无机过氧化物的研究——Ⅱ.从粉状白钨酸制备过氧钨酸钕

应用倒滴加法制备的粉状白钨酸,制备了两个新的不同组成的过氧钨酸钕:NH_4NdW_2(O_2)_5(OH)_2·4H_2O(1)和NH_4NdW_3(O_2)_3O_8·6H_2O(2)并对化合物的一些性质进行了表征。     

超临界水热极速合成异质结构H4SiW12O40/Bi2WO6光催化剂及其脱氮性能

采用超临界水热合成方式极速合成一种H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂,通过X射线衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、比表面积及孔隙度(BET)测定对所合成催化剂的结构和性质进行了考察,并以吡啶含量为15 mg/g的模拟油对光催化剂的脱氮效果进行评价。结果表明,该光催化剂为二维纳米片自组装成的三维球状结构,其中,H_4SiW_(12)O_(40)与Bi_2WO_6不是简单的固载关系而是在超临界水热条件下生成一种新的晶相,正是由于这种晶相的存在,使得H_4SiW_(12)O_(40)牢固固载在Bi_2WO_6光催化剂本体上的同时,对光生载流子进行了有效疏导,提升了H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂的使用寿命和光催化活性。本研究针对光催化剂制备周期与晶形发育的矛盾,将超临界水热技术与光催化剂模板导向合成技术有机结合,在获得良好晶形异质结构H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂的同时明显缩短了光催化剂的制备周期,从而降低了催化剂的制备成本,攻克了光催化剂工业化应用的主要矛盾,所制备的H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂轻质油脱氮效率达97%以上。     

K9TaW11O40.15H2O的合成及性质

迄今为止,有关钨钽杂多阴离子的报道极少。由于杂多酸在石油化工、颜料等领域有重要用途,人们对研究新的杂多阴离子的合成一直有着浓厚兴趣,也是杂多酸化学的重要内容。本文报道粉状白钨酸和可溶性钽酸钾溶液反应以合成十二聚系列的钨钽酸钾化合物。 钽酸钾按文献[1]制备,以Ta_2O_5(99.9%)与K_2CO_3之比1∶2的混合物于970℃熔融后     

仲钨酸B的形成及其在钨钼分离中的应用

用SiO_2作催化剂可大大加快仲钨酸A转变成仲钨酸B,反应后溶液的pH值从6.7升至8.1,在此pH条件下,MoO_4~(2-)不聚合成Mo_7O_(24)~(6-),利用这一差异,在含有杂质钼的仲钨酸B溶液中,加入胍盐后,钨以仲钨酸B胍盐[CN_3H_6]_6W_7O_(24)·4H_2O形式沉淀,钼以MoO_4~(2-)留在溶液中,从而可分离钨和钼。     

空心球形In2O3/ZrO2-TiO2纳米复合材料多模式光催化

本文以聚苯乙烯(PS)胶球为模板,通过一步水浴法结合煅烧后处理制备了不同比例的In_2O_3/ZrO_2-TiO_2空心球状复合材料(简写为In_2O_3/ZrO_2-TiO_2-H)。通过X-射线衍射、扫描电镜、X-射线光电子能谱、紫外-可见漫反射吸收光谱和氮气吸附-脱附等测试手段对该系列复合材料的结构、组成和形貌进行了表征。结果表明,In_2O_3/ZrO_2-TiO_2复合材料经PS模板处理后呈现空心球状结构,球壁由纳米粒子堆积而成。将In_2O_3与ZrO_2-TiO_2复合后其光吸收性能呈现了一定的红移现象,且In_2O_3/ZrO_2-TiO_2-H(1∶4)的比表面积较大(66.92m~2·g~(-1))。同时,为了考察该复合材料的光催化性能,在多模式光催化条件下对甲基橙的降解情况进行了研究。结果表明,In_2O_3/ZrO_2-TiO_2-H(1∶4)表现出较好的光催化性能,其光催化活性高于P25、ZrO_2、In_2O_3/ZrO_2-TiO_2及其他体积比的In_2O_3/ZrO_2-TiO_2-H。     

LiMn_2O_4/TiO_2催化剂上甲烷氧化偶联反应性能的研究

采用固相反应法制备了具有尖晶石结构的LiMn_2O_4/TiO_2系列催化剂,探讨了TiO_2、Li/TiO_2、Mn/TiO_2、LiMn_2O_4及LiMn_2O_4/TiO_2等不同组成催化剂的甲烷氧化偶联反应性能,采用XRD、XPS、CO_2-TPD和H_2-TPR等表征方法对该系列催化剂进行了分析。结果表明,具有尖晶石结构的LiMn_2O_4化合物具有较高的甲烷氧化偶联催化活性,在775℃、0.1MPa、7200mL/(h·g),CH_4∶O_2(体积比)为2.5的条件下,甲烷转化率可达25.8%,C2选择性可达43.2%。TiO_2的存在不仅进一步提高了甲烷转化率和C2选择性,还有效抑制了甲烷完全氧化形成CO_2的过程。负载8%LiMn_2O_4的LiMn_2O_4/TiO_2催化剂性能达到最优,此时甲烷转化率达到31.6%,C2选择性为52.4%,CO_2选择性降低到26.3%。考察了不同焙烧温度对催化剂活性的影响,850℃为LiMn_2O_4/TiO_2催化剂的最佳焙烧温度。     

