SHER-HIAF ring lattice design

The Super Heavy Experimental Ring (SHER), which is one of the rings of the next accelerator complex High Intensity Heavy Ion Accelerator Facility (HIAF) at IMP, has to be optimized for e-cooling. Its lattice is designed for two modes: the first is the isochronous mode, which is a time-of-flight mass spectrometer for short-lived secondary nuclei, the second is the storage ring mode, which is used for collecting and cooling the secondary rare isotope beams from the transport line. In order to fulfil its purpose, the ion optics can be set to different ion optical modes.     

HIAF中环形质量谱仪SRing的线性设计

为了精确测量短寿命原子核质量,提出了在强流重离子加速器装置(HIAF)上建造高精度环形质量谱仪SRing。SRing长188.7 m,最大设计磁刚度为1 3 T·m,主要由磁聚焦结构、注入系统、引出系统、随机冷却以及探测系统等组成。SRing将运行在等时性模式和收集模式下用于短寿命原子核质量的精确测量和放射性次级束流收集并纯化。详细介绍了SRing的线性光学设计,并给出两种模式下的光学设计、注入及引出系统的设计等,设计参数优化完毕后,机器测量精度有望提高到10~6。     

多模式离子推力器栅极系统三维粒子模拟仿真

栅极系统是离子推力器推力产生的主要部件,推力器的性能和寿命都与栅极系统密切相关.对于具有多种工作模态的离子推力器,基于电流电压入口的仿真可以有效评估推力器的工作状况.采用三维粒子模拟方法对两栅极系统等离子体输运过程进行了仿真,获得了不同模式下的推力器性能参数,对比NSTAR的在轨测试参数,验证了模型的正确性;分析了工作模式变化对栅极区域电场分布和束流状态的影响以及离子推力器多模式设计需求.分析结果表明:远离栅极系统的外凸型屏栅鞘层和内凹型零等势面、低鞍点电势值和平缓的下游电势分布,有利于提高栅极系统离子通过率,抑制电子返流,减小Pits-and-Grooves腐蚀,是离子推力器工作模式的设计方向;提高束流电压会导致发散角损失增大,但可扩展栅极工作电流范围,在束流强度较大的模式下,使束流具有较好的聚焦状态,有利于减小Barrel腐蚀.研究结果为多模式离子推力器工作模式设计提供了参考.     

Floquet analysis of fundamental,subharmonic and detuned secondary instabilities of Grtler vortices

Nonlinear parabolized stability equations are employed in this work to investigate the nonlinear development of the Grtler instability up to the saturation stage. The perturbed boundary layer is highly inflectional both in the normalwise and spanwise directions and receptive to the secondary instabilities. The Floquet theory is applied to solve the fundamental,subharmonic and detuned secondary instabilities. With the Grtler-vortices-distorted base flow,two classes of secondary disturbances,i.e. odd modes and even modes,are identified according to the eigenfunctions of the disturbances. These modes may result in diferent patterns in the late stages of the transition process. Li and Malik [1] have shown the sinuous and varicose types of breakdown originating from the odd and even modes. The current study focuses on the four most amplified modes termed the even modes Ⅰ Ⅱ and odd modes Ⅰ Ⅱ. Odd mode II was missing in the work of Li and Malik [1] probably due to their inviscid simplification. The detuned modes are confirmed to be less amplified than the fundamental(for the odd mode Ⅰ) and subharmonic modes(for even modes Ⅰ Ⅱ and the odd mode Ⅱ).     

ECR源的新工作模式

叙述了兰州重离子加速器ＥＣＲ２源所使用的新工作模式的条件、特点及高电荷态离子束的输出性能，给出了对该模式特点的初步分析．     

RI Beam Factory project at RIKEN

The RI Beam Factory is being proposed at RIKEN, which is a project to construct two superconducting ring cyclotrons (SRC-4 and SRC-6), experimental storage rings (MUSES) and experimental facilities. Heavy ions are to be accelerated to energies of up to 400 AMeV for light nuclei and 150 AMeV for the heaviest nuclei by the SRC-6 and up to 1400 AMeV in the MUSES. Wide varieties of radioactive nuclear beams are to be supplied as secondary beams. Electrons, stable nuclei, and highly charged ions in addition to radioactive nuclei can be stored in the storage rings. The MUSES provides various collision methods, such as colliding, merging, and internal target modes. A few of the selected new nuclear-physics opportunities are discussed briefly.     

