三元体系YCl3-CdCl2-H2O和四元体系YCl3-CdCl2-HCl(～8.8%)-H2O (25 ℃)的相平衡及其固相新化合物的研究

The equilibrium solubilities of the ternary system YCl₃-CdCl₂-H₂O, the quaternary system YCl₃-CdCl₂-HCl(～8.8%)-H₂O were determined at 25 ℃ and the phase diagrams were constructed. The results show that the ternary system was complicated with six equilibrim solid phases CdCl₂·2.5H₂O, CdCl₂·H₂O, 8CdCl₂·YCl₃·15H₂O (8∶1 type), 4CdCl₂·YCl₃·13H₂O(4∶1 type), 5CdCl₂·2YCl₃·26H₂O (5∶2 type) and YCl₃·6H₂O. The quaternary system was also complicated with four equilibrim solid phase CdCl₂·H₂O, 4CdCl₂·YCl₃·13H₂O (4∶1 type), 5CdCl₂·2YCl₃·26H₂O(5∶2 type) and YCl₃·6H₂O. Among the three new compounds 8CdCl₂·YCl₃·15H₂O, 4CdCl₂·YCl₃·13H₂O and 5CdCl₂·2YCl₃·26H₂O, 8CdCl₂·YCl₃·15H₂O was a kind of metastable compound only in ternary system, and it was changed into 4CdCl₂·YCl₃·13H₂O with time. Both 4∶1 type and 5∶2 type existed in ternary and quaternary system, but they were also congruently soluble compounds in quaternary system. They have been prepared from the system and have been characterized by XRD, TC-DTG and DSC.     

四元体系CdCl2-LaCl3-(9.7%)HCl-H2O在298K的相平衡及其固相化合物的研究

The equilibrium solubility of the LaCl₃-CdCl₂-(9.7%)HCl-H₂O quaternary system at 298K was determined and the phase diagram was constructed. The results show that the system is complicated with four equilibrium solid- phases CdCl₂·H₂O， 8CdCl₂·LaCl₃·16H₂O(8∶1 type)， 4CdCl₂·LaCl₃·12H₂O(4∶1 type) and LaCl₃·7H₂O， respectively. The two new compounds 8CdCl₂·LaCl₃·16H₂O(8∶1 type) and 4CdCl₂·LaCl₃·12H₂O(4∶1 type) are congruently soluble in ～9.7% HCl-H₂O medium and have not yet been reported in literatures. Both com-pounds have been prepared from the system and have been characterized by XRD， TG-DTG and DSC.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

[{Zn(3-SBA)(2，2′-bipy)(H2O)2}·H2O]n的合成和晶体结构研究

A novel coordination ploymer [{Zn(3-SBA)(2,2′-bipy)(H₂O)₂}·H₂O]_n was synthesized by the hydrothermal reaction of 3-Na₂SBA, ZnSO₄·7H₂O and 2,2′-bipy. The structure was characterized by elemental analysis, IR and single crystal X-ray diffraction. The title coordination ploymer crystallized in monoclinic with space group P2₁, a=0.803 42(18) nm, b=1.501 8(3) nm, c=0.821 13(19) nm, β=109.350(4)°. The coordination polymer has an infinite chain structure and its luminescent property has also been studied. CCDC: 282746.     

EuCl3-CdCl2-HCl-H2O(25 ℃)的相平衡及其固相化合物

测定了四元体系EuCl₃-CdCl₂-HCl-H₂O(25 ℃)的相平衡溶度数据，绘制了相应的溶度图。该四元体系是复杂体系且有2个新物相化合物9CdCl₂·EuCl₃·22H₂O和4CdCl₂·EuCl₃·14H₂O生成。2个新物相化合物用XRD及TG-DTG和荧光光谱进行了研究。结果表明，新物相化合物均属单斜     