BaB2O4—CdO和BaB2O4—ZnO二元系相图的研究

本文用差热分析和X射线衍射方法测定了BaB_2O_4-CdO和BaB_2O_4-ZnO二元系相图。在BaB_2O_4-CdO体系中存在着一新化合物BaCdB_2O_5,在785±3℃同成份熔化。在BaB_2O_4-ZnO体系中,由包晶反应形成一新化合物BaZn_3B_2O_7,反应温度为903±3℃。在富BaB_2O_4区形成一个宽的低温相BaB_2O_4固溶区。研究结果表明,用Zn~(2 )替代BaB_2O_4中Ba~(2 )形成固溶体,不能将高温相BaB_2O_4稳定到室温,证实了“经验函数关系式”的预测结果。     

以Fe_2P_2O_7为前驱体制备LiFePO_4及其电化学性能（英文）

以磷铁废渣(Fe1.5P)和温室效应气体CO_2为原料,以磷酸为补充磷源合成磷酸铁锂(LiFePO_4)的前驱体Fe_2P_2O_7,并研究了其合成过程对LiFePO_4正极材料储能性能的影响。采用SEM观察了LiFePO_4的表面形貌,采用XRD分析了LiFePO_4和Fe_2P_2O_7的晶体结构。进一步对该方法进行优化,发现Fe1.5P与磷酸混合物(nFe1.5P∶nH3PO4=1∶1)在800℃热处理6 h合成的Fe_2P_2O_7对应的LiFePO_4/C电化学性能最好,在0.1C,0.2C,0.5C和1C倍率下的容量分别可达130,126,117和108 m Ah·g~(-1)。     

铈改性纳米Ti/SnO_2-Sb_2O_3电极的制备及催化性能

以SnCl_4·5H_2O,Sb_2O_3和Ce(NO_3)_3·6H_2O为前驱体,采用溶胶-凝胶法制备了Ce改性Ti/SnO_2-Sb_2O_3电极。通过对Ce改性Ti/SnO_2-Sb_2O_3电极的析氧电位的测试及油田废水降解情况的考察,优化了稀土的掺杂量和热处理方法;分析了电极的电催化氧化能力。借助SEM,EDX和XRD等检测手段对所制备电极的表面形貌、元素组成、晶体结构进行了表征和分析。结果表明:最优掺杂比为Sn∶Sb∶Ce=100∶10∶2.5(摩尔比),最优热处理方法为方法二,此电极对目标有机物COD去除率达到91.2%,发现Ce的掺杂有利于电极催化性能的提高。     

超导相Tl_2Ba_2CuO_6的制备和晶体结构研究

Tl_2 Ba_2 Ca_(n-1) Cu_n O_(2n 4)(n=1,2,3,4)体系中以Tl_2 Ba_2 CuO_6 T_c最低。我们得到此单相,测定了晶体结构,以了解结构因素和超导性、生成机理的关系。制备与表征由BaO_2和CuO按1∶1混合,在880℃长时间加热,使之充分反应制得BaCuO_2,再加Tl_2O_3按1∶1计量比混合、研磨、压片,然后放入预热到850℃的管式炉内,在氧气氛中加热,约30-40分钟后取出,在空气中快速冷却,然后按计量比补充因挥发损失的Tl_2O_3,重新研磨、     

Sc2MgGa2 and Y2MgGa2

Scandium magnesium gallide, Sc₂MgGa₂, and yttrium magnesium gallide, Y₂MgGa₂, were synthesized from the corresponding elements by heating under an argon atmosphere in an induction furnace. These intermetallic compounds crystallize in the tetragonal Mo₂FeB₂‐type structure. All three crystallographically unique atoms occupy special positions and the site symmetries of (Sc/Y, Ga) and Mg are m2m and 4/m, respectively. The coordinations around Sc/Y, Mg and Ga are pentagonal (Sc/Y), tetragonal (Mg) and triangular (Ga) prisms, with four (Mg) or three (Ga) additional capping atoms leading to the coordination numbers [10], [8+4] and [6+3], respectively. The crystal structure of Sc₂MgGa₂ was determined from single‐crystal diffraction intensities and the isostructural Y₂MgGa₂ was identified from powder diffraction data.     

