Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend

The mechanical, thermal and biodegradable properties of poly(d,l-lactide) (PDLLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ethylene glycol) (PEG) blends were studied. The influence of PEG on the tensile and impact strengths of the blends was investigated. The results showed that the toughness and elongation at break of the PDLLA/PHBV (70/30) blends were greatly improved by the addition of PEG, and the notched Izod impact strength increased about 400% and the elongation at break increased from 2.1% to 237.0%. The thermal and degradation properties of the blends were investigated by differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA), it was found that the thermal stability of PHBV in the presence of PDLLA was improved. The degradation test showed that the addition of PEG could notably accelerate the biodegradation of the blends in the soil at room temperature, and the mass loss is about 20% after 30 days of the storage.     

The stability of semi-interpenetrating polymer networks based on sulfonated polyimide and poly(ethylene glycol) diacrylate for fuel cell applications

A series of the semi-interpenetrating polymer network (semi-IPN) membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and characterized comparing with pure sulfonated polyimide membrane and commercially available membrane, Nafion^® 117. The proton conductivity increased with the increase of poly(ethylene glycol) diacrylate contents in spite of the decrease in ion exchange capacity which is a key factor to improve the proton conductivity. The water stability of semi-IPN membranes containing poly(ethylene glycol) diacrylate is higher than the pure sulfonated polyimide membrane. Morphological structure showed that amorphous nature of the films also increased with the poly(ethylene glycol) diacrylate contents, which could make a crosslink, so that the crystallinity of polyimide could disappear. Semi-IPN membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate, which show good conductivity comparable to Nafion^® 117 in the range of 20-50% content of poly(ethylene glycol) diacrylate, could be promising proton conducting membranes in fuel cell application.     

Synthesis and characterization of aba-type block copolymer of poly(ϵ-caproplactone) with poly(ethylene glycol), by mean of activation end groups

Poly(?-caprolactone)-b-poly(ethylene glycol)-b-poly(?-caprolactone) (PCL-b-PEG-b-PCL) triblock copolymer were synthesized by mean anionic activation of the hydroxyl end groups of poly(ethylene glycol) in presence of diphenylmethylsodium. Copolymers were characterized by SEC, FT-IR and ¹H-NMR spectroscopy, TGA and DSC. Size exclusion chromatographic analysis of obtained copolymers indicated incorporation of CL monomer into PEG without formation of PCL homopolymer. Characterization by FT-IR and ¹H NMR spectroscopy of the resulting polymeric products, with respect to their structure, end-groups and composition, showed that they are best described as ester-ether-ester triblock copolymers, whose compositions can be adjusted changing the feeding molar ratio of PEG to CL. The thermal stability of triblock copolymers was less that PEG precursor, but higher that PCL homopolymer. Analysis by mean DSC showed that all copolymers were semi-crystalline and their thermal behavior depending on their composition.     

Thermal stability of copolymer derived from l-lactic acid and poly(tetramethylene) glycol through direct polycondensation

The thermogravimetric analysis (TG) of triblock copolymers (PLAG) based on poly(l-lactic acid) (PLLA) and poly(tetramethylene) glycol (PTMEG) segments with different PTMEG content and catalyst concentration was conducted. The thermal degradation behaviors of copolymers were determined by thermogravimetric analysis and the results are also confirmed by hydrogen nuclear magnetic resonance spectrometry (¹H NMR). The thermal stability of PLA-based copolymer is improved with decreasing use level of Sn catalyst and short-chain molecules with hydroxyl and carboxyl end group also have a significant effect on the thermal degradation of chain-extended products of copolymer (PLAE). PLAE-10 with 0.5 wt% catalyst shows two main decomposition kinetic mechanisms. On the other hand, PLAE-10 with 0.05 wt% catalyst mainly undergoes Sn-catalyzed selective depolymerisation. Moreover, the PTMEG segments in PLAEs seem to increase the mobility of the Sn salt moiety in PLAEs and the activation energy (E _a) decreases with increasing the PTMEG content in PLAEs.     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.     

