无水AlCl3 催化合成对甲基-N,N-二氰乙基苯胺

对甲基苯胺与丙烯腈在A lC l3催化下发生加成反应合成对甲基-N,N-二氰乙基苯胺。最佳反应条件为:对甲基苯胺934 mmol,n(对甲基苯胺)∶n(丙烯腈)=1.0∶2.8,w(A lC l3)=30%(以对甲苯胺质量计),于78℃~90℃反应8 h,收率93%。     

邻位和间位取代苯胺与丙烯腈的单氰乙基化反应

对于邻位、间位取代苯胺与丙烯腈发生单氰乙基反应生成相应的N-氰乙基邻位取代苯胺和N-氰乙基间位取代苯胺的过程,AlCl3具有高的催化活性。在芳香胺/丙烯腈/AlCl3=1/1.10/(0.05～0.10)(摩尔比)、反应温度60～80℃,反应时间6～10h的条件下,反应的收率达87%～90%。用毛细管气相色谱法分析了单氰乙基化反应中各组份的含量;所合成的7种N-氰乙基邻位取代苯胺和N-氰乙基间位取代苯胺用DTA-TG、UV、IR、1HNMR和EA进行了物性和结构表征。     

酸性离子液体催化合成N-氰乙基-N-羟乙基苯胺

N-氰乙基-N-羟乙基苯胺是一种具有广泛用途的染料中间体,针对传统合成方法中的缺陷,以1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO 4)为催化剂,丙烯腈和N-羟乙基苯胺为原料,建立了N-氰乙基-N-羟乙基苯胺的绿色合成新工艺。系统考察了离子液体种类、离子液体用量、底物比例等因素的影响规律,结果表明,[BMIM]HSO 4用量为0.8 mmol,n(N-羟乙基苯胺)∶[KG-*3/5]n(丙烯腈)=1∶[KG-*3/5]1.2,反应温度为90℃,反应时间为12 h时,N-氰乙基-N-羟乙基苯胺产率最高(89%),离子液体循环使用5次后,催化活性基本保持不变。     

AlCl3催化对位取代苯胺与丙烯腈加成反应的研究

报道了无水AlCl3催化5种对位取代苯胺与丙烯腈发生Michael加成反应生成相应的N-氰乙基对位取代苯胺、N,N-二氰乙基对位取代苯胺, 结果表明, AlCl3对该类反应具有很高的催化活性. 在丙烯腈稍过量、较低温度、少量AlCl3催化剂的催化下, 主要生成N-氰乙基对位取代苯胺, 收率达88%～90%; 在丙烯腈过量较多、75～85 ℃及较多AlCl3催化剂的催化下, 主要生成 N,N-二氰乙基对位取代苯胺, 收率达88%～91%. 当加入Lewis碱NaOAc作助催化剂时有利于提高N-氰乙基对位取代苯胺的选择性和收率; 当加入Lewis 酸ZnCl2作助催化剂时则有利于提高N,N-二氰乙基对位取代苯胺的选择性和收率. 并对合成的5种N,N-二氰乙基对位取代苯胺用TG-DTA, UV, IR, NMR和元素分析进行了物性和结构表征.     

原位液相催化加氢法合成N-乙基苯胺和N，N-二乙基苯胺

以硝基苯为原料,Pt/γ-Al2O3为催化剂,乙醇水溶液为溶剂和氢供体,采用原位液相加氢一步法合成了N-乙基苯胺和N,N-二乙基苯胺.采用低温N2吸附-脱附、电感耦合等离子体发射光谱、X射线衍射、程序升温化学吸附和透射电子显微镜等对Pt/γ-Al2O3催化剂进行了表征,并考察了所制备催化剂的原位液相加氢性能.结果表明,在温度为503K、压力为5.0MPa、空速为3.2h-1、溶剂水含量为30%以及硝基苯浓度为8%的反应条件下,在Pt/γ-Al2O3催化剂上原位液相加氢合成N-乙基苯胺及N,N-二乙基苯胺有较好的结果,硝基苯转化率达到100%,N-乙基苯胺和N,N-二乙基苯胺的总收率达到99.5%.讨论了硝基苯原位液相加氢合成N-乙基苯胺和N,N-二乙基苯胺的反应机理.     

