Confinement effect of SiO2 framework on phase change of PEG in shape-stabilized PEG/SiO2 composites

PEG/SiO₂ shape-stabilized phase change materials with various mass fractions and molecular weights of PEG were prepared by the sol–gel method. Polyethylene glycol (PEG) and tetraethyl orthosilicate (TEOS) were chosen as the phase change substance and the silica framework precursor, respectively. The as-prepared samples were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM) techniques. It is shown that the silica framework strongly confined the crystallization of PEG. The crystallinity and thermodynamic performance of the composites were undesirable for PEG with molecular weight of 1500 even when the PEG content reached 80 wt%. The crystallinity and thermodynamic performances of the PEG/SiO₂ composites first decline then improve with the increase of the PEG molecular weights, owing to the different confinement behaviors of the silica framework. Finally, we investigated the phase change mechanism of the PEG/SiO₂ composites under the different confinement of the silica framework.     

Graphene oxide stabilized polyethylene glycol for heat storage

Graphene oxide (GO) sheets were introduced to stabilize the melted polyethylene glycol (PEG) during the solid-liquid phase change process, which can be used as a smart heat storage system. The structural properties and phase change behaviors of the PEG-GO composites were comprehensively investigated as a function of the PEG content by means of various characterization techniques. The highest stabilized PEG content is 90 wt% in the composites, resulting in a heat storage capacity of 156.9 J g(-1), 93.9% of the phase change enthalpy of pure PEG. Notably, GO has much stronger impact on lowering of the phase change temperature of PEG compared with some other porous carbon materials (activated carbon and ordered mesoporous carbon) due to the unique thin layer structure of GO. Because of the high heat storage capacity and the moderate phase change temperature, the PEG-GO composite is a promising heat energy storage candidate at mild temperature.     

Synthesis of the polyethylene glycol solid-solid phase change materials with a functionalized graphene oxide for thermal energy storage

Polyethylene glycol (PEG) as a phase change material possesses three obstacles, such as leakage, low thermal conductivity and low thermal stability. A novel solid-solid phase change material (PCM) based on functionalized graphene oxide (GO), Polyethylene glycol (PEG) was prepared, and the three obstacles of PEG as a PCM was solved in one and the same material. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman and Transmission electron microscope (TEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and thermogravimetric analysis/infrared spectrometry (TG-IR) were used to study the properties of supporting material and composite PCM (CPCM). The results indicated that the PEG was grafted on the surface of the supporting material; Compared with pure PEG, the latent heat of CPCM with 9.6 wt% supporting material decreased only 5.3%, however, the thermal conductivity of CPCM increased 111% and the heat peak release rate of CPCM decreased 33.4%.     

聚乙二醇/氮化硼复合材料相变导热性能及其结晶行为

本文采用熔融共混浇筑的方法制备了聚乙二醇/氮化硼(PEG/BN)相变复合材料,并研究了不同尺度片状BN对相变复合材料导热性能和结晶行为的影响。 通过扫描电子显微镜(SEM)、热常数分析仪、红外热成像分析仪和差示扫描量热仪(DSC)研究了相变复合材料的微观形貌、导热系数和相变过程,并利用莫志深法对DSC结果进行了非等温结晶动力学分析。 结果表明,较大片状直径(50 μm)的BN可以更有效地提高聚乙二醇的导热系数,当BN填料质量分数为40%时,相变复合材料的导热系数可达到5.04 W/(m·K)。 在快速降温条件下,片径为50 μm的BN填料可以缩短PEG的半结晶时间,提高结晶速率,使相变复合材料具有较大的相变焓。     

水性聚氨酯相变储能材料的相变机理

以聚乙二醇(PEG)为软段、六亚甲基二异氰酸酯-1,4-丁二醇-二羟甲基丙酸(HDI-BDO-DMPA)为硬段,制备了一系列水性聚氨酯相变储能材料(WPUPCM)。在相变过程中,由于软段PEG由聚合前的固-液相变转化为聚合后的固-固相变,因此,所制备的WPUPCM表现出固-固相变特性。为了研究其固态相变行为的本质和形成机理,揭示该类聚合物的能量贮存和转换机理,应用偏光显微镜、扫描电镜、原子力显微镜、X射线衍射仪分析研究了PEG、WPUPCM在相变过程中的晶体结构变化特征,讨论了WPUPCM固-固相转变的机理。     

Temperature‐dependent phase‐segregation behavior and antifouling performance of UV‐curable methacrylated PDMS/PEG coatings

