硒钼钒杂多配合物的合成与表征

由钒原子取代杂多阴离子中的钼或钨原子后，形成的多元配合物具有与原来杂多配合物显著不同的催化性质，有关钼钒的同多阴离子，近年报道的有[V2Mo6O26]^6-、[V5Mo8O40]^7-、[V8Mo4O36]^8-等，而三元硒钼钒杂多分配物仅见于[Se2Mo2V6O28]^6-。本文合成了两种硒钼钒三元杂多配合物，并对其进行了表征。     

Lindqvist型[M6-nMonO19]p-阴离子（M=W,Nb,Ta）电子性质的密度泛函理论研究

采用密度泛函理论方法探讨了取代Mo原子对[W6-nMonO19]2-,[Nb6-nMonO19]p-和[Ta6-nMonO19]p-体系的M—Ot(M=W,Nb,Ta)键的活化作用.计算结果表明,随着取代Mo原子数的增多,[M6-nMonO19]2-(M=W,Nb,Ta)中M—Ot键的键能逐渐减小,因此Mo原子的引入使M—Ot键活化.在[W6-nMonO19]2-中,Mo—Ot键的键能小于W—Ot键的键能,因此,Mo—Ot键比W—Ot键易断裂,与实验结果一致.而在[Nb6-nMonO19]p-和[Ta6-nMonO19]p-体系中,Mo—Ot键的键能大于M—Ot(M=Nb,Ta)键的键能.Nb和Ta原子的端氧Ot的电荷大于Mo原子的端氧Ot的电荷,初步预测,当[Nb6-nMonO19]p-和[Ta6-nMonO19]p-与有机胺反应时,Nb—Ot和Ta—Ot键优先断裂,易与有机胺的氮原子成键.     

Keggin型有机硅取代的多金属氧酸盐衍生物[XW11O40（SiR）2]n-(X=CoIII,P;R=CH=CH2,OH)的合成和表征

以CoIIIW11和有机硅烷为原料,在pH=1,乙醇-水(体积比=2∶1)的混合溶剂中,首次合成了Keggin型有机硅取代的钨钴酸盐[CoIIIW11O40(SiR)2]5-(CoIIIW11(SiR)2,R=CH=CH2,OH).这里,乙醇作为共溶剂增加硅烷在溶液中的溶解度,使CoIIIW11在转化为饱和结构之前能够快速与硅烷相遇并反应.产物的组成和结构用IR,UV-Vis,NMR,TG-DTA,元素分析等技术进行了全面表征.结果显示,两个SiR基团进入了CoIIIW11的空位,并形成Si—O—Si桥,得到与先前报道的硅取代钨硅酸盐和钨磷酸盐相似的结构.还运用此条件成功合成了以往需要在固-液相转移条件下合成的[PW11O40(SiR)2]3-[PW11(SiR)2,R=CH=CH2,OH],进一步证明了此方法在合成有机硅取代的多金属氧酸盐方面的可行性和通用性.     

链状三核钼(钨)硫原子簇化合物[M3O2S8]^2^-的合成, 光谱和晶体结构

本文以[NH4]2MOnS4-n(M=Mo, w, n=0-2)为原料, 在酸性和中性条件下, 合成出九个新的三核不对称钼硫和钨硫原子簇状化合物L2[M3O2S8][L=(n-Bu)4N, Ph4P,PyC16H33, (CH3)3NC16H33, Et4N], 用元素分析, 红外光谱, 紫外光谱对簇合物进行了表征, 并测定了其中[(n-Bu)4N]2[Mo3O2S8]和[n-Bu)4N]2[W3O2S8]两个簇合物的晶体结构。本文又一次验证了钼(钨)硫成簇反应是分子内部电子转反应, 并提出了反应历程。     

单取代多金属氧酸盐有机亚胺衍生物(n-Bu4N)2[Mo6O18(≡NAr)](Ar=o-GH3OC6H4)的合成

采用N,N'-二环已基碳酰亚胺(DCC)脱水法,以(n-Bu4N)2[Mo6O19]DCC邻甲氧基苯胺=1.51.11.0的摩尔比,无水乙腈中加热回流12 h,通过丙酮/乙醇溶液重结晶两次,得到橘红色片状晶体.探讨了最佳反应条件DCC的量在1.0～1.1 mmol,反应时间12 h.通过元素分析,UV/Vis光谱和1H NMR谱的研究表明,该晶体是一种新的六钼酸盐的有机亚胺衍生物(n-Bu4N)2[Mo6O18(≡NAr)](Ar=o-CH3OC6H4).     