高电荷态离子207Pb36+与金属Nb表面作用产生的二次离子产额

本文报道了利用兰州重离子加速器国家实验室的ECR离子源引出的高电荷态离子207Pb36 入射到金属Nb表面产生的二次离子的实验测量结果.实验发现,二次离子产额Y随入射初动能Ek的增加有先增加后减小的关系,在初动能为576 keV时二次离子产额达到最大.通过对实验点做高斯拟合发现,曲线峰值对应的入射初动能为602 keV.分析表明,这是势能沉积作用与线性级联碰撞过程协同作用的结果.高电荷态离子本身携带的高势能沉积在靶表面引起势能溅射,促进了二次离子的发射;而主导二次离子溅射的过程是动能溅射,它与靶表面的动量沉积(核能损)过程密切相关.     

Afterglow工作模式下ECR离子源脉冲束的产生

为满足国家大科学工程兰州重离子冷却储存环的要求,在14.5GHz ECR 离子源上进行afterglow工作模式的实验,首次产生了高电荷态脉冲束流Ar¹¹⁺和Ar¹²⁺,给出了初步实验结果,并对结果进行了分析和解释.     

具有空心阴极放电特征的射频放电的两电子组模型

 运用两电子组模型，考虑了射频放电中的α过程和γ过程两种电离机制，并结合流体模型，研究了中等气压下窄电极间隙容性耦合射频放电在运行模式转变区的等离子体密度以及电离速率分布等特性。理论研究表明，γ电离过程在高电流模式运行中起主要作用，并证实了此类放电中存在显著的电子摆钟效应，具有类似于空心阴极放电的特征。     

兰州重离子加速器冷却储存环

 兰州重离子加速器冷却储存环HIRFL-CSR,是一个多用途、多功能的双冷却储存环同步加速器系统,由主环CSRm和实验环CSRe构成,并以兰州重离子级联回旋加速器HIRFL作注入器。CSR利用高频变谐波的方法,将重离子束的能量从7～25 MeV/u同步加速到２00～1 000 MeV/u,同时利用重离子储存环中空心电子束冷却技术将束流品质提高１个数量级,并通过储存环的快引出及慢引出,提供多种类的重离子束以及放射性次级束(RIBs),以开展范围更广精度更高的物理实验。该装置于2007年投入运行,已取得了重要的运行结果,如实现了剥离注入与多圈注入、空心电子束对重离子束的冷却与累积、变谐波宽能区同步加速、等时性环型谱仪、RIBs的产生收集与ToF高分辨质量测量以及高能重离子束的变能慢引出等。     

托卡马克中宏观束-等离子体扭曲模不稳定性研究

本文主要研究了具有单一高能离子分量的托卡马克等离子体扭曲模宏观不稳定性。它基本上模拟了中性束平行注入经过电离和电荷交换后在本底等离子体中维持一个稳恒等离子体流的物理过程。高能和本底都用无碰撞的Vlasov等离子体,并取了低频、小拉莫尔半径极限。由于主要考虑束-等离子体无耗散宏观不稳定性,故可用能量原理来分析。结果表明,高能离子束对本底等离子体的外部模没有影响,只影响内部扭曲模的增长率和扰动振幅。对适当选择的速度剖面,束能够完全稳定体系n≥2,m=1模,与Dunlap线性理论结果相反而与目前实验观测一致。m/n=1/1内部扭曲模增长率在所取得模型下随注入能量β_b,注入功率P_bw,轴上安全因子q(0)和束速度的径向剖面分布参数S的不同而出现增稳、减稳及完全稳定的行为。适当选择S,在q(0)<0.924时,高能束能够稳定m/n=1/1模。 关键词：     

CSR的辐射防护

CSR(cooling storage ring)按计划将于2005年底建成调束,届时从¹²C到²³⁸U的重离子将可以分别被加速到900和400MeV的能量. HIRFL(兰州重离子加速器Heavy Ion Research Facility in Lanzhou)将 用作CSR的注入器. 为了CSR的屏蔽设计,本文利用现有的实验数据计算了由于束流损失产生的中子及其能谱、角分布,同时也估算了屏蔽体外表面的中子剂量、环境中子剂量及天空返照中子剂量. 在源项计算中使用了400MeV/u ¹²C+Cu反应的中子产额、能谱、角分布的实验数据. 计算表明, CSR对环境剂量影响最大的是天空返照中子.     