Controllable phase segregation adjustment for immiscible polymer blends has always been tough, which hinders the development of amphiphilic antifouling coatings from more accessible blends. Herein, methacrylated poly(dimethylsiloxane) (PDMS‐MA) was synthesized and mixed with poly(ethylene glycol)methylether methacrylate (PEG‐MA). It was interestingly discovered that these PDMS‐MA/PEG‐MA blends displayed upper critical solution temperatures (UCST) due to thermo‐induced conformational change of PEG‐MA and the UCST changed with PDMS‐MA/PEG‐MA mass ratios. Micro‐/nano‐phase segregation, nanophase segregation, or homogenous morphology were therefore achieved. These PDMS‐MA/PEG‐MA blends with different mass ratios were UV‐cured under varying temperatures to fabricate coatings. Their surface morphology and wettability are readily adjusted by phase segregation. For the first time, highly hydrophilic surface was achieved for coatings with microphase segregation because of the exposure of PEG‐rich domains, which exhibited an enhanced protein resistance against bovine serum albumin (BSA). Anti‐bacterial performance (Shewanella loihica) was also observed for these PDMS/PEG coatings. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1612–1623     

Synthesis and characterization of an environmentally friendly PHBV/PEG copolymer network as a phase change material

Novel environmentally friendly poly(hydroxybutyrate-co-hydroxyvalerate) and poly(ethylene glycol) (PHBV/PEG) copolymer networks were synthesized through free-radical solution polymerization with PHBV diacrylate (PHBVDA) and polyethylene glycol diacrylate (PEGDA) as macromers. The molecular structure of PHBV/PEG copolymer network was characterized by Fourier transform infrared (FT-IR) and ¹H nuclear magnetic resonance (¹H NMR). The morphology of the PHBV/PEG copolymer network was characterized by polarization optical microscopy. Thermal energy storage properties, thermal reliability and thermal stability were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis. The results indicated that the PHBV/PEG copolymer network hindered the growth of PEG crystalline segments or PHBV segments. PHBV/PEG copolymer network had a higher latent heat enthalpy, which didn’t reduce with the components of PHBV increased. Moreover, PHBV/PEG copolymer network still had good thermal stability even at 300 °C. These results suggested that such environmentally friendly copolymer network would have wide applications in phase change energy storage materials.     

Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

The development and the application of phase change materials (PCMs) as a new kind of materials have attracted both scientific and industrial interest1-4. According to the patterns of phase conversion, commonly PCMs are divided into solid-liquid phase cha…     

Pressurized liquid extraction with in-cell clean-up followed by gas chromatography-tandem mass spectrometry for the selective determination of parabens and triclosan in indoor dust

This work studied the possibility of using polyethyleimine (PEI) as an affinity ligand for the purification of plasmid DNA (pDNA) from alkaline lysates using aqueous two-phase systems (ATPSs). The goal was to find conditions under which this cationic polymer could steer the partition of pDNA to the phase where less impurities accumulate. In poly(ethylene glycol) (PEG)/ammonium sulphate systems, neither free nor PEGylated PEI (pPEI) were able to change the partition of pDNA. This is probably due to the high salt concentration present in these systems that impair the interaction between pDNA and PEI. In PEG 3350/dextran 110 systems, the desired effect could be observed but 0.2-0.5M ammonium sulphate had to be added to prevent the co-partition of RNA to the same phase. These results were used to develop a methodology to obtain polyplexes from alkaline lysates in a two-step ATPSs extraction process. In the first step, a PEG 600/ammonium sulphate system is used to remove most impurities to the top phase. The pDNA-containing bottom phase is then isolated and contacted with a second PEG 3350/dextran 110 system supplemented with a small amount of pPEI (0.2%). Plasmid yield was 100% and the final preparation had no RNA and only small amounts of contaminant protein. Additionally, pDNA was obtained in the form of 53nm-sized polyplexes which are likely to suit specific gene delivery applications.     

Influence of poly(ethylene glycol) on the partition of a charged spin probe

The influence of poly(ethylene glycol) on the partition of a charged long chain spin probe between membranes and an external phase is studied. The partition coefficient is derived from the ESR spectra. Membranes of different properties are used (egg lecithin liposomes, erythrocytes) to differentiate between the influence of the external phase and the specific properties of the membrane.The partition coefficient is decreased in an exponential manner on increasing the PEG concentration, which indicates a lowering of the thermodynamic stability of the membranes. The determination of the change in the difference of the chemical potential is dependent on the PEG concentration.The membrane destabilization induced by PEG is caused in an indirect manner by a change of the chemical potential difference as result of the changed water structure and the osmotic pressure, surface tension and hydration of the membrane. This destabilization could be connected with the high fusogenic activity of PEG.     