两种多钼酸盐原料的合成、表征及相互转化

为了对多酸化合物合成过程的反应机理研究提供更多的基础信息,同时扩充同多酸盐的结构指纹图谱。以合成多钼酸盐化合物的两种常见反应物TBA2[Mo6O19]与TBA4[α-Mo8O26]为研究对象,以Na2MoO4为基础原料合成两种化合物,用红外光谱(IR)对其固体结构进行了表征,用电喷雾质谱法(electrospray ionization mass Spectrometry,ESI-MS)对二者的溶液行为进行了研究。结果表明,TBA2[Mo6O19]在溶液中的存在形式为裸多阴离子,TBA4[α-Mo8O26]在溶液中主要以降解后形成的低核钼簇的形式存在,其中{Mo4}含量最高。对两种化合物相互转化关系的研究表明,TBA4[α-Mo8O26]溶液加酸可成功转化为TBA2[Mo6O19],温度对该转化过程无明显影响。TBA2[Mo6O19]溶液加碱未能成功实现其转化为TBA4[α-Mo8O26]的逆反应过程。对两种多钼酸盐的ESI-MS、IR表征,得到了两种化合物的结构指纹图谱。对两种多钼酸盐转化的研究为多酸化合物之间的相互转化补充了一条可行方案,为多酸化合物合成过程的反应机理研究提供了更丰富的基础信息。     

含混合价态钒的晶体[N(CH3)4]4[H5PMo5V9O42]·3.5H2O的合成与结构

含有钒和钼的化合物在催化、抗病毒药物、功能材料等领域具有广阔的应用前景 [1～ 4 ] .近年来 ,钒取代的杂多化合物或金属 -氧簇的合成与表征已引起人们的广泛关注 ,许多新的化合物已被合成 ,如含五价钒的化合物 K7[Mo8V5O4 0 ]· 8H2 O和 Na3[VMo12 O4 0 ]· 1 9H2 O[5,6 ] ,含有混合价态钒的簇阴离子[( V V Mo10 ) VO4 0 ]6 - 和 [Mo8V V4 O4 0 ]8- 的化合物 [7,8] ,含双帽 Keggin 结构的簇阴离子[PMo6 VMo6 O4 0 ( V O) 2 ]5- 和 [PMo8V 4 V 2 O4 2 ]5- 的化合物 [9,10 ] 等 ,但所报道的含混合价态钒的 V- Mo化合物中含…     

硫化态PtMo/γ-Al2O3催化剂活性位的低温CO-FTIR方法表征及噻吩HDS活性的研究

目前, 负载型钼(钨)基双组元过渡金属硫化物[Co(Ni)Mo(W)/γ-Al2O3]被广泛应用于石油馏分油的加氢脱硫(HDS)和加氢脱氮(HDN)反应过程[1～3]. 许多研究结果表明, 硫化态Co(Ni)Mo(W)/γ-Al2O3催化剂的活性相组元钴(镍)、钼(钨)及硫形成具有二维六方点阵结构的Co(Ni)-Mo(W)-S相(slab). 其中钴(镍)和钼(钨)的主要催化功能依次是活化H2和锚定杂原子有机底物[3～5].     

同时含α-[Mo8O26]4-和β-[Mo8O26]4-的新型超分子化合物的合成、表征及其抗肿瘤活性

以(NH4)2[Mo4O13]·2H2O, NiCl2·6H2O和2-(1H-吡唑-3-基)吡啶为原料, 通过水热方法合成了一个新颖的[Ni(C8N3H7)3]4[Mo8O26]2·7H2O超分子化合物. 采用元素分析、红外光谱和单晶X射线衍射法表征了该无机-有机杂化配合物的结构. 晶体解析表明, 该化合物同时含有α-[Mo8O26]4-和β-[Mo8O26]4-, 在[Ni(C8N3H7)3]2+阳离子和[Mo8O26]4-阴离子之间通过氢键作用结合, 在[Ni(C8N3H7)3]2+阳离子之间通过芳香环的π-π堆积作用连接, 两种[Mo8O26]4-阴离子作为客体共存于一个具有三维蜂窝状的超分子结构中. 同时研究了该化合物对人卵巢癌细胞SK-OV-3、肺癌细胞A549、宫颈癌细胞Hela和乳腺癌细胞MCF-7等细胞的体外抗肿瘤活性. 结果表明, 该化合物对3种不同来源的肿瘤细胞均有一定的增殖抑制作用, 其中对MCF-7细胞的IC50值为6.48 μmol/L, 具有进一步研究的价值.     