Radiation Protection of CSR

The construction of CSR (cooling storage ring) which includes a main ring (CSRm) and an experimental ring (CSRe) will be finished at the end of 2005. Heavy ions of carbon to uranium will be accelerated up to 900MeV/u and 400MeV/u at intensity of 10⁸ pps. The HIRFL (heavy ion research facility in Lanzhou) will be used as the injector. For the shielding design of CSR, the secondary neutrons due to the ion beam loss, their spectra and angular distributions were estimated based on the experimental results. The dose equivalent outside the shielding surface and in the surrounding environment and the neutron skyshine dose equivalent were also estimated in this study. The experimental result, neutron yield, spectrum and angular distribution for 400MeV/u ¹²C+Cu reaction were used for estimating the source term of shielding design. It is found that the most important environmental radiation impact component of CSR is the skyshine neutrons.     

HIAF-SRing的等时性模式光学设计

高精度环形谱仪SRing作为HIAF装置的核心之一,是获取高品质放射性次级束,并将束流用于加速器技术研究、原子物理及核物理实验的关键设备。SRing有三种运行模式:等时性模式、正常模式与内靶模式。等时性模式下,SRing运行在特殊线性光学设置下,可以精确测量寿命低至几十微秒的原子核的质量。介绍SRing等时性模式的线性光学及高阶项校正的设计方案。在使用程序GICOSY进行等时性高阶项校正数值计算后,将得到的光学传输矩阵输入到程序MOCADI进行粒子跟踪模拟。以γ_t=1.43的等时性模式为例,SRing的动量接收度为±0.20%,粒子跟踪结果显示,在仅满足一阶等时性条件时SRing的质量分辨能力R=1.6×104。在保证动量接收度不变的前提下,考虑了等时性高阶项校正后SRing的质量分辨能力提高到R=1.2×106,达到设计要求。The Spectrometer Ring, as the most important experiment terminal of the High Intensity heavy-ion Accelerator Facility (HIAF) project, is a key device to obtain high-quality radioactive ion beams (RIBs) for atomic physics, nuclear physics experiments and accelerator technology researches. Three operation modes including the isochronous mode, the normal mode and the internal target mode, have been designed for the SRing. In the isochronous mode, the SRing operates under a special ion optics and could be used for precision mass measurement of short-lived nuclei with half-life shorter than several tens of microseconds. This study aims to design the ion optics for the isochronous mode and improve the mass resolving power of the SRing with higher-order ion-optical correction scheme for isochronism while preserve a large momentum acceptance of SRing. The ion optics and the higher-order correction for the isochronous mode are calculated with the code MAD-X and GICOSY respectively. Three ion optics with γ_t=1.43, 1.67, 1.83 settings have been calculated. The code MCOADI which utilizes the matrixes generated by the code GICOSY is used for particles tracking to verify the correction results. For the ion-optical setting of γ_t=1.43 with a momentum acceptance of ±0.20%, the mass resolving power of the SRing could be improved from R=1.6×104 to R=1.2×106, after isochronous higher-order corrections.     

High frequency fast magnetoacoustic modes in the plasma core

Fast magnetoacoustic modes (FMM) [known also as compressional Alfvén eigenmodes (CAE) and magnetosonic modes] with frequencies exceeding or equal the ion gyrofrequency are considered. It is shown that edge-localized FMM, which presumably are responsible for the superthermal ion cyclotron emission (ICE) observed in many experiments on tokamaks and stellarators, represent a particular case of these modes. In general, FMMs with frequencies above/about the ion gyrofrequency have different radial locations and structures. They can extend over a large part of the plasma cross section and even can have maximum amplitudes at the magnetic axis. Modes with the same frequency and the same poloidal mode number are multiple, having different radial structures. These results are obtained in the approximation of cylindrical plasma with one-ion species.     

Acoustic modes in a dusty plasma

The propagation of the dust ion acoustic and dust acoustic modes in a dusty plasma is studied. The effect of the coupling of the charge fluctuation on the dust particles to the modes is taken into account self-consistently. It is found that the charge fluctuation leads to frequency down shift as well as dissipation of the modes. For the dust ion acoustic modes, these are significant only when the frequency characterizing the rate of capture of electrons by the dust particles in the equilibrium state is of the order of the frequency of the mode, and the mode can propagate without significant dissipation only when its frequency is well above this characteristic frequency. For the dust acoustic modes, these are significant only when the frequency characterizing the rate of capture of ions by the dust particles in the equilibrium state is of the order of the frequency of the mode, and the mode can propagate without significant dissipation only when its frequency is well above this characteristic frequency.     

The relationship between acoustic radiation modes and structural modes and its applications

Both acoustic radiation modes and structural modes play an important role in the field of structure-borne sound, however, little work has been done for inherent relations between these two kinds of modes. This paper is focused on the relationship between the radiation modes and structural modes and its physical mechanisms. First, a governing equation for relating the radiation mode and structural mode is given based on the characteristics of the modes. Then, using the symmetric or anti-symmetric properties of two kinds of modes, the corresponding relations are presented. And then, numerical examples are given to verify the theoretical investigations, and it has been shown that, for a simply supported rectangular panel vibrating at low frequencies, the first radiation mode is dominant corresponding to (odd, odd) structural modes; the following radiation modes are respectively dominant corresponding to (even, odd), (odd, even), and (even, even) structural modes. Finally, such relations are applied to active acoustic structural control and provide a direct help for the design of active control strategy and arrangement of the secondary forces.     

Obliquely propagating dust-density plasma waves in the presence of an ion beam

Self-excited dust-density waves are experimentally studied in a dusty plasma under microgravity. Two types of waves are observed: a mode inside the dust volume propagating in the direction of the ion flow and a new mode propagating obliquely at the boundary between the dusty plasma and the space-charge sheath. A model for dust-density waves propagating at an arbitrary angle with respect to the ion-flow direction is presented, which explains the preference for oblique or parallel modes as a function of ion velocity.     

对称性自发破缺所诱发的种子平行雷诺胁强

根据第二类气球模理论,在托卡马克中诸如不稳定漂移波类的环形局部模将在径向呈现源于环形性的对称性自发破缺。以流体离子温度梯度模模型方程为例,解出在准环坐标系中由对称性自发破缺产生的二维局部模本征模式。在略去边带效应后,它成为具有径向位移修正的平板模式。由位移修正离子温度梯度模式导出了种子平行雷诺胁强,而它在传统的(无位移修正的)平板模式下被证明为零。     

Sensitive analysis of metal cations in positive ion mode electrospray ionization mass spectrometry using commercial chelating agents and cationic ion-pairing reagents

Metals play a very important role in many scientific and environmental fields, and thus their detection and analysis is of great necessity. A simple and very sensitive method has been developed herein for the detection of metals in positive ion mode ESI-MS. Metal ions are positively charged, and as such they can potentially be detected in positive ion mode ESI-MS; however, their small mass-to-charge (m/z) ratio makes them fall in the low-mass region of the mass spectrum, which has the largest background noise. Therefore, their detection can become extremely difficult. A better and well-known way to detect metals by ESI-MS is by chelating them with complexation agents. In this study eleven different metals, Fe(II), Fe(III), Mg(II), Cu(II), Ru(III), Co(II), Ca(II), Ni(II), Mn(II), Sn(II), and Ag(I), were paired with two commercially available chelating agents: ethylenediaminetetraacetic acid (EDTA) and ethylenediaminedisuccinic acid (EDDS). Since negative ion mode ESI-MS has many disadvantages compared to positive ion mode ESI-MS, it would be very beneficial if these negatively charged complex ions could be detected in the positive mode. Such a method is described in this paper and it is shown to achieve much lower sensitivities. Each of the negatively charged metal complexes is paired with six cationic ion-pairing reagents. The new positively charged ternary complexes are then analyzed by ESI-MS in the positive single ion monitoring (SIM) and single reaction monitoring (SRM) modes. The results clearly revealed that the presence of the cationic reagents significantly improved the sensitivity for these analytes, often by several orders of magnitude. This novel method developed herein for the detection of metals improved the limits of detection (LODs) significantly when compared to negative ion mode ESI-MS and shows great potential in future trace studies of these and many other species.