Soft secondary building unit: dynamic bond rearrangement on multinuclear core of porous coordination polymers in gas media

A new synthetic approach to prepare flexible porous coordination polymers (PCPs) by the use of soft secondary building units (SBUs) which can undergo multiple reversible metal-ligand bonds breaking is reported. We have prepared a zinc paddle-wheel-based two-fold interpenetrated PCP, {[Zn(2)(tp)(2)(L(2))]·2.5DMF·0.5water}(n) (2a, H(2)tp = terephthanlic acid; L(2) = 2,3-difluoro-1,4-bis(4-pyridyl)benzene), showing dynamic structural transformations upon the removal and rebinding of guest molecules. The X-ray structures at different degrees of desolvation indicate the highly flexible nature of the framework. The framework deformations involve slippage of the layers and movement of the two interpenetrated frameworks with respect to each other. Interestingly, the coordination geometry of a zinc paddle-wheel unit (one of the popular SBUs) is considerably changed by bond breaking between zinc and oxygen atoms during the drying process. Two zinc atoms in the dried form 2d reside in a distorted tetrahedral geometry. Compound 2d has no void volume and favors the uptake of O(2) over Ar and N(2) at 77 K. The O(2) and Ar adsorption isotherms of 2d show gate-opening-type adsorption behaviors corroborating the structure determination. The CO(2) adsorption isotherm at 195 K exhibits multiple steps originating from the flexibility of the framework. The structural transformations of the zinc clusters in the framework upon sorption of guest molecules are also characterized by Raman spectroscopy in which the characteristic bands corresponding to ν(sym)(COO(-)) vibration were used.     

Reactions of (di)manganese carbonyl ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN) in the gas phase

The gas-phase reactions of a series of (di)manganese carbonyl positive ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me(3)TACN) have been examined with the aid of Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. The monomanganese carbonyl ions, [Mn(CO)(n)](+) (n = 2-5), react predominantly by ligand exchange and to a minor extent by electron transfer with the formation of the radical cation of Me(3)TACN. For the [Mn(CO)(n)](+) (n = 2-4) ions, the ligand exchange results in the exclusive formation of a [Mn(Me(3)TACN)](+) complex, whereas small amounts of [Mn(CO)(Me(3)TACN)](+) ions are also generated in the reactions of the [Mn(CO)(5)](+) ion. The [Mn(2)(CO)(n)](+) ions (n = 2, 4 and 5) react also by competing electron transfer and ligand exchange. The reaction of the [Mn(2)(CO)(2)](+) and [Mn(2)(CO)(4)](+) ions is associated with cleavage of the Mn--Mn bond as evidenced by the pronounced formation of [Mn(Me(3)TACN)](+) ions. For [Mn(2)(CO)(5)](+), the ligand exchange leads mainly to the formation of [Mn(2)(CO)(n)(Me(3)TACN)](+) (n = 1-3) ions. These primary product ions react subsequently by the incorporation of a second Me(3)TACN molecule to afford [Mn(2)(CO)(Me(3)TACN)(2)](+) and [Mn(2)(CO)(2)(Me(3)TACN)(2)](+) ions. Both of these latter species incorporate an oxygen molecule with formation of ions with the assigned composition of [Mn(2)(O(2))(CO)(Me(3)TACN)(2)](+) and [Mn(2)(O(2))(CO)(2)(Me(3)TACN)(2)](+).     

Entanglement of individual coordination polymers having helicates as building intermediates

A series of Ag(I) coordination compounds, from one-dimensional chains to 3D porous frameworks, were achieved from N,N'-bis[1-(2-pyrazinyl)ethylidene]benzil dihydrazone, L, via self-assembly, using helicates as effective secondary building units. Compound 2 [(Ag(2.75)L)(NO(3))(2.75)] was comprised of two opposite-handed 3D frameworks formed by connecting the 4(1) helical chains into (10(3)-b) nets. The pairs of the racemic 3D frameworks were connected through additional silver(I) centers and entangled each other forming a racemic 3D net. Compound 3 [(Ag(13)L(8))(BF(4))(13)(H(2)O)(12)] was comprised of a 3D framework that was constructed from double-helical building intermediates Ag(2)L(2) with one-dimensional infinite chains being threaded into the large voids of a 3D framework to form a weave structure. The ladder-like chains in compound 4 [(Ag(3)L(2))(ClO(3))(3)(CH(3)OH)(2)(CH(3)CN)] were formed by the addition of excess NaClO(3) into the methanol solution containing AgNO(3) and the ligand L, and the zigzag chains in compound 5 [(Ag(2)L(2))(ClO(4))(2)(CH(3)CN)(2)] were constructed by the addition of excess NaClO(4) into an acetonitrile solution containing AgNO(3) and the ligand L.     