Phase-mixed poly(ethylene glycol)/poly(trimethylolpropane triacrylate) semi-interpenetrating polymer networks obtained by rapid network formation

Semi-interpenetrating polymer networks (semi-IPNs) of poly(ethylene glycol) (PEG) in poly(trimethylolpropane triacrylate) (TMPTA) were synthesized from PEG melts in neat TMPTA monomer, using PEG of molecular weights from 4000 to 100,000 g/mol. Differential scanning calorimetry and transmission electron microscopy were used to examine phase separation occurring during network formation. The degree of phase separation was observed to depend upon the rate of PEG aggregation relative to the rate of network formation during TMPTA polymerization. Higher molecular weight PEG and acrylate-functionalized PEG formed more phase-mixed networks compared to lower molecular weight PEG; acetatefunctionalized PEG showed no difference from unmodified PEG in the extent of phase mixing. For networks that demonstrated phase separation, the PEG was observed to be in two states: some being phase mixed and solvent inextractable, and some being phase separated and solvent extractable. Phase-mixed networks could be obtained from this thermodynamically incompatible polymer pair utilizing rapid photopolymerization systems to overcome PEG phase aggregation and kinetically entrap the PEG in a nonequilibrium phase-mixed state. These mixed-phase semi-IPNs of PEG and TMPTA may be useful in biological applications where the presence of PEG is desired throughout the bulk matrix rather than as a surface graft to reduce biological interactions. © 1994 John Wiley & Sons, Inc.     

Tracking of the effects of the plasticizer on the water uptake and free volume changes of methylcellulose

The structural changes in methylcellulose containing poly(ethylene glycol) (PEG 400) as plasticizer caused by water absorption during storage were evaluated. In order to elucidate the structural changes in the polymer, water‐uptake measurements and positron annihilation lifetime spectroscopy (PALS) were utilized. The PEG concentrations relative to the total polymer content were varied within the range 0–75% w/w. The Doppler‐spectra were characterized by means of the conventional parameters S and W. A transition from a single phase to two phases was found in the methylcellulose films above PEG; a content of 33% w/w. The first step of ageing is merely a conformational change, after which the electron structure remains more or less the same, while both S and W indicate significant changes during the second slow step of ageing. Accurate determination of the plasticizer concentration relating to the single‐phase to two‐phase transition of Metolose‐PEG films has a great impact from the aspect of the application of a stable composition for coating of solid dosage forms. Copyright © 2007 John Wiley & Sons, Ltd.     

热致相分离法制备微孔EVAL中空纤维膜的探索

比较了羟基含量不同的两种乙烯－醋酸乙烯酯共聚物（EVA）的醇解产物和聚乙二醇组成的两元体系的相图的差异，在此基础上，以聚乙二醇为稀释剂，采用了热致相分离方法制备了微孔EVA的醇解产物中空纤维膜。结果表明纺丝时的冷却水溶温度、稀释剂的抽提温度以及EVA的醇解产物与聚乙二醇的比例对微孔中空纤维的透气性有明显的影响。     

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide),PEG-b-(PNIPAM)_2,were successfully synthesized through atom transfer radical polymerization(ATRP).A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether(PEG).The copolymers were obtained via the ATRP of N-isopropylacrylamide(NIPAM) at 30℃with CuCl/Me_6TREN as a catalyst system and DMF/H_2O(v/v = 3:1) mixture as solvent.The resulting copo...     