Synthesis and characterization of poly(DTC‐b‐PEG‐b‐DTC) triblock and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) pentablock copolymers and kinetics of the polymerization

Dihydroxyl capped biodegradable poly(DTC‐b‐PEG‐b‐DTC) (BCB) triblock copolymer and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) (ABCBA) pentablock copolymer have been synthesized by PEG and BCB copolymer as macroinitiator in the presence of yttrium tris(2,6‐di‐tert‐butyl‐4‐methylphenolate). The copolymers without random segments have been thoroughly characterized by ¹H, ¹³C‐NMR, SEC, and DSC. Molecular weights of the obtained copolymers are dependent on the amount of PEGs and coincide with the theoretical values. The exchange reaction of yttrium alkoxide and hydroxyl end group is essential for controlling the products' molecular weight. Their thermal behaviors are relevant to the chain lengths of PEG and PDTC segments. The Monte Carlo method has been developed to estimate the chain propagation constant and exchange reaction constant. In average, one exchange reaction will occur after approximately six monomer molecules insert into the growing chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1787–1796, 2005     

Thermal properties of amphiphilic biodegradable triblock copolymer of <Emphasis Type="SmallCaps">l</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide and ethylene glycol

Samples of poly(l,l-lactide)-block-poly(ethylene glycol)-block-poly(l,l-lactide) (PLLA-PEG-PLLA) were synthesized from l,l-lactide polymerization using stannous 2-ethylhexanoate, Sn(Oct)₂ as initiator and di-hydroxy-terminated poly(ethylene glycol) (PEG) (M _n  = 4000 g mol⁻¹) as co-initiator. The chemical linkage between the PEG segment and the PLA segments was characterized by Fourier transform infrared spectroscopy (FTIR). Thermogravimetry analysis (TG) revealed the copolymers composition and was capable to show the deleterious effect of an excess of Sn(Oct)₂ in the polymer thermal stability, while Differential Scanning Calorimetry (DSC) allowed the observation of the miscibility between the PLLA and PEG segments in the different copolymers.     

Structure and properties of new polyester elastomers composed of poly(trimethylene terephthalate) and poly(ethylene oxide)

Series of PTT-b-PEO copolymers with different composition of rigid PTT and PEO flexible segments were synthesized from dimethyl terephthalate (DMT), 1,3-propanediol (PDO), poly(ethylene glycol) (PEG, M_n = 1000 g/mol) in a two stage process involving transesterification and polycondensation in the melt. The weight fraction of flexible segments was varied between 20 and 70 wt%. The molecular structure of synthesized copolymers was confirmed by ¹H NMR and ¹³C NMR spectroscopy. The superstructure of these polymers was characterized by DSC, DMTA, WAXS and SAXS measurements. It was observed that domains of three types can exist in PTT-b-PEOT copolymers: semi-crystalline PTT, amorphous PEO rich phase (amorphous PEO/PTT blended phase) and semi-crystalline PEO phase. Semi-crystalline PEO phase was observed only at temperature below 0 °C for sample containing the highest concentration of PEO segment. The phase structure, thermal and mechanical properties are effected by copolymer composition. The copolymers containing 30÷70 wt% of PEO segment posses good thermoplastic elastomers properties with high thermal stability. Hardness and tensile strength rise with increase of PTT content in copolymers.     

Biodegradable star-shaped poly(ethylene glycol)-poly(β-amino ester) cationic pH/temperature-sensitive copolymer hydrogels

Biodegradable star-shaped copolymers comprised of four-arm poly(ethylene glycol) (4-arm PEG) and poly(β-amino ester) (PAE) were synthesized by conjugating PAE to 4-arm PEG. The synthesized copolymers were characterized by ¹H and ¹³C NMR and gel permeation chromatography. The PAE showed pH/temperature-sensitive properties in an aqueous solution. The copolymer solutions (30 wt.%) showed a gel-to-sol phase transition as a function of temperature in the pH range 7.2–7.8. The gel window covers the physiological conditions (37 °C and pH 7.4) and can be controlled by varying the PAE block length, copolymer solution concentration and PEG molecular weight. After a subcutaneous injection of the copolymer solution into a SD rat, a gel formed rapidly in situ which remained for more than 2 weeks in the body. This copolymer is expected to be a potential candidate for biomedical applications.     