Highly porous 4,8-connected metal-organic frameworks: synthesis, characterization, and hydrogen uptake

A series of highly porous 4,8-connected isoreticular MOFs of the scu topology [Cu(4)(L(1))(H(2)O)(4)]·20DEF, [Cu(4)(L(2))(H(2)O)(4)]·16DMF·5H(2)O, and [Cu(4)(L(3))(H(2)O)(4)]·14DMF (L(1)-L(3) are (R)-1,1'-binaphthyl-derived octacarboxylate bridging ligands) were synthesized and characterized by single-crystal X-ray crystallography. Although the frameworks exhibit some distortion during the solvent removal process, the high-connectivity nature of the building blocks helps in stabilizing the frameworks, leading to high surface areas (S(BET) = 1189-2448 m(2)/g) and significant hydrogen uptake of up to 1.8 wt % (77 K, 1 atm).     

Tuning MOF Stability and Porosity via Adding Rigid Pillars

High stability and permanent porosity are the premise of general applicability for metal-organic framework materials (MOFs). By varying degrees of success on increasing the connectivity of the linear pillar 4,4'-bipyridine (bpy), two isostructural flexible frameworks [M(2)(obb)(2)(DMF)(2)]·2DMF (1, M = Zn or Cu; H(2)obb = 4,4'-oxybis(benzoic acid), DMF = N,N-dimethylformamide) with no gas sorption are structurally modified into two rigid frameworks [Zn(2)(obb)(2)(bpy)]·DMF (2) and [Cu(2)(obb)(2)(bpy)(0.5)(DMF)]·2DMF (3) with notable gas sorption and separation properties. Especially for 3, it exhibits gas selective uptake for the adsorption of CO(2) over N(2) and CH(4) under 273 K and has an interesting physically lock effect in benzene and cyclohexane sorption. The results provide a successful strategy on tuning framework stability of flexible structures via adding rigid pillars.     

Structure, adsorption and magnetic properties of chiral metal-organic frameworks bearing linear trinuclear secondary building blocks

The reactions of new chiral organic ligands trimesoyltri(L-alanine) (L-TMTAH(3)) or trimesoyltri(D-alanine) (D-TMTAH(3)) with transition metal salts in the presence of an ancillary ligand of 4,4'-bipyridine gave two pairs of three dimensional frameworks [Co(3)(L-TMTA)(2)(4,4'-bpy)(4)]·28H(2)O (1), [Co(3)(D-TMTA)(2)(4,4'-bpy)(4)]·28H(2)O (2) [Ni(3)(L-TMTA)(2)(4,4'-bpy)(4)]·2C(2)H(5)OH·14H(2)O (3) and [Ni(3)(D-TMTA)(2)(4,4'-bpy)(4)]·2C(2)H(5)OH·14H(2)O (4). These compounds were characterized by elemental analysis, IR, and X-ray powder diffraction analysis and the structures of 1-3 were determined from X-ray single crystal diffraction analysis. Complexes 1-4 feature linear trinuclear secondary building blocks [M(3)(COO)(4)](2+) formed via the connection of three metal ions by four carboxylato groups from four TMTA(3-) ligands. Every adjacent two linear trinuclear secondary building blocks are linked by one and three 4,4'-bipyridine molecules along the a and c axis, respectively, to form two-dimensional sheets, which are further connected by TMTA(3-) ligands to construct a porous three dimensional framework with one-dimensional channels. Compound 3 was taken as an example to investigate the adsorption properties of compounds 1-4. It revealed a saturated hydrogen uptake of 216.6 cm(3) g(-1) (2.0 wt%) at 11.1 atm measured at 77 K, a maximum CO(2) uptake of 119.4 cm(3) g(-1) (23.5 wt%) at 19.5 atm measured at 298 K and a saturated CH(4) uptake of 77.8 cm(3) g(-1) (5.6 wt%) at 27.1 atm measured at 298 K. The magnetic studies of complexes 1 and 3 indicate the presence of antiferromagnetic interactions between the metal ions in the two compounds.     

