有机硅改性聚氨酯的合成与性能

在无溶剂条件下利用二步法合成了一系列氨基硅油改性聚氨酯,采用红外光谱对预聚体进行了表征,同时测试了材料的力学性能、耐热性、表面水接触角及微观形态,结果表明,改性后的聚氨酯具有优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。     

氨乙基氨丙基聚二甲基硅氧烷改性水性聚酯型聚氨酯的研究

由聚酯二元醇、异佛尔酮二异氰酸酯和二羟甲基丙酸合成聚氨酯预聚体，以氨乙基氨丙基聚二甲基硅氧(AEAPS)为扩链剂，制备了AEAPS改性聚氨酯水分散液。与未改性的聚氨酯水分散液相比，AEAPS改性聚氨酯水分散液的粒径增大，但粒径分布和表面张力基本不变，说明疏水的聚二甲基硅氧烷侧链被包裹于分散颗粒的内部；此外，改性聚氨酯水分散液的冻融稳定性显著增强。AEAPS改性聚氨酯水分散液成膜后，吸水率明显下降，水在膜表面的接触角增加，400℃时热失重下降，具有良好的疏水性和耐热性。     

氨基硅油扩链改性水性聚氨酯的合成及性能研究

采用甲苯二异氰酸酯(TDI)、聚氧化丙烯二醇(PPG)、2,2-二羟甲基丙酸(DMPA)为原料,先制备成聚氨酯预聚体,再通过在乳化过程中以侧链氨基硅油(AEAPS)或直链氨基硅油(ATPS)扩链制得了一系列水性聚氨酯乳液,并对涂膜的红外光谱、耐水性、力学性能和表面疏水性等进行了研究。结果表明,通过氨基硅油改性的聚氨酯涂膜,在保持力学性能基本不变的情况下,其耐水性、表面疏水性等性能都有明显提高。其中,侧链氨基硅油(AEAPS)比直链氨基硅油(ATPS)具有更好的改性效果。     

氨基硅油扩链改性水性聚氨酯的研究

通过将由甲苯二异氰酸酯与聚四氢呋喃,二羟甲基丙酸反应制得的聚氨酯预聚体在低浓度氨基硅油的水乳液中扩链,合成了一种硅氧烷改性的聚氨酯水乳液,并用傅立叶红外光谱,ＥＳＣＡ能谱,接触角仪,电子拉力试验机,吸水率测定及乳液稳定性测试对其进行研究。     

氨乙基氨丙基聚二甲基硅氧烷改性聚氨酯的研究

在无溶剂条件下合成了一系列氨基硅油改性聚氨酯,并对材料的力学性能、耐热性、疏水性及微观形态进行了研究。结果表明：改性后的聚氨酯具有更优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。     

有机硅/蒙脱土复合改性聚氨酯弹性体的制备和性能

采用先将聚醚三元醇N330与有机蒙脱土(OMMT)研磨,制得N330/OMMT复合物,再将其与有机硅改性聚氨酯的预聚体混合的方法,以二甲硫基甲苯二胺(DMTDA)为固化剂,制备了有机硅/蒙脱土复合改性聚氨酯弹性体,并用FTIR对产物结构进行了表征.XRD和TEM表明,蒙脱土片层被撑开,并分散在基体中;SEM显示,加入蒙脱土后,有机硅与聚氨酯之间的相容性提高;TGA表明,有机硅和OMMT共同改性聚氨酯后,其耐热性比有机硅单一改性聚氨酯有所提高,并在OMMT含量为5 wt％时提高最大;DSC数据表明,在OMMT含量为5 wt％时,有机硅/蒙脱土复合改性聚氨酯弹性体的Tg明显升高.复合改性材料具有良好的表面性能和力学性能,其拉伸强度、断裂伸长率和硬度在OMMT含量为3 wt％时达到最大值.     