Zur Kenntnis der Dialkalimetalldichalkogenide β-Na2S2, K2S2, α-Rb2S2, β-Rb2S2, K2Se2, Rb2Se2, α-K2Te2, β-K2Te2 und Rb2Te2

On Dialkali Metal Dichalcogenides β-Na₂S₂, K₂S₂, α-Rb₂S₂, β-Rb₂S₂, K₂Se₂, Rb₂Se₂, α-K₂Te₂, β-K₂Te₂ and Rb₂Te₂ The first presentation of pure samples of α- and β-Rb₂S₂, α- and β-K₂Te₂, and Rb₂Te₂ is described. Using single crystals of K₂S₂ and K₂Se₂, received by ammonothermal synthesis, the structure of the Na₂O₂ type and by using single crystals of β-Na₂S₂ and β-K₂Te₂ the Li₂O₂ type structure will be refined. By combined investigations with temperature-dependent Guinier-, neutron diffraction-, thermal analysis, and Raman-spectroscopy the nature of the monotropic phase transition from the Na₂O₂ type to the Li₂O₂ type will be explained by means of the examples α-/β-Na₂S₂ and α-/β-K₂Te₂. A further case of dimorphic condition as well as the monotropic phase transition of α- and β-Rb₂S₂ is presented. The existing areas of the structure fields of the dialkali metal dichalcogenides are limited by the model of the polar covalence.     

Crystal Structures of [Bu2Sn(O2PPh2)2], [Ph2Sn(O2PPh2)2], and [PhClSn(O2PPh2)OMe]2. Raman Spectra of [Ph2Sn(O2PPh2)2] and [PhClSn(O2PPh2)OMe]2

[(n‐Bu)₂Sn(O₂PPh₂)₂] ( 1 ), and [Ph₂Sn(O₂PPh₂)₂] ( 2 ) have been synthesized by the reactions of R₂SnCl₂ (R=n‐Bu, Ph) with HO₂PPh₂ in Methanol. From the reaction of Ph₂SnCl₂ with diphenylphosphinic acid a third product [PhClSn(O₂PPh₂)OMe]₂ ( 3 ) could be isolated. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/c with a = 1303.7(1) pm, b = 2286.9(2) pm, c = 1063.1(1) pm, β = 94.383(6)°, and Z = 4. 2 crystallizes triclinic in the space group , the cell parameters being a = 1293.2(2) pm, b = 1478.5(4) pm, c = 1507.2(3) pm, α = 98.86(3)°, β = 109.63(2)°, γ = 114.88(2)°, and Z = 2. Both compounds form arrays of eight‐membered rings (SnOPO)₂ linked at the tin atoms to form chains of infinite length. The dimer 3 consists of a like ring, in which the tin atoms are bridged by methoxo groups. It crystallizes triclinic in space group with a = 946.4(1) pm, b = 963.7(1) pm, c = 1174.2(1) pm, α = 82.495(6)°, β = 66.451(6)°, γ = 74.922(6)°, and Z = 1 for the dimer. The Raman spectra of 2 and 3 are given and discussed.     

Electrochemical study of (NEt4)2Cl2FeS2MoS2 and (NEt4)2Cl2FeS2MoS2FeCl2

Summary The ability of [MoS₄]^2–, anions to be used as ligands for transition metal ions has been widely demonstrated, especially with Fe²⁺. The present study has been restricted to linear complexes such as (NEt₄)₂ [Cl₂FeS₂MoS₂] and (NEt₄)₂[Cl₂FeS₂MoS₂FeCl₂]. Their electrochemical properties are described: upon electrochemical reduction, these compounds yield MoS₂, as a black precipitate, and an iron complex in solution, assumed to be [SFeCl₂]^2–. The electrochemical reduction goes through two electron transfers, coupled with the breakdown of the molecular skeleton: a DISPl and an ECE mechanism. Depending on the solvent, the following equilibrium may be observed: [Cl₄Fe₂MoS₄]^2–[Cl₂FeMoS₄]^2–+FeCl₂. The equilibrium constant, K_D, was evaluated by differential pulse polarography. K_D is tightly related to the donor number of the solvent.     

The alkali hypophosphites KH2PO2, RbH2PO2 and CsH2PO2

The structures of the hypophosphites KH₂PO₂ (potassium hypophosphite), RbH₂PO₂ (rubidium hypophosphite) and CsH₂PO₂ (caesium hypophosphite) have been determined by single‐crystal X‐ray diffraction. The structures consist of layers of alkali cations and hypophosphite anions, with the latter bridging four cations within the same layer. The Rb and Cs hypophosphites are isomorphous.     

Syntheses,Spectroscopic Studies,and Crystal Structures of Me2Sn(O2PPh2)2, Ph2Pb(O2PMe2)2, and Ph2Pb(O2PPh2)2

Me₂Sn(O₂PPh₂)₂ ( 1 ), Ph₂Pb(O₂PMe₂)₂ ( 2 ), and Ph₂Pb(O₂PPh₂)₂ ( 3 ) have been synthesized by the reactions of Me₂SnCl₂ or Ph₃PbCl with the corresponding diorganophosphinic acid in methanol. X‐ray diffraction studies show that the diorganophosphinate groups behave as double bridges between the metal atoms leading to polymeric ring‐chain structures with M₂O₄P₂ (M = Pb, Sn) eight‐membered rings. The organic groups bonded to the metal atoms are in trans‐position in the resulting octahedral arrangement around the metal atoms. The IR and the mass spectra were reported and discussed.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.