New potentially environmentally friendly copolymer of styrene and maleic acid—castor oil monoester

The maleic acid‐castor oil monoester (MACO) was synthesized and was used as monomer to synthesize a new potentially environmentally friendly copolymer of styrene and MACO (poly‐St/MACO) by suspension polymerization. Under the appropriate conditions, the poly‐St/MACO with yield of 81%, number average molecular weight of 44100 g/mol, and molecular weight distribution of 1.5 could be obtained. The chemical structures of the MACO and resulting copolymer were confirmed by Mass Spectrometry Infrared Spectroscopy and Nuclear Magnetic Resonance Spectroscopy H[1]. The results of thermogravimetric analysis and biodegradation test showed the poly‐St/MACO can be used as a new potentially environmentally friendly material with excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Synthesis of poly(p-dioxanone)-based block copolymers in supercritical carbon dioxide

Poly(p-dioxanone)–poly(ethylene glycol)–poly(p-dioxanone) triblock copolymers (PPDO–PEG–PPDO) were first synthesized by suspension ring-opening polymerization (ROP) of p-dioxanone (PDO) in supercritical carbon dioxide (scCO₂) using different molecular weights (2–10 K) of poly(ethylene glycol) (PEG) as macroinitiators. White and fine flow powders were successfully obtained when the molecular weight of PEG was below 6 K and its feed content below 20 wt.%. The ¹H nuclear magnetic resonance (NMR) result indicated the formation of PPDO–PEG–PPDO block structure even in a confined polymerized environment of particles. All the powderous samples contained irregular shaped particles that were observed by scanning electron microscope (SEM). Except for the copolymer with 10 wt.% PEG10K feed content, the mean particle sizes of other powderous samples showed identical values close to 15 μm. This fact was in agreement with the crystallinity of PPDO in the copolymers measured by differential scanning calorimetry (DSC). The water absorption of these copolymers was also measured, and as compared with PPDO homopolymer, the introduction of PEG increased the water absorption of the copolymers. The green and environmentally friendly method disclosed in this work is attractive to directly synthesize biodegradable polymeric particles with potential biomedical applications.     

A facile approach to biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-based polyurethanes containing pendant amino groups

A novel biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-based polyurethanes (PCL-PEG-PU) with pendant amino groups was synthesized by direct coupling of PEG ester of NH₂-protected-(aspartic acid) (PEG-Asp-PEG diols) and poly(ε-caprolactone) (PCL) diols with hexamethylene dissocyanate (HDI) under mild reaction conditions and by subsequent deprotection of benzyloxycarbonyl (Cbz) groups. GPC, ¹H NMR, and ¹³C NMR studies confirmed the polymer structures and the complete deprotection. DSC and WXRD results indicated that the crystallinity of the copolymer was enhanced with increasing PCL diols in the copolymer. The content of amino group in the polymer could be adjusted by changing the molar ratio of PEG-Asp-PEG diols to PCL diols. Thus the results of this study provide a good way to prepare polyurethanes bearing hydrophilic PEG segments and reactive amino groups without complicated synthesis.     

Supramolecular micellization and pH‐inducible gelation of a hydrophilic block copolymer by block‐specific threading of α‐cyclodextrin

A poly(ethylene glycol)‐b‐poly(L ‐lysine) diblock copolymer (PEG‐b‐PLL) was synthesized. Micellization of this hydrophilic copolymer due to the block‐specific threading of α‐cyclodextrin (α‐CD) molecules onto the polyethylene glycol (PEG) block yielded supramolecular‐structured nanoparticles, which undergoes pH‐inducible gelation in aqueous media. The pH‐inducible gelation of supramolecular micelle in water appeared to be completely reversible upon pH changes. The synergetic effect of selective complexation between PEG block and α‐CD and the pH‐inducible hydrophobic interaction between PLL blocks at pH 10 was believed to be the driving force for the formation of the supramolecular hydrogel. ¹H NMR and wide angle X‐ray diffraction (WAXD) were employed to confirm the inclusion complexation between α‐CD and PEG block. Meanwhile, the morphology of the micellized nanoparticles was investigated by transmission electron microscopy (TEM). The thermal stability of inclusion complexes (ICs) was investigated and the rheologic experiment was conducted to reveal the micelle‐gel transition. Such pH‐induced reversible micelle‐gel transition of the supramolecular aggregates may find applications in several fields, for example as advanced biomedical material possessing stimulus‐responsiveness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 782–790, 2008     

Solid polymer electrolytes III: Preparation,characterization, and ionic conductivity of new gelled polymer electrolytes based on segmented,perfluoropolyether‐modified polyurethane