对甲氧基苯胺与丙烯腈的催化加成

对甲氧基-N,N-二氰乙基苯胺是一种重要的有机中间体,可由对甲氧基苯胺与丙烯腈在酸的催化下发生加成反应而得。然而芳胺与丙烯腈发生的加成反应较难进行,采用HAc,FeC l3,CuC l2,Cu2C l2,ZnC l2,蒙脱土,Cu(Ac)2·3H2O作催化剂得到的主要为单氰乙基物[1-4]。赵莹[5-10]报道了用A     

无水AlCl3催化氯苯胺与丙烯腈的加成反应

报道了无水AlCl3催化邻、间、对氯苯胺三种异构体与丙烯腈发生催化加成反应生成相应的N_氰乙基邻氯苯胺、N_氰乙基间氯苯胺、N_氰乙基对氯苯胺和N,N_二氰乙基邻氯苯胺、N,N_二氰乙基间氯苯胺、N,N_二氰乙基对氯苯胺。结果表明,AlCl3是一种对该类反应具有高催化活性的催化剂。在较低的温度下,用3%～10%(占氯代苯胺的摩尔百分数,以下同)的AlCl3,主要获得单氰乙基产物,最高收率为88%～92%;在较高的温度下,用30%～100%的AlCl,主要获得二氰乙基产物,最高收率为76%～89%。     

4-(N-乙基-3-甲基苯胺基）丁酸甲酯的合成

以γ-丁内酯为起始原料,经开环氯化和醇解反应合成4-氯丁酸甲酯（2）; 2与N-乙基间甲苯胺经亲核取代反应合成了4-(N-乙基-3-甲基苯胺基）丁酸甲酯,纯度97.5%,总收率75.3%,其结构经¹H NMR确证。     

硝基苯和乙醇一锅法合成N-乙基苯胺

以硝基苯和乙醇一锅法合成N-乙基苯胺为例,报道了芳香硝基物和醇类化合物在一个反应器内,在相同催化剂作用下和在相同反应条件下一锅法合成N-烷基芳胺的新方法.在该方法中,醇类化合物水相重整过程中产生的氢原位地将芳香硝基物加氢还原生成芳胺,紧接着在较低的H2分压条件下,芳胺与醇发生N-烷基化反应生成相应的N-烷基芳胺.在硝基苯：无水乙醇：水的体积比为10：60：0时,在T=413K和P=1MPa条件下反应8h,硝基苯和苯胺被完全转化,N-乙基苯胺的选择性为85.9％,N,N-二乙基苯胺选择性在0-4％之间,明显优于传统的合成方法。实验结果表明,这种方法可及时地将反应过程产生的氢和芳胺从催化剂表面移走,为提高目标产物N-烷基芳胺的选择性提供了可能。     

5-乙基-2-吲哚酮的合成及其酰基化和N上烃基化反应研究

以4-乙基苯胺1为原料,经Sandmeyer反应得5-乙基靛红2;2经水合肼还原得到5-乙基-2-吲哚酮3;N,N-二甲基甲酰胺与三氯氧磷先形成Vilsmeier-Haack试剂,再与化合物3反应,合成2-氯-5-乙基-3-乙酰吲哚4;以丙酮为溶剂,对化合物4烃基化,以78.5%-95.6%的收率得到N-取代-2-氯-5-乙基-3-乙酰吲哚5a-5e。其中化合物4、5a-5e均未见文献报道,它们的结构均通过红外光谱、核磁共振氢谱(碳谱),质谱等确认。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.