S-(2-乙酰苯基)-二甲基硫代氨基甲酸酯环合产物的确定

通过1H NMR,NOE和X-ray等方法,确定了S-(2-乙酰苯基)-二甲基硫代氨基甲酸酯在NaH/DMF条件下的环合产物为苯并-2H-噻喃-2-酮,而非文献报道的苯并-4H-噻喃-4-酮.探讨了苯并-2H-噻喃-2-酮和苯并-4H-噻喃-4-酮结构在氢谱上的规律性差异.     

3,4-二苯基-4-氧(硫)代-1,3,4-二氮磷杂环戊-2-硫酮的合成、结构及其反应机理研究

本文研究了苯基硫脲、苯基二氯化膦与脂肪醛(酮)在无水苯中进行的类Mannich反应,在分离产物时发现,除了生成3,4-二苯基-4-氧代-1,3,4-二氮磷杂环戊-2-硫酮(Ⅰ)外,还得到了少量3,4-二苯基-4硫代-1,3,4-二氮磷杂环戊-2-硫酮(Ⅱ).根据化合物Ⅱ的生成及³¹PNMR跟踪反应的结果,得出反应机理为P-H键对亚胺衍生物的加成.通过X射线衍射分析发现,化合物Ⅰ和Ⅱ的五元杂环均为平面结构,其平面性受4位氧代或硫代的影响较大.     

外周苯二氮受体示踪剂的合成和评价

合成了用作外周苯二氮受体潜在的选择性配体的N,N-二乙基-2-(4-碘苯基)-6-三氟甲基-咪唑并[1,2-a]吡啶-3-乙酰胺(ITFZOL).其放射性标记物[125I]ITFZOL通过碘脱锡化反应制备,放化得率75%~85%,比活度大于76GBq/μmol.小鼠尾静脉注射[125I]ITFZIOL后,放射性集中分布于肾上腺、肺、肾、心、嗅球和小脑等外周苯二氮受体高密度区域.预先给与外周苯二氮受体选择性配体PK11195明显减少外周苯二氮受体高密度区域放射性分布,提示[125I]ITFZOL对外周苯二氮受体具有较高的特异亲和性.生物活性数据表明,[125I]ITFZO是一种潜在的选择性外周苯二氮受体单光子放射性配体.     

4,5-二氧-(2-硫)-1,3,2,4-二氮二磷杂环戊烷衍生物的合成

本文报道了22个新的4,5-二氧-(2-硫)-1,3,2,4-二氮二磷杂环戊烷化合物。对合成路线和条件作了初步探讨。产物的结构经IR、¹H和³¹PNMR及元素分析得到证实,测定了部分产物的MS。在³¹PNMR谱中产物的顺式和反式异构体均得到了指认。部分产物的生物活性初步测定结果表明,它们具有一定的除草和抑菌活性。     

3-取代苯甲酰氨基-2-硫代-2,4-噻唑烷二酮类衍生物的新合成法

通过简便的路线合成了8个3-取代苯甲酰氨基-2-硫代-2,4-噻唑烷二酮衍生物,并对其反应机理进行了讨论.所有化合物的结构均经元素分析、₁HNMR、IR和MS谱确认.初步的生物活性测试结果表明,代表化合物表现出良好的抗菌活性和植物生长调节活性.     

芳香桥式双(苯并氮杂-15-冠-5)的合成及其对碱金属和重金属离子的选择键合

通过11,12-苯并-1,7,10,13-四氧杂-4-氮杂环十五烷-11-烯(苯并氮杂-15-冠-5)分别与间二苄溴, 间苯二甲酰氯和对苯二甲酰氯反应, 合成了N,N'-间二苄基双(苯并氮杂-15-冠-5) (1)、N,N'-间苯二甲酰基双(苯并氮杂-15-冠-5) (2)和N, N'-对苯二甲酰基双(苯并氮杂-15-冠-5) (3) 等三个芳香桥式双(苯并氮杂-15-冠-5)衍生物, 并解析了化合物3的晶体结构. 进而采用溶剂萃取的方法研究了它们与一价金属阳离子的键合行为. 结果表明, 双冠醚2对碱金属钠离子和重金属铊离子表现出较高的选择萃取能力, 而双冠醚1对重金属银离子表现出较高的选择萃取能力.     