New segmented polyurethanes with perfluoropolyether (PFPE) and poly(ethylene oxide) blocks were synthesized from a fluorinated macrodiol mixed with poly(ethylene glycol) (PEG) in different ratios as a soft segment, 2,4‐toluene diisocyanate as a hard segment, and ethylene glycol as a chain extender. Fourier transform infrared, NMR, and thermal analysis [differential scanning calorimetry and thermogravimetric analysis (TGA)] were used to characterize the structures of these copolymers. The copolymer films were immersed in a liquid electrolyte (1 M LiClO₄/propylene carbonate) to form gel‐type electrolytes. The ionic conductivities of these polymer electrolytes were investigated through changes in the copolymer composition and content of the liquid electrolyte. The relative molar ratio of PFPE and PEG in the copolymer played an important role in the conductivity and the capacity to retain the liquid electrolyte solution. The copolymer with a 50/50 PFPE/PEG ratio, having the lowest decomposition temperature shown by TGA, exhibited the highest ionic conductivity and lowest activation energy for ion transportation. The conductivities of these systems were about 10^?3 S cm^?1 at room temperature and 10^?2 S cm^?1 at 70 °C; the films immersed in the liquid electrolyte with an increase of 70 wt % were homogenous with good mechanical properties. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 486–495, 2002; DOI 10.1002/pola.10119     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

A water-soluble PPDO/PEG alternating multiblock copolymer: Synthesis, characterization, and its gel-sol transition behavior

Biodegradable and nontoxic alternating multiblock copolymers based on poly (p-dioxanone) (PPDO) and poly (ethylene glycol) (PEG) were synthesized by the coupling reaction of two bifunctional prepolymers, a dihydroxyl-terminated PPDO and dicarboxylated PEG. The prepolymers and the resulting PPDO/PEG multiblock copolymers were characterized by various analytical techniques such as FT-IR, ¹H NMR, GPC, DSC and TG. At high concentration levels above critical gelation concentration (CGC), the aqueous solution of copolymers formed a gel. Temperature-sensitive gel to sol transition behaviors were investigated by the test tube inverting method. Dynamic light scattering (DLS) was used to investigate the micelle of copolymers, whose association probably caused the gelation of the system. Therefore, this novel copolymer has a great potential in injectable drug-delivery system for long-term delivery of drugs.     

Quantitative analysis of biodegradable amphiphilic poly(L-lactide)-block-poly(ethyleneglycol)-blockpoly(L-lactide) by using TG, FTIR and NMR

The thermogravimetric analysis (TG) of two series of tri-block copolymers based on poly(L,L-lactide) (PLLA) and poly(ethyleneglycol) (PEG) segments, having molar mass of 4000 or 600 g mol^–1, respectively, is reported. The prepared block copolymers presented wide range of molecular masses (800 to 47500 g mol^–1) and compositions (16 to 80 mass% PEG). The thermal stability increased with the PLLA and/or PEG segment size and the tri-block copolymers prepared from PEG 4000 started to decompose at higher temperatures compared to those copolymers from PEG 600. The copolymers compositions were determined by thermogravimetric analysis and the results were compared to other traditional quantitative spectroscopic methods, hydrogen nuclear magnetic resonance spectrometry (¹HNMR) and Fourier transform infrared spectrometry (FTIR). The PEG 4000 copolymer compositions calculated by TG and by ¹HNMR, presented differences of 1%, demonstrating feasibility of using thermogravimetric analysis for quantitative purposes.     

Facile synthesis of ABCDE‐type H‐shaped quintopolymers by combination of ATRP,ROP, and click chemistry and their potential applications as drug carriers

A facile approach to synthesis of ABCDE‐type H‐shaped quintopolymer comprising polystyrene (PSt, C) main chain and poly(ethylene glycol) (PEG, A), poly(ε‐caprolactone) (PCL, B), poly(L ‐lactide) (PLLA, D), and poly(acrylic acid) (PAA, E) side chains was described, and physicochemical properties and potential applications as drug carriers of copolymers obtained were investigated. Azide‐alkyne cycloaddition reaction and hydrolysis were used to synthesize well‐defined H‐shaped quintopolymer. Cytotoxicity studies revealed H‐shaped copolymer aggregates were nontoxic and biocompatible, and drug loading and release properties were affected by macromolecular architecture, chemical composition, and pH value. The release rate of doxorubicin from copolymer aggregates at pH 7.4 was decreased in the order PAA‐b‐PLLA > H‐shaped copolymer > PEG‐PCL‐PSt star, and the release kinetics at lower pH was faster. The H‐shaped copolymer aggregates have a potential as controlled delivery vehicles due to their excellent storage stability, satisfactory drug loading capacity, and pH‐sensitive release rate of doxorubicin. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012