氨基硅油改性碳纤维/环氧树脂复合材料的耐老化性能

通过在复合树脂基体中引入氨基硅油进行改性,制备了不同氨基硅油含量的碳纤维/环氧树脂复合材料,在湿热环境下进行老化实验后,通过动态热机械分析(DMA)、热重分析(TGA)、拉伸性能测试、扫描电镜(SEM)及接触角测定等方法研究氨基硅油对于碳纤维/环氧树脂复合材料热力学性能、力学强度保持率和耐水性能的改善效果。实验结果表明,经老化实验后含氨基硅油材料的抗拉强度保持率最高提升了13.23%。当氨基硅油含量为8 wt%时,复合材料表面接触角均值大于90~o。氨基硅油对环氧树脂基体的改性可改善碳纤维/环氧树脂复合材料的耐湿热老化性能。     

聚甲基戊烯膜式氧合器表面碳酸酐酶的固定化及性能研究

聚甲基戊烯(PMP)膜式氧合器表面先用水等离子体改性,以引入羟基官能团;再以溴化氰为偶联剂,将碳酸酐酶(CA)偶联至其表面.改性后用X射线光电子能谱(XPS)、表面接触角及酶活性测定等方法研究PMP表面性能变化.结果表明,等离子体处理后,在PMP表面引入了大量的含氧官能团,与水的表面接触角从103.37°降低至50.01°.再将CA引入PMP表面后,与水的表面接触角进一步降低至39.23°;XPS的C1谱图中出现蛋白质的特征峰;以对硝基苯酚乙酸酯为底物,测得表面接枝CA的活性达到理论单分子层接枝活性的73%.改性后PMP表面物理化学性质的变化证明本文方法确实能成功地将羟基官能团、CA引入其表面.本方法有望应用在膜式氧合器上以提高其清除血液中CO2的能力.     

新型改性聚己内酯型聚氨酯弹性体的合成及性能

用不同种类异氰酸酯[脂肪族六亚甲基二异氰酸酯(HDI)和脂环族异佛尔酮二异氰酸酯(IPDI)]对聚己内酯(PCL)进行改性,得到两端为羟基的异氰酸酯改性的PCL预聚体.将未改性和改性的PCL端羟基进行磷酸化后[磷酸化组分PCL210磷酸酯(A)、PCL205/HDI磷酸酯(B)和PCL205/IPDI磷酸酯(C)]与双官能度的环氧(1,4-丁二醇二缩水甘油醚,E)进行开环交联反应,得到生物相容且可降解的聚己内酯型聚氨酯弹性体材料(AE,BE和CE).聚己内酯型聚氨酶弹性体的力学性能、静态水接触角、体外降解/溶胀和细胞毒性测试结果表明,PCL异氰酸酯的改性有助于提高材料的强度、弹性、耐疲劳性和降解速率,同时未明显提高材料的细胞毒性.     

聚羟基脂肪酸酯的亲水性改性及其与人脐静脉内皮细胞相容性的研究

用丝素蛋白(SF)对微生物合成的高分子聚合物聚(3-羟基丁酸酯-co-3-羟基己酸酯)(PHBHHx)进行亲水改性,以提高材料的生物相容性.水接触角测定和表面自由能分析表明,丝素蛋白在支架表面吸附,使PHBHHx材料表面的水接触角从90°降至51°,表面自由能从37.9 mJ/m2增至57.4 mJ/m2,因而增加了材料的亲水性.进一步对亲水性改性前后PHBHHx多孔支架与人脐静脉内皮细胞(HUVECs)的相容性进行了比较.MTT法细胞活力分析表明,细胞在支架上培养3,5,7天后,其在SF改性PHBHHx多孔支架上的活力显著高于在未改性的PHBHHx支架上的活力;扫描电镜观察细胞生长形貌表明,细胞在改性后多孔支架上黏附及生长5天后,形成了连续细胞单层,其生长状态优于在未改性的PHBHHx支架上的生长状态;胶原含量测定表明细胞在改性后支架上比在未改性支架上有更好的胶原分泌能力,即改性后支架更利于诱导HUVECs分泌细胞外基质(ECM)从而构建类似体内的生长环境.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.