硫杂杯-1,3-2,4-氮杂双冠醚的合成与氨基酸配合性能

对叔丁基硫杂杯四酰肼衍生物(2)与邻苯二甲醛发生分子内1+2缩合反应, 合成了首例1,3-交替构象的硫杂杯-1,3-2,4-氮杂双冠醚(3), 产率为65%. 其结构经元素分析、质谱、核磁共振谱等表征证实. 用UV-Vis光谱法和1H NMR谱研究了化合物3与系列α-氨基酸的识别配合性能, 并计算出其配合常数. 结果表明, 主体分子3对所测试的α-氨基酸有较好的配合作用, 主客体分子形成1∶1的配合物.     

3-杂环基硫取代-1,3,4,5-四氢-2-氧代-苯并氮杂衍生物的合成

以芳酰肼为原料,合成了一系列3-巯基-5-芳基-1,2,4-三唑、2-巯基-5-芳基-1,3,4-噁二唑和2-巯基-5-芳基-1,3,4-噻二唑,并通过硫原子对3-溴-2-氧代-苯并氮杂3-位上的亲核取代反应将杂环化合物引入了苯并氮杂的结构当中,合成了32个新的苯并氮杂杂环衍生物.为提高其在有机溶剂中的溶解性,在苯并氮杂的N原子上引入乙酸乙酯和乙酸叔丁酯基取代基,合成了36个新衍生物.所有化合物经质谱、核磁共振谱及元素分析确证了结构并初步测定了抗菌活性.     

1,4-双(取代苯乙炔基)苯及反,反-1,4-双(β-取代苯乙烯基)苯的电子光谱的研究

测定了1,4-双(取代苯乙炔基)苯(Ⅰ)和反,反-1,4-双(β-取代苯乙烯基)苯(Ⅱ)的紫外光谱、荧光光谱.用CNDO/S-CI和HMO方法对苯乙炔、二苯乙炔和(Ⅰ)及苯乙烯、1,2-二苯乙烯和(Ⅱ)的激发能进行了计算和研究.讨论了化合物结构对光谱的影响.     

3-杂环基硫取代-1,3,4,5-四氢-2-氧代-苯并氮杂衍生物的合成

以芳酰肼为原料, 合成了一系列3-巯基-5-芳基-1,2,4-三唑、2-巯基-5-芳基-1,3,4-噁二唑和2-巯基-5-芳 基-1,3,4-噻二唑, 并通过硫原子对3-溴-2-氧代-苯并氮杂3-位上的亲核取代反应将杂环化合物引入了苯并氮杂的结构当中, 合成了32个新的苯并氮杂杂环衍生物. 为提高其在有机溶剂中的溶解性, 在苯并氮杂的N原子上引入乙酸乙酯和乙酸叔丁酯基取代基, 合成了36个新衍生物. 所有化合物经质谱、核磁共振谱及元素分析确证了结构并初步测定了抗菌活性.     

10-(4-联苯基)-2-异丙基噻吨酮硫鎓六氟磷酸的合成与表征

以2-异丙基硫杂蒽酮为原料,乙腈为溶剂经硝酸铈铵氧化得到中间体2-异丙基硫杂蒽酮亚砜,在硫酸存在的条件下,再与联苯反应得到锍盐中间体,最后以醇类和水为混合溶剂,锍盐中间体与六氟磷酸钾进行离子交换得到10- (4-联苯基)-2-异丙基噻吨酮硫鎓六氟磷酸,通过紫外光谱、红外光谱和核磁共振测定,对产物进行了结构确证。     

Zur addition des thiomethyl-kations an die Wolfram-Kohlenstoff-Doppelbindung in [Cp(CO)(PMe3)WC(Tol)PR2][PF6]

Carbonyl(η⁵-cyclopentadienyl)(trimethylphosphine)[η²-(dimethylphenylphosphino-4-methylphenylcarbene]tungsten hexafluorophosphate reacts with dimethyl(methylthio)sulfonium tetrafluoroborate to yield the dicationic complexes tungstaphosphathiabicyclo[1.1.0]butane.     