钯、铱单取代十二钼磷酸盐的制备及性质的研究

本文报道了Pd 、Ir 　取代的十二钼磷酸四丁基铵盐 (α (n Bu4 N) 5[PMo11Pd(OH2 )O39]、α (n Bu4 N) 3[PMo11Ir(OH2 )O39])的制备方法。IR、UV及31P NMR证实产物仍保持Keggin结构 ,并有一个Mo 为Pd 、Ir 所取代。电化学上 ,Ir 取代化合物存在三个清晰的多酸骨架氧化 还原峰而Pd 取代化合物由于电极吸附作用使它的氧化 还原峰无法被观察到。在两个取代化合物的烯烃催化氧化中醇、酮为主要产物。　值得注意的是 ,Pd 取代化合物催化的反应中苯酚取代环己烯酮而成为主要产物     

A family of oxo-chalcogenide molybdenum and tungsten complexes, (n-Bu4N)2[M2O2(mu-Q)2(1,3-dithiole-2-thione-4,5-dithiolate)2] (M = Mo, W; Q = S, Se): new synthetic entries, structure, and gas-phase behavior

A new series of complexes with the general formula (n-Bu4N)2[M2O2(micro-Q)2(dmit)2] (where M = Mo, W; Q = S, Se; dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been prepared. Fragmentation of the trinuclear cluster (n-Bu4N)2[Mo3(micro3-S)(micro-S2)3(dmit)3] in the presence of triphenylphosphine (PPh3) gives the dinuclear compound (n-Bu4N)2[Mo2O2(micro-S)2(dmit)2] [(n-Bu4N)2[2]], which is formed via oxidation in air from the intermediate (n-Bu4N)2[Mo3(micro3-S)(micro-S)3(dmit)3] [(n-Bu4N)2[1]] complex. Ligand substitution of the molybdenum sulfur bridged [Mo2O2(micro-S)2(dimethylformamide)6]2+ dimer with the sodium salt of the dmit dithiolate also affords the dianionic compound (n-Bu4N)2[2]. The whole series, (n-Bu4N)2[Mo2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[3]], (n-Bu4N)2[W2O2(micro-S)2(dmit)2] [(n-Bu4N)2[4]], (n-Bu4N)2[W2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[5]], and (n-Bu4N)2[Mo2O2(micro-S)2(dmid)2] [(n-Bu4N)2[6]; dmid = 1,3-dithiole-2-one-4,5-dithiolate], has been synthesized by the excision of the polymeric (Mo3Q7Br4)x phases with PPh3 or 1,2-bis(diphenylphosphanyl)ethane in acetonitrile followed by the dithiolene incorporation and further degradation in air. Direct evidence of the presence of the intermediates with the formula [M3Q4(dmit)3]2- (M = Mo, W; Q = S, Se) has been obtained by electrospray ionization mass spectrometry. The crystal structures of (n-Bu4N)2[1], (PPh4)2[Mo2O2(micro-S)2(dmit)2] [(PPh4)2[2]; PPh4 = tetraphenylphosphonium], (n-Bu4N)2[2], (n-Bu4N)2[4], (PPh4)2[W2O2(micro-Se)2(dmit)2] [(PPh4)2[5]], and (n-Bu4N)2[6] have been determined. A detailed study of the gas-phase behavior for compounds (n-Bu4N)2[2-6] shows an identical fragmentation pathway for the whole family that consists of a partial breaking of the two dithiolene ligands followed by the dissociation of the dinuclear cluster.     

Preparation and properties of the full series of cuboidal clusters [Mo(x)W4-xSe4(H2O)12]n+ (n = 4-6) and their derivatives

Hydrothermal reactions between incomplete cuboidal cluster aqua complexes [M3Q4(H2O)9]4+ and M(CO)6 (M = Mo, W; Q = S, Se) offer easy access to the corresponding cuboidal clusters M4Q4. The complete series of homometal and mixed Mo/W clusters [Mo(x)W4-xQ4(H2O)12]n+ (x = 0-4, n = 4-6) has been prepared. Upon oxidation of the mixed-metal clusters, it is the W atom which is lost, allowing selective preparation of new trinuclear clusters [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+. The aqua complexes were converted by ligand exchange reactions into dithiophosphato and thiocyanato complexes, and crystal structures of [W4S4((EtO)2PS2)6], [MoW3S4((EtO)2PS2)6], [Mo4Se4((EtO)2PS2)6], [W4Se4((i-PrO)2PS2)6], and (NH4)6[W4Se4(NCS)12]-4H20 were determined. Cyclic voltammetry was performed on [Mo(x)W4-xCO4(H2O)12]n+, showing reversible redox waves 6+/5+ and 5+/4+. The lower oxidation states are more difficult to access as the number of W atoms increases. The [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+ species were derivatized into [Mo2WSe4(acac)3(py)3]+ and [MoW2Se4(acac)3(py)3]+, which were also studied by CV. When appropriate, the products were also characterized by FAB-MS and NMR (31P, 1H) data.     