A 3D canted antiferromagnetic porous metal-organic framework with anatase topology through assembly of an analogue of polyoxometalate

The unique porous metal-organic framework {KCo3(C6H4O7)(C6H5O7)(H2O)2.8H2O}8 (1), which exhibits an unprecedented infinite 3D (3,6)-connected decorated anatase net, has been obtained by hydrothermal reaction. Upon dehydration, the compound retains crystallinity and exhibits a type I N2 sorption isotherm, characteristic of a microporous solid with apparent Langmuir surface area 939 m2/g and pore volume 0.31 cm3/g. Magnetic measurements for both 1 and dehydrated 1 show the spin-canted antiferromagnetic state below 5 K and a magnetic hysteresis loop at 2 K. Thus, dehydrated 1 represents the first metal-organic framework for which microporosity and a spin-canted antiferromagnetic state coexist, which demonstrates that the self-assembly of organo-polymetal clusters and metal ions can provide a potential route to magnetic porous metal-organic frameworks.     

Structures and properties of porous coordination polymers based on lanthanide carboxylate building units

A series of 3-D lanthanide porous coordination polymers, [Ln(6)(BDC)(9)(DMF)(6)(H(2)O)(3)·3DMF](n) [Ln = La, 1; Ce, 2; Nd, 3], [Ln(2)(BDC)(3)(DMF)(2)(H(2)O)(2)](n) [Ln = Y, 4; Dy, 5; Eu, 6], [Ln(2)(ADB)(3)(DMSO)(4)·6DMSO·8H(2)O](n) [Ln = Ce, 7; Sm, 8; Eu, 9; Gd, 10], {[Ce(3)(ADB)(3)(HADB)(3)]·30DMSO·29H(2)O}(n) (11), and [Ce(2)(ADB)(3)(H(2)O)(3)](n) (12) (H(2)BDC = benzene-1,4-dicarboxylic acid and H(2)ADB = 4,4'-azodibenzoic acid), have been synthesized and characterized. In 1-3, the adjacent Ln(III) ions are intraconnected to form 1-D metal-carboxylate oxygen chain-shaped building units, [Ln(4)(CO(2))(12)](n), that constructed a 3-D framework with 4 × 7 ? rhombic channels. In 4-6, the dimeric Ln(III) ions are interlinked to yield scaffolds with 3-D interconnecting tunnels. Compounds 7-10 are all 3-D interpenetrating structures with the CaB6-type topology structure. Compound 11 is constructed by ADB spacers and trinulcear Ce nodes with a NaCl-type topology structure and a 1.9-nm open channel system. In 12, the adjacent Ce(III) ions are intraconnected to form 1-D metal-carboxylate oxygen chain-shaped building units, [Ln(4)(CO(2))(12)](n), and give rise to a 3-D framework. Moreover, 6 exhibits characteristic red luminescence properties of Eu(III) complexes. The magnetic susceptibilities, over a temperature range of 1.8-300 K, of 3, 6, and 7 have also been investigated; the results show paramagnetic properties.     

Synthesis, structures, and properties of two three-dimensional metal-organic frameworks, based on concurrent ligand extension