球形La2O3∶Eu纳米晶的制备及其发光特性

The spheric La₂O₃∶Eu nanocrystals were prepared using NH₃·H₂O-NH₄HCO₃ mixture as precipitant. The material was characterized by FTIR, XRD and TEM techniques. The luminescence properties of Eu³⁺ in spheric La₂O₃ were measured by three dimension spectra, emission and excitation spectra. The results indicate that the La₂O₃∶Eu nanocrystals are in hexagonal phase by annealing at 800 ℃, the crystal size is about 30 nm. The maximum emission and excitation wavelength were determined by three dimensional spectroscopy to be at 591 nm and 394 nm, respectively. In emission spectrum the band at 591 nm and 612 nm are corresponding to ⁵D₀-⁷F₁ and ⁵D₀-⁷F₂ transition of Eu³⁺ ions. With increasing in annealing temperature the differences of intensity of the two transitions are increased. This phenomenon shows that the luminescence intensity of La₂O₃∶Eu nanocrystals can be tuned by changing annealing temperature.     

CsCl-TmCl3-HCl-H2O(25 ℃)的相平衡及其固相化合物

The equilibrium solubilities of the quaternary system CsCl-TmCl₃-HCl-H₂O was determined at 25 ℃ and the corresponding equilibrium diagram was constructed. The diagram is a complicated system with limited solid solutions and formation of a new compound 3CsCl·2TmCl₃·14H₂O. The new compound has been characterized by XRD, TC-DTG and fluorescence spectrometry. Results show that upconversion spectrum exhibits at 335 nm when exciting at 860 nm, and fluorescence spectrum exhibits at 295 nm and 385 nm when exciting at 240 nm. The compound loses its crystal water by four steps at 50 to 250 ℃. Using a heat conduction calorimeter, the standard molar enthalpy of dissolution of 3CsCl·2TmCl₃·14H₂O was determined to be (-11.601 ± 0.050) kJ·mol^-1 at 298.15 K.     

Sr3SiO5∶Eu2+荧光粉的微波合成及性能研究

Silicate orange yellow phosphor used in white-light LED was prepared by microwave method. The structure and optical properties of phosphor were studied. Sr₃SiO₅∶Eu²⁺ phosphor synthesized by microwave method is tetragonal structure of Sr₃SiO₅ with uniform particle distribution. Luminescence spectrum is a broad band spectrum peaking at 575 nm. The peak of excitation is at 532 nm and phosphor can be excited by blue LED. The warm white light was obtained combined phosphor and blue LED. The CIE chromaticity coordinates and correlated color temperature of white light is (x=0.394, y=0.341) and 3 239 K respectively.     

MgFe2O4纳米粉体的水热合成及其表征(英)

MgFe₂O₄ nanoparticles were hydrothermally synthesized at 150 ℃ using iron nitrate [Fe(NO₃)₃·9H₂O], magnesium nitrate [Mg(NO₃)₂·6H₂O] and sodium hydroxide (NaOH) as starting materials by carefully controlling the reaction conditions. The influences of several factors such as presence or absence of Na⁺, molar ratio of Fe³⁺ / Mg²⁺, concentration of mental ions, temperature and reaction time on resultant products were investigated in the hydrothermal process. The sample was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), and its magnetic properties were measured using vibrating sample magnetometer (VSM).     

MgSO4·5Mg(OH)2·3H2O的水热合成及反应时间对其形貌的影响

Both whisker and nanometer MgSO₄·5Mg(OH)₂·3H₂O(MOS) were prepared by hydrothermal method at 140℃ for different times， using NaOH and MgSO₄·7H₂O as raw materials. The MgSO₄·5Mg(OH)₂·3H₂O part- icles were characterized by powder X-ray diffraction(XRD)，thermal analysis(TGA-DSC)， infrared spectroscopy(FT-IR)，transmission electron microscopy(SEM) and scanning electron microscopy(TEM). The size distribution in whisker-like and nanocrystalline materials are in the range of 10～50μm and 10～20nm respectively. The whisker MOS is metastable phase in MgSO₄-NaOH-H₂O system at 140℃，whereas nanometer MOS is stable phase.     