Phase behavior,crystallization, and morphology in thermosetting blends of a biodegradable poly(ethylene glycol)‐type epoxy resin and poly(ϵ‐caprolactone)

Thermosetting blends of a biodegradable poly(ethylene glycol)‐type epoxy resin (PEG‐ER) and poly(?‐caprolactone) (PCL) were prepared via an in situ curing reaction of poly(ethylene glycol) diglycidyl ether (PEGDGE) and maleic anhydride (MAH) in the presence of PCL. The miscibility, phase behavior, crystallization, and morphology of these blends were investigated. The uncured PCL/PEGDGE blends were miscible, mainly because of the entropic contribution, as the molecular weight of PEGDGE was very low. The crystallization and melting behavior of both PCL and the poly(ethylene glycol) (PEG) segment of PEGDGE were less affected in the uncured PCL/PEGDGE blends because of the very close glass‐transition temperatures of PCL and PEGDGE. However, the cured PCL/PEG‐ER blends were immiscible and exhibited two separate glass transitions, as revealed by differential scanning calorimetry and dynamic mechanical analysis. There existed two phases in the cured PCL/PEG‐ER blends, that is, a PCL‐rich phase and a PEG‐ER crosslinked phase composed of an MAH‐cured PEGDGE network. The crystallization of PCL was slightly enhanced in the cured blends because of the phase‐separated nature; meanwhile, the PEG segment was highly restricted in the crosslinked network and was noncrystallizable in the cured blends. The phase structure and morphology of the cured PCL/PEG‐ER blends were examined with scanning electron microscopy; a variety of phase morphologies were observed that depended on the blend composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2833–2843, 2004     

MWCNTs/hydroxypropyl cellulose/polyethylene glycol-based shape-stabilized phase change materials

Journal of Thermal Analysis and Calorimetry - Polyethylene glycol (PEG) is widely used as phase change materials (PCMs). However, the leakage and low thermal conductivity issues restrict its...     

Fractional crystallization behavior of PCL and PEG in blends

The crystallization behavior of poly(e-caprolactone)/poly(ethylene glycol) (PCL/PEG) blend was investigated by differential scanning calorimetry (DSC) and polarized microscopy (POM). Individual phase transition peaks in the DSC curves for both PEG and PCL in all the polymer blends with different PCL contents were observed. The crystallization and melting peak temperatures of PEG were at 41 and 65°C, respectively; while the crystallization and melting temperatures of PCL located at 28 and 56°C, respectively. In-situ POM results demonstrated that spherulites crystalline morphology was formed for both PCL and PEG homopolymers. In PEG/PCL blend, however, both the phase separation morphology and spherulitic morphology can be observed. In blends with 30 or 50 wt % PCL, the PCL component formed dispersed phase and crystallized at lower temperature. However, in blends with 70% PCL, the phase inversion behavior occurred. The continuous PCL phase crystallized at 35°C, while the PEG dispersed phase crystallized at a lower temperature. Fractional crystallization behavior of PEG and PCL was controlled by temperature. The spherulites growth rate of PEG was greatly influenced by temperature, instead of the content of PCL component in the PCL/PEG blends.     

Exploitation of the coil-globule plasmid DNA transition induced by small changes in temperature, pH salt, and poly(ethylene glycol) compositions for directed partitioning in aqueous two-phase systems

In this study, the interplay of two linked equilibria is examined, one concerning an aqueous two-phase system (ATPS) composed of poly(ethylene glycol) (PEG) and salt employed to partition plasmid DNA (pDNA), and the other a potential structural transition of pDNA depending on PEG and salt concentration and other system parameters. The boundary conditions for pDNA partitioning are set by PEG and salt concentrations, PEG molecular weight, pH, and temperature. While investigating these parameters, it was found that a small increase/decrease of the respective values led to a drastic and significant change in pDNA behavior. This behavior could be attributed to a coil-globule transition of the pDNA triggered by the respective phase conditions. The combination of this structural change, aggregation effects linked to the transition process, and the electrostatic potential difference found in PEG-salt systems thus offers a sensitive way to separate nucleic acid forms on the basis of their unique property to undergo coil-globule transitions under distinct system properties.     

Partitioning of lactate dehydrogenase from bovine heart crude extract by polyethylene glycol-citrate aqueous two-phase systems

Aqueous two-phase systems (ATPS) composed of polyethylene glycol (PEG)-citrate have been used for enzyme partitioning studies. The behavior of lactate dehydrogenase (LDH) from bovine heart crude extract was analyzed using a two-level factorial design in which the PEG molar mass and concentration, the citrate concentration were selected as independent variables, while the purification factor, the partition coefficient (K) and the activity yield were selected as responses. The statistical analysis revealed the effect of PEG molar mass on K. LDH exhibited a better partitioning toward PEG-rich phase and the highest K value (1079.81) was obtained with 42% (w/w) PEG 400 and 7.5% (w/w) citrate concentration. PEG molar mass also influenced the purification factor of the enzyme in the top phase. Possibly these ATPS remove inhibitors present in the extract affording higher enzyme yield.