Aqueous solution chemistry of [Mo3CuSe4]n+ (n = 4, 5) and [W3CuQ4]5+ (Q = S, Se) clusters

The triangular cluster [Mo3Se4(H2O)9]4+ reacts with Cu turnings to give a new heterometallic cuboidal cluster [Mo3CuSe4(H2O)10]4+(purple; UV/Vis lambda(epsilon): 352(3907), 509(2613)). The reaction of [Mo3Se4(H2O)9]4+ with CuCl afforded the 5+ cube [Mo3CuSe4(H2O)10]5+(red; UV/Vis lambda(epsilon): 356(5406), 500(3477)). In contrast, [W3Se4(H2O)9]4+ both with Cu and CuCl gives the 5+ cube, [W3CuSe4(H2O)10]5+(yellow-green; UV/Vis lambda(epsilon): 312(5327), 419(3256) and 628(680)). Cyclic voltammetry of [M3CuQ4(H2O)10]5+ in 2 M HCl (M = Mo, W; Q = S, Se) shows a reversible one-electron reduction wave for the Mo clusters, but no reduction occurs for the W clusters prior to H+ reduction. In HCl solutions, Cl is coordinated to the Cu site of the clusters, alongside some less extensive coordination to Mo and W, and for [W3(CuCl)S4(H2O)6Cl3]+, isolated as the supramolecular adduct with cucurbit[6]uril, [W3(CuCl)S4(H2O)6Cl3]2Cl2 x C36H36N24O12 x 12H2O, the crystal structure was determined (Cu-W 2.856(4) angstroms, W-W 2.7432(15) angstroms, Cu-Cl 2.167(13) angstroms).     

Synthesis and Crystal Structure of aNovelPolythiotungstate Compound[PPh4]2[（S）2W（μ—S）2（O）W（THF）（μ—S）2W（S）2]

1 INTRODUCTION Polythiotungstate complexes can be prepared from the protonation of one sulfur atom of [WS4]2－ and subsequent intramolecular redox reactions[1,2]. For example, [(S)2W(m-S)2W(m-S)2W(S)2]2 was formed by the acidification of a diluted aqueous solution of (NH4)2[WS4] with dilute H2SO4[3]. When a diluted aqueous solution containing [WS4]2 was acidified with 0.1mol/L HCl, [(S)2W(m-S)2(O)- W(H2O)(m-S)2W(S)2]2 was formed[4]. [(S)2W- (m-S)2(S)W(m-S)2W(S)2]2 was form…     

Synthesis and Structure of One Novel Polyoxometalate Compound Connected via Cerium(III) Cation with Three-dimensional Framework H_2{[K(H_2O)_2]_2[Ce(H_2O)_5]_2(H_2Mo_(1.16)W_(10.84)O_(42))}·8H_2O

One novel polyoxometalate compound connected via trivalent cerium cation as bridge H2{[K(H2O)2]2[Ce(H2O)5]2(H2Mo1.16W10.84O42)}·8H2O 1 was designed and synthesized in aqueous solution. X-ray diffraction analysis reveals that the structure of 1 is a three-dimensional framework assembled from the arrangement of H2Mo1.16W10.84O42 (named paradodecmetalate-B) and Ce(H2O)53+ containing two planes, which are constructed through the unification of H2Mo1.16W10.84O4210- and Ce(H2O)53+ along the [100] and [001] directions. Crystal data: H96Ce4K4Mo2.32O128W21.68, Mr = 7074.89, monoclinic, P21/n, a = 12.5037(17), b = 17.002(2), c = 12.7473(17) A, β = 105.966(2)°, V = 2605.4(6) 3, Z = 1, Dc = 4.509 g/cm3, F(000) = 3132, μ = 26.098 mm-1, R = 0.0377 and wR = 0.0789 (I > 2σ(I)).     

Synthesis and Structure of One Novel Polyoxometalate Compound Connected via Cerium(Ⅲ) Cation with Three-dimensional Framework H2{[K(H2O)2]2[Ce(H2O)5]2(H2Mo1.16W10.84O42)}·8H2O

One novel polyoxometalate compound connected via trivalent cerium cation as bridge H2{[K(H2O)2]2[Ce(H2O)5]2(H2Mo1.16W10.84O42)}·8H2O 1 was designed and synthesized in aqueous solution. X-ray diffraction analysis reveals that the structure of 1 is a three-dimensional framework assembled from the arrangement of H2Mo1.16W10.84O42 (named paradodecmetalate-B) and Ce(H2O)53 containing two planes, which are constructed through the unification of H2Mo1.16W10.84O4210- and Ce(H2O)53 along the [100] and [001] directions. Crystal data: H96Ce4K4Mo2.32O128W21.68, Mr = 7074.89, monoclinic, P21/n, a = 12.5037(17), b = 17.002(2), c = 12.7473(17) (A), β = 105.966(2)°, V = 2605.4(6) (A)3, Z = 1, Dc = 4.509 g/cm3, F(000) = 3132, μ = 26.098 mm(1, R = 0.0377 and wR = 0.0789 (I ＞ 2σ(I)).     

About the Keggin isomers: crystal structure of [N(C4H9)4]-gamma-[SiMo2W10O40]n- (n= 4 or 6)

The tetrabutylammonium gamma-dodecatungstosilicate has been crystallized in a 6/1 acetonitrile/water solvent. An X-ray single-crystal analysis was carried out on [N(C4H9)4]4-gamma-[SiW12O40] which crystallizes in the orthorhombic system, space group P2(1)2(1)2(1), with a = 19.0881(3) A, b = 21.4435(3) A, c = 26.0799(1) A, V = 10674.9(2) A3, Z = 4, and rho(calcd) = 2.392 g/cm3. The idealized C2v arrangement of the anion results from the rotation of 60 degrees of two trigonal [W3O13] groups in the Keggin anion. Taking as reference the geometrical characteristics of the Keggin anion, it appears that the bond lengths and bonds angles within the four [W3O13] groups are not significantly modified while the mu-oxo junctions between the two rotated groups and those between the two unrotated groups involve more acute and opened W-O-W angles, respectively. The syntheses and 183W NMR characterizations of the mixed gamma-[SiW10Mo2O40]n- compounds corresponding to the oxidized (Mo(VI); n = 4) and to the two electron-reduced (Mo(V); n = 6) anions are reported. Structural analysis by 183W NMR has proved unambiguously that the C2v structure of the gamma-[SiW10O36]8- subunit is retained in both the compounds. The electronic behavior of the series gamma-[SiW10M2E2O36]6- (M = Mo or W; E = O or S) is examined, compared and related to 183W NMR data.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Synthesis and redox properties of triarylmethane dye cation salts of anions [M6O19]2- (M = Mo, W)

Four salts have been isolated combining the triarylmethane dye cations pararosaniline (PR(+)) and crystal violet (CV(+)) with the hexametalates [M(6)O(19)](2-) (M = Mo, W). A new hexatungstic acid H(2)[W(6)O(19)]·4dma (dma = dimethylacetamide) was isolated and is a useful synthon for hexatungstate salts. Single-crystal X-ray diffraction confirmed the presence of PR(+) and [Mo(6)O(19)](2-) ions in [PR](2)[Mo(6)O(19)]·6dmf (dmf = dimethylformamide). A number of charge-assisted hydrogen bonds N-H···O exist between the cation -NH(2) functions and the anion oxygen atoms. Comparative cyclic voltammetry of salts [A]Cl (A = PR, CV), [Bu(4)N](2)[M(6)O(19)](2-) and A(2)[M(6)O(19)] was established in MeCN and Me(2)SO solutions and of solids in contact with the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [emim][tfsa]. In the molecular solvents, the reversible potential for the process [Mo(6)O(19)](2-/3-) is less negative than the first reduction processes of the dye cations. In contrast, that for [W(6)O(19)](2-/3-) is more negative. Spectro-electrochemistry and bulk electrolysis experiments reveal significantly different pathways in the two cases. In contrast, in the [emim][tfsa] medium, a positive shift in reduction potential of at least 400 mV is seen for the anion processes but relatively little change for the dye cation processes. This means that initial reduction of the anions always precedes that of the dyes, providing significant simplification of the complex voltammetric data. Chemically modified electrodes can be used in the ionic liquid because of slow dissolution kinetics. However, reduced anion salts dissolve rapidly, allowing dissolved phase electrochemistry to be examined. The electrochemistries of the oxidized salts A(2)[M(6)O(19)] are essentially those of the individual ions, although low level interaction of A(+) with reduced anions [M(6)O(19)](3-,4-) is evident. The work establishes protocols for synthesis and handling of intensely absorbing and relatively insoluble salts which can now be applied to systems containing more complex polyoxometalate anions.