草酸盐共沉淀法制备Y1.84La0.16O3纳米粉体

Nanopowder of Y_1.84La_0.16O₃ was prepared by oxalate co-precipitation method. The powder was characterized by TG-DTA, XRD and TEM. The results show that the precursor is Re₂(NO₃)₂(C₂O₄)₂·2H₂O (Re=Y, La), and the Y_1.84La_0.16O₃ nanopowders produced by calcining the precursor at 1 000 ℃ for 4 h are 20～40 nm spherical particles and well dispersed. The powders were with high sintering activity and could be fabricated to transparent ceramic without additive at 1 450～1 550 ℃ in H₂ atmosphere for 3 hours. The total transmission of the transparent ceramic could reach 80%.     

Dawson结构(NH4)6P2Mo18O62·12H2O纳米粉体的室温固相合成及形成机理

以H₆P₂Mo₁₈O₆₂·23H₂O和(NH₄)₂C₂O₄·H₂O为原料，首次采用室温固相反应合成出(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体，并运用元素分析、FTIR、XRD、TEM、TG-DTA和BET等技术对其组成、结构和性能进行了表征。发现(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体平均粒径为40 nm，保留着杂多阴离子的Dawson结构，具有Dawson结构的特征衍射峰，比表面积为143.9 m²·g^-1，在445 ℃以下杂多阴离子有良好的热稳定性。在该固相反应中，研磨和放热反应热能可加速反应物分子的扩散速率和生成物分子的成核速率，使产物粒径减小；反应物含有结晶水和生成物H₂C₂O₄·2H₂O对形成小粒径的(NH₄)₆P₂Mo₁₈O₆₂·12H₂O纳米粉体起关键作用。     

预氧化固气法合成LiNiO2的研究

LiNiO₂ was prepared by reaction of stoichiometric amounts of thoroughly-mixed LiOH·H₂O and preoxidation nanometer-scale Ni₃O₂(OH)₄ powders in O₂ at the temperature of 700℃ for 6h. The products were tested by XRD， XPS， SEM and electrochemistry methods. It was shown that product was LiNiO₂ single-phase， and the valence of nickel was +3; the average size of it was 40nm; its initial charge specific capacity is 168mAh·g^-1 and the coulomb efficiency is 90%; the second charge specific capacity is 160mAh·g^-1 and the coulomb efficiency is 96%.     

新型纳米多孔SiO2气凝胶微球材料的制备

A new type of nanoporous SiO₂ aerogel microsphere materials were synthesized by using SiO₂ sols as raw materials in the W/O emulsion formed by the emulsification of Tween-85 and Span-80. The obtained wet gel microspheres were aged by a successive solvent exchanging of alcohol, tetraethylorthosilicate (TEOS)/ethanol solution and ethanol at 60 ℃, and then were dried at ambient pressure to produce SiO₂ aerogel microspheres. The resultant SiO₂ aerogel microspheres were characterized by SEM, TEM and nitrogen adsorption-desorption. The results show that the prepared SiO₂ aerogel microspheres are nanoporous materials with coherent network nanoporous structure consisting of SiO₂ nanoparticles with an average diameter of about 10 nm. The apparent density of a typical sample is 0.4 g·cm^-3, while the specific surface area is 386 m²·g^-1, and the average pore size is 18 nm with the porosity of 84%. Various SiO₂ aerogel microspheres with the apparent particle sizes of 10～200 μm can be synthesized by controlling the stirring speed at 600～2 000 r·min^-1, the volume ratio of water/oil from 0.10 to 0.30, and the weight ratio of Tween-85/Span-80 less than 0.40.     

Bi2Fe4O9纳米粉体:水热法制备及表征

Bi₂Fe₄O₉ nanoparticles were prepared at low temperature via a facile, one-step hydrothermal synthesis process using iron(Ⅲ) nitrate nonahydrate(Fe(NO₃)₃·9H₂O) and bismuth nitrate pentahydrate (Bi(NO₃)₃·5H₂O) as starting materials and sodium hydroxide (NaOH) as the precipitant and mineralizer. XRD results indicate that the as-prepared nanoparticles are pure Bi₂Fe₄O₉. SEM images reveal that the as-prepared Bi₂Fe₄O₉ nanoparticles have a sheet-like morphology. The Bi₂Fe₄O₉ nanoparticles thus obtained are paramagnetic at room temperature as shown by magnetic measurements.     

