preparation parameters (such as emulsifier concentration, polymer concentration, polymer solution adding rate, stirring rate, and whether vacuum was applied) were studied in detail. The obtained microsphere morphologies were observed using an optical microscope and via scanning electron microscopy (SEM). The particle size distribution was determined using a Malvern laser particle sizer. When the PEA microspheres were incubated in PBS saline, the particle size increased at first, and then decreased after a longer time period; the theory that this behavior was due to degradation of the microspheres was confirmed by SEM.     

Energy‐damping behaviors of poly(methyl acrylate‐co‐divinylbenzene) microspheres coated with a porous nickel–phosphorus layer

Hybrid microspheres of poly(methyl acrylate‐co‐divinylbenzene) (PMADVB) with a thin and porous nickel–phosphorus (Ni–P) alloy layer were prepared via suspension polymerization and electroless nickel plating. The characterization of pristine and nickel‐coated microspheres was carried out with a differential scanning calorimeter and a scanning electron spectroscope equipped with an energy‐dispersive system. The glass‐transition range of Ni–P‐coated PMADVB was broadened and extended in the higher temperature direction. This effect allowed the PMADVB network to embrace more diversified energy states of the segment motion, this being a desired feature for damping sound waves. The low‐frequency (100–1000‐Hz) sound absorption behavior of the microspheres was tested with a sound attenuation kit. Besides the testing of their low‐frequency damping performance, an investigation into the ultrasonic‐wave (～35 kHz) absorption feature of the microspheres was conducted through chemical means; that is, the attenuation to the ultrasonic wave with respect to the unprotective situation was assessed through the chemisorption extent of copper ions on a biomass adsorbent. The Ni–P deposition layer was found to augment the damping capacity of the polymer network. The alloy layer was determined to cause an expansion of the glass‐transition range of PMADVB and its wave‐scattering capability because this layer was made up of submicrometer metallic grains. In this work, the particulars of the metal–polymer interactions were associated with a core–shell structure. The metal outer layer was thought to create a spherical temperature field inside the PMADVB network, and concerted motions of the polymer segments resulted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2710–2723, 2004     

微米级单分散共聚物微球的制备

用分散聚合法制备了苯乙烯 甲基丙烯酸甲酯微米级单分散共聚物微球 ,粒径为 5 4 μm .将分散聚合体系与乳液聚合体系进行了比较 ,并对共聚物微球的形貌、粒径分布及共聚情况进行了表征研究 .     

Fe掺杂ZnO空心微球的制备与光催化性能

ZnO是一种重要的Ⅱ-Ⅵ族半导体材料,其能带宽度约为3.37eV,在光电子学、传感、光催化、发电等诸多领域都具有巨大的应用潜力。本文采用简单的离子交换和热蒸发法成功制备了Fe掺杂ZnO空心微球,并利用扫描电镜、透射电镜、X射线粉末衍射仪对其形貌、结构以及成分等进行了详细的表征。光吸收测试证明Fe元素掺杂能够扩展ZnO的光吸收波段,实现波长375~600nm的光波吸收。另外,光催化实验证明Fe掺杂ZnO空心微球能够有效地促进罗丹明B的降解,表明合成的Fe掺杂ZnO空心微球是一种优异的光催化剂。     

单分散高纯硅胶色谱柱填料的制备

在氨水和氨气催化下使单晶硅粉水解, 合成了单分散、高纯的纳米二氧化硅水溶胶; 再利用聚合诱导胶体凝聚法(PICA)制备单分散脲醛二氧化硅复合微球, 经过高温煅烧后得到球形硅胶色谱柱填料. 通过电感耦合等离子-质谱(ICP-MS)、电子显微镜和BET比表面积测试等手段对球形硅胶的纯度、粒径分布及比表面积进行了表征, 并通过色谱分离对硅胶填料的性能进行了评价. 实验结果表明, 该方法合成的色谱柱填料具有纯度高、粒径分布均匀、机械强度高及分离能力强等优点.     

The effect of formulation variables on the characteristics of insulin-loaded poly(lactic-co-glycolic acid) microspheres prepared by a single phase oil in oil solvent evaporation method

Biodegradable polymeric microspheres are ideal vehicles for controlled delivery applications of drugs, peptides and proteins. Amongst them, poly(lactic-co-glycolic acid) (PLGA) has generated enormous interest due to their favorable properties and also has been approved by FDA for drug delivery. Insulin-loaded PLGA microparticles were prepared by our developed single phase oil in oil (o/o) emulsion solvent evaporation technique. Insulin, a model protein, was successfully loaded into microparticles by changing experimental variables such as polymer molecular weight, polymer concentration, surfactant concentration and stirring speed in order to optimize process variables on drug encapsulation efficiency, release rates, size and size distribution. A 2⁴ full factorial design was employed to evaluate systematically the combined effect of variables on responses. Scanning electron microscope (SEM) confirmed spherical shapes, smooth surface morphology and microsphere structure without aggregation. FTIR and DSC results showed drug–polymer interaction. The encapsulation efficiency of insulin was mainly influenced by surfactant concentration. Moreover, polymer concentration and polymer molecular weight affected burst release of drug and size characteristics of microspheres, respectively. It was concluded that using PLGA with higher molecular weight, high surfactant and polymer concentrations led to a more appropriate encapsulation efficiency of insulin with low burst effect and desirable release pattern.     

Preparation and characterization of monodisperse CdS quantum dot‐polymer microspheres

A novel and effective method for the preparation of monodisperse CdS quantum dot‐polymer microspheres was proposed. The monodisperse hollow polymer microspheres were firstly swelled in chloroform. Then, the reaction precursor composed of CdO and sulfur, was impregnated into the hollow polymer microspheres. Subsequently, the CdS quantum dots were synthesized directly within the polymer microspheres by thermal decomposition. The morphology, structure, and fluorescence properties of CdS quantum dot‐polymer microspheres were studied by scanning electron microscope, transmission electron microscope, fluorescence microscope, and flow cytometry. The results indicate that the fluorescent CdS quantum dots are successfully synthesized in the monodisperse hollow polymer microspeheres, which provide very strong fluorescence intensity, and offer excellent photostability due to the compact structure of the polymer matrix. These CdS quantum dot‐polymer microspheres have potential applications in biotechnology and biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 751–755, 2010