A tritopic carboxylate ligand, tris(4'-carboxybiphenyl)amine (L-H(3)), has been synthesized and applied in the construction of microporous metal-organic frameworks (MOFs). Two novel metal-organic frameworks (MOFs), {[Zn(2)(L)(OH)]·2DMF·H(2)O}(∞) (1) and {[Cu(L-H)(DMA)]·DMA·2H(2)O}(∞) (2), have been constructed out of L-H(3), Zn(2+), and Cu(2+), respectively. 1 has a 2-fold interpenetrating three-dimensional framework formed by L connectors and the [Zn(2)(CO(2))(3)] secondary building units (SBUs). As for 1, it is worth pointing out that one μ(2)-OH group links two Zn atoms between two neighboring SBUs to produce interesting Zn-O-Zn zigzag chains in the structure. 2 has a two-dimensional grid sheet formed by L-H connectors and the typical paddle-wheel [Cu(2)(CO(2))(4)] SBUs. Two-dimensional (2D) sheets nest with each other, which finally forms a three-dimensional (3D) nested framework. Two MOFs are characterized by infrared (IR) spectroscopy, thermogravimetry, single-crystal and elemental analyses, and powder X-ray diffraction methods. Framework 1' exhibits high permanent porosity (Langmuir surface area = 848 m(2)/g), high thermal stability (up to 450 °C), highly active properties for Friedel-Crafts alkylation reaction, as well as the potential application for the CO(2) gas storage and luminescent material. The catalytic results reveal that 2' is indeed an efficient heterogeneous catalyst for olefin epoxidation reactions.     

Doping metal-organic frameworks for water oxidation, carbon dioxide reduction, and organic photocatalysis

Catalytically competent Ir, Re, and Ru complexes H(2)L(1)-H(2)L(6) with dicarboxylic acid functionalities were incorporated into a highly stable and porous Zr(6)O(4)(OH)(4)(bpdc)(6) (UiO-67, bpdc = para-biphenyldicarboxylic acid) framework using a mix-and-match synthetic strategy. The matching ligand lengths between bpdc and L(1)-L(6) ligands allowed the construction of highly crystalline UiO-67 frameworks (metal-organic frameworks (MOFs) 1-6) that were doped with L(1)-L(6) ligands. MOFs 1-6 were isostructural to the parent UiO-67 framework as shown by powder X-ray diffraction (PXRD) and exhibited high surface areas ranging from 1092 to 1497 m(2)/g. MOFs 1-6 were stable in air up to 400 °C and active catalysts in a range of reactions that are relevant to solar energy utilization. MOFs 1-3 containing [Cp*Ir(III)(dcppy)Cl] (H(2)L(1)), [Cp*Ir(III)(dcbpy)Cl]Cl (H(2)L(2)), and [Ir(III)(dcppy)(2)(H(2)O)(2)]OTf (H(2)L(3)) (where Cp* is pentamethylcyclopentadienyl, dcppy is 2-phenylpyridine-5,4'-dicarboxylic acid, and dcbpy is 2,2'-bipyridine-5,5'-dicarboxylic acid) were effective water oxidation catalysts (WOCs), with turnover frequencies (TOFs) of up to 4.8 h(-1). The [Re(I)(CO)(3)(dcbpy)Cl] (H(2)L(4)) derivatized MOF 4 served as an active catalyst for photocatalytic CO(2) reduction with a total turnover number (TON) of 10.9, three times higher than that of the homogeneous complex H(2)L(4). MOFs 5 and 6 contained phosphorescent [Ir(III)(ppy)(2)(dcbpy)]Cl (H(2)L(5)) and [Ru(II)(bpy)(2)(dcbpy)]Cl(2) (H(2)L(6)) (where ppy is 2-phenylpyridine and bpy is 2,2'-bipyridine) and were used in three photocatalytic organic transformations (aza-Henry reaction, aerobic amine coupling, and aerobic oxidation of thioanisole) with very high activities. The inactivity of the parent UiO-67 framework and the reaction supernatants in catalytic water oxidation, CO(2) reduction, and organic transformations indicate both the molecular origin and heterogeneous nature of these catalytic processes. The stability of the doped UiO-67 catalysts under catalytic conditions was also demonstrated by comparing PXRD patterns before and after catalysis. This work illustrates the potential of combining molecular catalysts and MOF structures in developing highly active heterogeneous catalysts for solar energy utilization.     

1,2,4-Triazole functionalized adamantanes: a new library of polydentate tectons for designing structures of coordination polymers

A series of functionalized adamantanes: 1,3-bis(1,2,4-triazol-4-yl)(tr(2)ad); 1,3,5-tris(1,2,4-triazol-4-yl)-(tr(3)ad); 1,3,5,7-tetrakis(1,2,4-triazol-4-yl)adamantanes (tr(4)ad) and 3,5,7-tris(1,2,4-triazol-4-yl)-1-azaadamantane (tr(3)ada) were developed as a new family of geometrically rigid polydentate tectons for supramolecular synthesis of framework solids. The coordination compounds were prepared under hydrothermal conditions; their structures reveal a special potential of the triazolyl adamantanes for the generation of highly-connected and open frameworks as well as structures based upon polynuclear metal clusters assembled with short-distance N(1),N(2)-triazole bridges. Complexes [Cd{L}(2)]A·nH(2)O [L = tr(3)ad, A = 2NO(3)(-) (4), CdCl(4)(2-) (5); L = tr(3)ada, A = CdI(4)(2-) (7)] are isomorphous and adopt a layered 3,6-connected structure of CdI(2) type. [{Cu(3)(OH)}(2)(SO(4))(5)(H(2)O)(2){tr(3)ad}(3)]·26H(2)O (6) is a layered polymer based upon Cu(3)(μ(3)-OH) nodes and trigonal tr(3)ad links. In [Cu(3)(OH)(2){tr(3)ada}(2)(H(2)O)(4)](ClO(4))(4) (8), [Cu(2){tr(3)ada}(2)(H(2)O)(3)](SO(4))(2)·7H(2)O (9) and [Cd(2){tr(3)ada}(3)]Cl(4)·28H(2)O (10) (UCl(3)-type net) the organic tripodal ligands bridge polynuclear metal clusters. Complexes [Ag{tr(4)ad}]NO(3)·3.5H(2)O (11) and [Cu{tr(4)ad}(H(2)O)](ClO(4))(2)·3H(2)O (12) have 3D SrAl(2)-type frameworks with the metal ions and adamantane tectons as topologically equivalent tetrahedral nodes, while in [Cd(3)Cl(6){tr(4)ad}(2)]·9H(2)O (13) the ligands bridge trinuclear six-connected Cd(3)Cl(6)(μ-tr)(4)(tr)(2) clusters. In the compounds [Cd(2){tr(2)ad}(4)(H(2)O)(4)](CdBr(4))(2)·2H(2)O (2) and [Cd{tr(2)ad}(4){CdI(3)}(2)]·4H(2)O (3) the bitopic ligands provide simple links between the metal ions, while in [Ag(2){tr(2)ad}(2)](NO(3))(2)·2H(2)O (1) the ligand is tetradentate and generates a 3D framework.     

Novel eclipsed 2D cadmium(II) coordination polymers with open-channel structure constructed from terephthalate and 3-(2-pyridyl)pyrazole: crystal structures, emission properties, and inclusion of guest molecules

Five new eclipsed two-dimensional (2D) coordination polymers, [[Cd(2)(TPT)(2)L(2)](GM(1))(3/2)(H(2)O)](infinity) (1) (TPT = terephthalate, L = 3-(2-pyridyl)pyrazole, GM(1) = terephthalic acid), [[Cd(TPT)L](GM(2))(H(2)O)(2)]( infinity) (2) (GM(2) = L = 3-(2-pyridyl)pyrazole), [[Cd(TPT)L](GM(3))(1/2)(H(2)O)](infinity) (3) (GM(3) = mesitylene), [[Cd(4)(TPT)(4)L(4)](GM(4))(7/2)](infinity) (4) (GM(4) = tetramethylbenzene), and [[Cd(TPT)L](GM(5))(1/2)](infinity) (5) (GM(5) = naphthalene), have been synthesized and characterized by X-ray diffraction. All the five complexes take the similar eclipsed 2D open-channel framework with different guest molecules included in the cavities of their channels. TGA analysis indicates that the eclipsed open-channel frameworks are thermally stable up to 300 degrees C. The porous property of the 2D framework of 5 was also investigated by the XRPD technique, which indicated that the guest molecules included in the open-channel frameworks are removable and the framework is maintained after the removal of the guest molecules. Moreover, complexes 1-5 also display strong blue emission in the solid state.     