Photocationic and radical polymerizations of epoxides and acrylates by novel sulfonium salts

Novel sulfonium salts [methyl‐, 2‐indany‐, or 1‐ethoxycarbonylethyl methyl‐2‐naphthylsulfonium hexafluorophosphate and 2‐indany‐, 1‐ethoxycarbonylethyl‐, 2‐methyl‐2‐phenylpropyl‐, 2‐phenylpropyl‐, 2‐phenylethyl‐, 2‐(4‐methoxyphenyl)‐ethyl‐, or 3‐(4‐methoxyphenyl)‐2‐propyl methylphenylsulfonium hexafluorophosphates] were synthesized by the reaction of dimethylsulfate and the corresponding sulfides followed by anion exchange with KPF₆. These sulfonium salts could polymerize epoxy monomers at lower temperatures than previously reported for benzylsulfonium salt initiators. In particular, sulfonium salts with naphthyl groups showed higher photoactivity than already reported for di(4‐tert‐butylphenyl)iodonium and triphenylsulfonium hexafluorophosphates. These sulfonium salts showed higher activity in photoradical polymerization and photocationic polymerization. The photopolymerization was accelerated by the addition of 4‐methoxy‐1‐naphthol, N‐ethylcarbazole, 2,4‐dimethylthioxanthone, phenothiazine, and 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3816–3827, 2003     

Factors influencing EB curing of epoxy matrix

The effectiveness of electron beam (EB) curing of epoxy resins was found to be influenced by catalyst. In the presence of iodonium salt (diaryl iodonium hexafluoroantimonate, C3), the EB curing of epoxy resin is easier than in the presence of triaryl sulfonium hexafluoroantimonate (C1), or triaryl sulfonium hexafluorophosphate (C2), or iron arene containing cationic catalyst (Irgacure 261). The epoxy 616 (diglycidyl ether of bisphenol A) and 648 (diglycidyl ether of phenolic novolacs) can be cured by the above onium salts catalysts C1–C3. The epoxy with glycidyl amino epoxide group (such as AG 80; AFG 90) could not be cured by onium salts catalyst. The influence of irradiation dose, temperature and the effect of impurities on curing reaction were investigated.     

Photochemistry and initiation behavior of phenylethynyl onium salts as cationic photoinitiators

Phenyl(phenylethynyl)iodonium hexafluorophosphate and diphenyl(phenylethynyl)sulfonium hexafluorophosphate were synthesized for application as cationic photoinitiators using simple, straightforward methods. Quantification of the purity of the counterion was determined by FTIR analysis with subsequent mathematical peak deconvolution. Photodecomposition products for direct irradiation were determined in steady state photolysis experiments yielding diphenyl sulfide and phenyl(phenylethynyl) sulfide or iodobenzene, respectively, as main products. Heterolytic cleavage was proposed as main photodecomposition pathway because low yields of phenylacetylene radical recombination products and no photoproducts generated by phenyl radicals, including benzene, were detected. High activity as photoinitiators was verified by photo‐DSC experiments in direct irradiation and in photosensitized initiation using 9,10‐dibutylanthracene, 2‐isopropylthioxanthone, and surprisingly also benzophenone as sensitizers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3419–3430, 2009     

Evidence for intermolecular interaction between sulfonium and sulfide sulfur atoms and its application to synthesis of cyclic bis(disulfide) dimer