铟锡氧化物纳米网的微波法制备及其光催化特性研究

By using ultrasonic and chemical liquid coprecipitation, the precursor was prepared with high purity In, SnCl₄·5H₂O and urea. The In₂O₃·SnO₂ nanonets were obtained from precursor by heating in microwave oven. The powders were characterized by XRD, TEM. The analyzed results show the sample is In₂O₃·SnO₂, and In₂O₃is rhombohedral system while SnO₂ is tetragonal system. The sample is in spherical grain shape, with average granularity of 35 nm, and the mesh diameter of 10～80 nm. The sample was with fluorescence and good photocatalytic performance for degradation of organic dyestuff.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

[Zn(en)3]SO4配合物大尺寸单晶的水热法生长和表征

Large size single crystals of [Zn(en)₃]SO₄ have been successfully grown by a hydrothermal process at 160℃ for 24h， using CuSO₄·5H₂O， ethylene diamine and reductive Zn powder as reactants. The diameters of the single crystals are range from 0.5mm to 1mm， and lengths reach up to 20mm. The single crystals were characterized by XRD analysis， FTIR and UV-Vis spectrum absorption measurements. The single crystal was confirmed to be [Zn(en)₃]SO₄ by performing powder diffraction of the single crystal. X-ray diffraction of the single crystals shows (100)-face to be cleavage face. The diffraction peaks are sharp and rocking curve for 200 diffraction has a narrow FWHM (the full width at half maximum)， which indicate the single crystal of [Zn(en)₃]SO₄ is perfect with less lattice distortion and defects. The single crystal appears transparent，and has constant weak absorption in UV-Vis spectrum region，which could be used as a novel optical crystal material.     

纳米MgNb2O6微波介质陶瓷粉体制备及表征

Nano-crystalline MgNb₂O₆ was prepared using Mg(NO₃)₂·6H₂O, Nb₂O₅, HF and citric acid as raw materials by auto-ignition route. The process involves the formation of a viscous gel by thermal dehydration of the citrate-nitrate solution at about 80 ℃. The auto-ignition (at about 200 ℃) of the gel resulted in a high reactivity powder containing intimate blending of MgNbF₇ and NbF₃. The crystalline phase of MgNb₂O₆ could be formed easily at 700 ℃, which is 400 ℃ lower than that of common solid-state reaction process. The nano-crystalline MgNb₂O₆ (～30 nm) powder with good dispersity could be obtained at 850 ℃.     

N2O活化的Fe/ZSM-5表面活性氧的表征(英)

Temperature-programmed reduction (H₂-TPR) was employed to quantitatively characterize the active oxygen species generated from a high Fe-loading Fe/ZSM-5 catalyst exposed to N₂O at 250 ℃. [Fe-O-Fe]²⁺ dimer was determined as the active iron complex for N₂O decomposition to produce the active oxygen. Reduction of Fe³⁺ to Fe²⁺ by H₂ in the dimer and removal of OH^- groups from Fe²⁺ dimer by heating Fe/ZSM-5 to 700 ℃ were the prerequisites for the formation of this active Fe complex. A linear correlation with a slope of 1.0 between the amount of [Fe-O-Fe]²⁺ and that of active oxygen species was observed. Maximum amount of active oxygen species can be generated by reducing Fe/ZSM-5 catalyst with H₂ at the temperatures over 500 ℃ and then heating the resulting product in Ar to 700 ℃, followed by N₂O exposure at 250 ℃. The ratio of the total number of oxygen atoms (Ode) deposited by interaction of [Fe-O-Fe]²⁺ with N₂O to the amount of [Fe-O-Fe]²⁺ was 2. However, not all the deposited oxygen atoms were active oxygen (O_a); the ratio of O_a and O_de was 0.5. The iron dimer complex composing active oxygen is a five-atom ion [Fe₂O₃]²⁺; the most probable structure is as follows: