聚对苯二甲酸丙二醇酯的无卤阻燃化改性

聚对苯二甲酸丙二醇酯作为新型聚酯材料,具有非常优良的性能,但其易燃性很大的限制了它的应用范围。为了提高对苯二甲酸乙二醇酯的阻燃性能,本文以无卤膨胀型EPFR-300A为阻燃改性剂,马来酸酐接枝聚烯烃(POE-g-MAH)弹性体为增韧剂,对聚对苯二甲酸丙二醇酯树脂(PTT)进行阻燃改性。通过热重分析仪(TGA)、示差扫描量热仪(DSC)、扫描电子显微镜(SEM)、力学性能等技术手段研究了阻燃剂和增韧剂对PTT树脂力学、热学和阻燃性能的影响。结果表明,增韧剂POE和POE-g-MAH的添加提高了PTT树脂的综合力学性能。当质量分数相同时,POE-g-MAH对PTT树脂的增韧效果要优于POE,且当POE-g-MAH质量分数为7%时,综合力学性能最佳。当添加相同质量分数增韧剂,EPFR-300A质量分数达到20%时,阻燃PTT材料阻燃性能最佳,极限氧指数(LOI)达到28.0%,垂直燃烧阻燃等级达到UL94 V-0级。EPFR-300A阻燃剂与PTT树脂间相容性良好,可以有效地促进PTT树脂成炭并提高材料的阻燃性能。     

聚碳酸酯/短切碳纤维/二苯砜磺酸钾复合材料的阻燃性能

采用熔融共混方法制备了聚碳酸酯/短切碳纤维/二苯砜磺酸钾（PC/sCF/KSS）复合材料,通过垂直燃烧（UL-94）、极限氧指数（LOI）和锥型量热测试研究了同时加入sCF和KSS对PC阻燃性能的影响。结果表明,当加入质量分数2%的sCF和质量分数0.1%的KSS时,PC/2sCF/0.1KSS复合材料的LOI较纯PC(27.2%)大幅提高,达到36.2%,UL-94等级达到V-0级。sCF和KSS在降低PC热释放和烟释放方面表现出协同效应。与纯PC相比,PC/2sCF/0.1KSS复合材料的峰值热释放速率（pHRR）降低59%,峰值烟释放速率（pSPR）降低57%,峰值CO释放速率（pCOP）降低63%,均优于单独加入sCF或KSS的样品。在燃烧过程中,sCF和KSS的同时加入在PC复合材料中发挥了优异的凝聚相阻燃作用。此外,PC/2sCF/0.1KSS复合材料的冲击强度、拉伸强度、断裂伸长率与纯PC相比变化不大,力学性能得到保持。     

协效阻燃聚丙烯的阻燃性能

本文研究了以聚磷酸铵(APP)为主阻燃剂,次磷酸铝(AHP)和三聚氰胺氰尿酸盐(MCA)为辅阻燃剂的协效阻燃体系对聚丙烯(PP)阻燃性能的影响。 采用垂直燃烧测试、极限氧指数(LOI)测试、热重分析、锥形量热仪测试、扫描电子显微镜分析等技术手段对所制备的阻燃样品进行了阻燃性能分析。 结果表明:单独添加任一质量分数30%阻燃剂,均不能使PP获得良好的阻燃性能;当阻燃剂总质量分数保持在30%,m(APP)：m(AHP)：m(MCA)=4：1：1时获得理想阻燃效果,此时阻燃PP的LOI为33%,垂直燃烧测试达到V-0级,热释放速率峰值(PHRR)从765.7 kW/m²降为122.7 kW/m²。     

膨胀型阻燃UPR复合材料的阻燃及抑烟性能

将叶蜡石(PYR)与膨胀型阻燃剂[IFR,聚磷酸铵(APP)/季戊四醇(PER)/三聚氰胺(Mel))复配],应用于不饱和聚酯树脂(UPR),得到膨胀型阻燃UPR复合材料。通过氧指数(LOI)、垂直燃烧(UL94)、烟密度等级(SDR)、热分析(DSC-TG)对阻燃复合材料的阻燃、抑烟及热稳定性能进行了研究。结果表明:在该膨胀型复配阻燃体系中,叶蜡石与IFR存在明显的协效作用,在mPYR∶mAPP∶mPER∶mMel=4∶2∶1∶1,复合阻燃剂的含量为40%的情况下,LOI高达36.4,阻燃级别为UL94 V-0级,SDR为62.95,满足国家对B1级电器类热固性塑料的使用要求。     

金属氧化物对聚丙烯膨胀阻燃体系阻燃性能的影响

将Bi2O3、Sb2O3、SnO2添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀型阻燃聚丙烯(PP)体系中,采用氧指数(OI)、热分析(TGA)、热红联用(TG-FTIR)和扫描电镜(SEM),考察它们对膨胀阻燃体系的催化协效作用,探讨其作用机理.结果表明,3种金属氧化物在适量的添加下都可以提高体系的氧指数.TG结果表明,Bi2O3的加入可以提高膨胀炭层在高温时的热稳定性,增加高温时残余物的量;TG-FTIR结果显示添加Bi2O3后,膨胀阻燃剂在热分解过程中,气体的释放过程发生了改变.膨胀炭层的SEM图表明,Bi2O3可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.0.1 wt%的Bi2O3和1 wt%的纳米黏土复配用于膨胀阻燃体系中,可以在阻燃剂添加20份下,样品氧指数达到28.3;在阻燃剂添加25时,样品(3.2 mm)通过UL-94 V-0级.0.1 wt%的Bi2O3和1 wt%纳黏粘土的添加,还可以提高体系的力学性能.     

三季戊四醇亚磷酸酯阻燃剂的合成及应用研究

以三季戊四醇(TPE)、亚磷酸三苯酯(TPP)为反应原料,氢氧化钠为催化剂,采用非溶剂酯交换一步法合成了三季戊四醇亚磷酸酯膨胀型阻燃剂。用红外光谱与元素分析初步确定了三季戊四醇亚磷酸酯类的物质。热分析表明,10％的失重所对应的温度为122℃,50％的失重对应的温度为371℃;其失重速率最大时的峰顶温度为329℃;在500℃时的成炭量高达40％。以三季戊四醇亚磷酸酯和三聚氰胺复配阻燃的环氧树脂,添加量为19％时其极限氧指数(LOI)为35％,通过了UL94V-0级,表明该阻燃剂具有优良的阻燃性能。     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

二季戊四醇磷酸酯的合成、表征及阻燃性能测试

以磷酸和季戊四醇为原料,采用直接酯化法合成阻燃剂二季戊四醇磷酸酯,对样品进行了表征,并对合成工艺及其在聚烯烃中的阻燃性能进行了研究.确定最佳合成条件:二甲苯为带水剂;反应温度180-200℃;反应时间6-7h.将此阻燃剂与聚磷酸铵按40/60(质量比)复配添加到聚烯烃中,样品比重30%时阻燃级别可达UL94V-0级.     

MgAlZnFe-CO3 LDHs对PBS膨胀阻燃体系性能的影响

采用恒定pH值共沉淀法在自制反应器中合成了不同原料配比的碳酸根型镁铝锌铁层状双羟基金属氧化物（MgAlZnFe-CO₃ LDHs）,并通过熔融共混MgAlZnFe-CO₃ LDHs、聚磷酸铵（APP）、三聚氰胺（MA）和全降解材料聚丁二酸丁二醇酯（PBS）制备出PBS膨胀阻燃材料. 采用傅里叶红外光谱（FTIR）、热失重（TG）、X射线衍射（XRD）、扫描电子显微镜（SEM）及元素分析（ICP）对MgAlZnFe-CO₃ LDHs进行了表征,并对PBS膨胀体系进行了力学性能和阻燃性能等测试. 结果表明,当Mg²⁺,Zn²⁺,Al³⁺和Fe³⁺的摩尔比为9：3：3：1时,合成的MgAlZnFe-CO₃ LDHs热稳定性最好,晶态结构规整,呈形貌规则的六边形片状;当MgAlZnFe-CO₃ LDHs的添加质量分数为1%时（阻燃剂的总添加质量分数为20%）时,PBS膨胀阻燃体系的极限氧指数（LOI）达到35%,垂直燃烧测试达到UL-94 V-0级别,力学性能得到较大改善. 实验结果表明,低添加量的MgAlZnFe-CO₃ LDHs与膨胀阻燃剂（IFR）协效阻燃PBS,一方面能够改善膨胀阻燃剂恶化PBS力学性能的现象,另一方面协同效应能够明显提高PBS的阻燃性能.     

次磷酸铝协同硼酸锌阻燃聚乙烯

以次磷酸铝(AHP)和硼酸锌(ZB)为复合阻燃剂,通过熔融共混法制备了阻燃聚乙烯(PE)材料,研究了AHP和ZB对PE的协同阻燃效应。 结果表明,AHP、ZB阻燃剂在PE基体中分散均匀;添加质量分数为25%AHP阻燃剂,PE材料的极限氧指数值(LOI)提升至25%,通过垂直燃烧测试(UL-94(3.2 mm))V-2级,显示出良好的阻燃效果;引入ZB后,材料LOI值呈先升高后下降趋势,在m(AHP):m(ZB)=21:4时,出现峰值,达到27.2%,并通过UL-94(3.2 mm)V-1级;热失重分析(TGA)结果显示,AHP、ZB阻燃剂能同时提高PE材料的热稳定性和成炭率,当m(AHP):m(ZB)=17:8时,残渣率达到25.7%。     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。