On the basis of the remote Pummerer reaction of p-bis(alkylthio)-aromatic S-oxides, the intermolecular interaction between the sulfonium and sulfide sulfur atoms is described. (1) In marked contrast to the Pummerer reaction of 1b-d(3) with (CF(3)CO)(2)O (J. Org. Chem. 1999, 64, 3190-3195), the reaction of 3,3',5,5'-tetramesityl-4-(trideuteriomethylsulfinyl)-4'-(methylthio)biphenyl (1a-d(3)) as a sterically hindered analogue of 1b gave only 2a-d(2). (2) Both reactions of the two unsymmetrical regioisomers of 1-(ethylthio)-4-(methylthio)benzene S-oxide (5a and 5b) with (CF(3)CO)(2)O afforded a mixture of the mono-Pummerer products 6a and 6b, the bis-Pummerer product 7, and the bis-sulfide 8 in a similar ratio. The quenching at the initial stage of both reactions produced 5a, 5b, 8, and the bis-sulfoxide 10 in a similar ratio. These results indicate the equilibrium in the intermolecular interaction between the sulfur atoms. (3) The reaction of the p-bis(benzylthio)-aromatic S-oxide 16 with (CF(3)SO(2))(2)O gave the cyclic bis(disulfide) dimer 17 for the diphenyl sulfide and diphenylmethane spacers or the cyclic tetrakis(disulfide) tetramer 19 for the benzene and biphenyl spacers via the debenzylation of an intermolecular dithia dication. The cyclic bis(dithia dication) dimer A resulting from the intermolecular interaction between the sulfonium and sulfide sulfur atoms is proposed as an intermediate throughout the present reactions.     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate-styrene initiated by sulfonium salts. II. Photocrosslinking behaviors

Vinylether was used as a cationically polymerizable moiety and incorporated into sidechain of polymers as copolymers of vinyloxyethyl methacrylate (VEM) and styrene (St). Photoirradiation of the copolymers containing a small amount of benzyl(4-hydroxyphenyl) methylsulfonium salt (BSS) resulted in a high crosslinking density as evidenced by a low degree of swelling, which is ascribed to the high reactivity of the vinyloxy moieties. The sensitivity of this photoreaction is significantly high because of a large kinetic chain length of the cationic polymerization of vinylethers, while copolymers of glycidyl methacrylate and St showed crosslinking to much less extent when irradiated under the same condition. The ability of other sulfonium salts, (4-hydroxyphenyl) methyl(4-nitrobenzyl) sulfonium salt and (4-hydroxyphenyl) methyl(1-naphthylmethyl)sulfonium salt, to induce photocrosslinking was also examined. © 1992 John Wiley & Sons, Inc.     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

新型锍鎓盐类光生酸剂的合成及产酸性能研究

成功合成了两种新型锍鎓盐类光生酸剂,其结构经¹1HNMR和MS分析确认,并对其基本物性及在405、365nm光下乙腈溶液中的分解及产酸性能进行了研究,通过计算得出了分解及产酸量子产率.结果表明,两种化合物有较高的热分解温度和在常用有机溶剂中有较好的溶解性;在405nm光源下,4-(9′-苯基蒽基)苯基三氟甲磺酸锍鎓盐(PAGS1)和4-(4′-N,N-二乙基-1′-苯乙烯基)苯基三氟甲磺酸锍鎓盐(PAGS2)的分解量子产率分别为10%和15%,产酸量子产率为8.1%和13%;但在365nm光源下,分解及产酸量子产率均很低,说明两种光生酸剂对于405nm波长的光较敏感,适宜作为405nm光源下的光生酸剂.     

Cationic photopolymerization of 1,3-di(9-carbazolyl)-2-propanol glycidyl ether

An absorbance probe method was used for the investigation of photolysis of cationic photoinitiators. The rates of the photolysis of diphenyliodonium hexafluorophosphate (DPIH), diphenyliodonium tetrafluoroborate (DPIB), di(tert-butylphenyl)iodonium tetrafluoroborate (DTIB), di(tert-butylphenyl)iodonium bromate (DTIBr), triphenylsulfonium hexafluorophosphate (TPS) and cyclopropyldiphenylsulfonium tetrafluoroborate (CPS) were studied in the presence of acid indicator quinaldine red (QR) in acetonitrile. Diphenyliodonium hexafluorophosphate and triphenylsulfonium hexafluorophosphate showed the highest photolysis rate. Photopolymerization of 1,3-di(9-carbazolyl)-2-propanol glycidyl ether (DCPGE) initiated with the iodonium and sulfonium salts in bulk and in solution was studied. It was established that the highest initial rate of polymerization is characteristic of DCPGE photopolymerization initiated with DPIH and TPS in bulk. The oligomers of DCPGE of number average molecular weight ( [`(M<sub>n</sub>)]\overline{M_n} ) ranging from 710 to 1220 were obtained in these reactions in bulk and those with [`(M_n)]\overline{M_n} ranging from 1300 to 1600 were obtained in solution.