二茂金属共轭大环配体配合物的结构及性质

报道了配体Ｎ－（二茂铁基甲基）－１,４,７－氮杂－９－冠－３（Ｌ１）和Ｎ－（二茂钌基甲基）－１,４,７－氮杂－９－冠－３（Ｌ２）的Ｃｏ（Ⅲ）和Ｆｅ（Ⅲ）配合物１－４的合成及电化学性质,配合物「Ｃｏ（Ⅲ）（Ｌ１）２（ＡｃＯ）２（ＯＨ）」（ＣｌＯ４）（Ｉ）２（１）的晶体结构显示这些配合物具有线型排列的四金属中心结构,电化学研究表明：在这些配合物中,客体金属离子通过分子片断的电子传递作用使二茂金属的金属     

Porous anionic, cationic, and neutral metal-carboxylate frameworks constructed from flexible tetrapodal ligands: syntheses, structures, ion-exchanges, and magnetic properties

A series of coordination polymers with anionic, cationic, and neutral metal-carboxylate frameworks have been synthesized by using a flexible tetrapodal ligand tetrakis[4-(carboxyphenyl)oxamethyl] methane acid (H(4)X). The reactions between divalent transition-metal ions and H(4)X ligands gave [M(3)X(2)]·[NH(2)(CH(3))(2)](2)·8DMA (M = Co (1), Mn (2), Cd(3)) which have anionic metal-carboxylate frameworks with NH(2)(CH(3))(2)(+) cations filled in channels. The reactions of trivalent metal ions Y(III), Dy(III), and In(III) with H(4)X ligands afforded cationic metal-carboxylate frameworks [M(3)X(2)·(NO(3))·(DMA)(2)·(H(2)O)]·5DMA·2H(2)O (M = Y(4), Dy(5)) and [In(2)X·(OH)(2)]·3DMA·6H(2)O (6) with the NO(3)(-) and OH(-) serving as counterions, respectively. Moreover, a neutral metal-carboxylate framework [Pb(2)X·(DMA)(2)]·2DMA (7) can also be isolated from reaction of Pb(II) and H(4)X ligands. The charged metal-carboxylate frameworks 1-5 have selectivity for specific counterions in the reaction system, and compounds 1 and 2 display ion-exchange behavior. Moreover, magnetic property measurements on compounds 1, 2, and 5 indicate that there exists weak antiferromagnetic interactions between magnetic centers in the three compounds.     

Building blocks for coordination polymers: self-assembled cleft-like and planar discrete metallo-macrocyclic complexes

Discrete dinuclear metallo-macrocyclic complexes have been prepared from the flexible amide ligand N-6-[(3-pyridylmethylamino)carbonyl]pyridine-2-carboxylic acid (L1-CH(3)), and its more rigid analogue, N-6-[(3-pyridylamino)carbonyl]pyridine-2-carboxylic acid (L3-CH(3)). With ligands L1-CH(3) and L3-CH(3), discrete dinuclear metallo-macrocyclic complexes with the generic formula [Cu(2)(L1-CH(3))(2)(X)(2)(Y)(2)] (7, X = NO(3); 8, X = Cl, Y = H(2)O; 9, X = ClO(4), Y = CH(3)OH) and [Cu(2)(L3-CH(3))(2)(X)(2)(Y)(2)] (10, X = NO(3), Y = H(2)O; 11, X = ClO(4), Y = CH(3)OH) are obtained. For complexes 7-9, containing the more flexible link L1-CH(3), these complexes are cleft-shaped and hinged at the methylene spacer, which allows the cleft to widen and contract to accommodate different packing modes in the solid-state. In contrast, the rigid link L3-CH(3) gives near planar metallo-macrocyclic structures. These metallo-macrocyclic compounds may be useful building blocks for coordination polymers.     

镍螺旋化合物及其杂银配位聚合物的设计合成与结构

采用两个易扭转异构的双三齿有机配体，双吡啶二甲基-6,6′-二酰肼-2,2′-连吡啶(H₂L¹)和双吡啶二乙基-6,6′-二酰肼-2,2′-连吡啶(H₂L²)，和金属镍离子组装得到2个金属螺旋体(helicate)，Ni₂(HL¹)₂(PF₆)(BF₄)(CH₃OH)(H₂O)₂ (1)和Ni₂(HL²)(H₂L²)(ClO₄)₃(C₂H₅OH)(CH₃OH)H₂O)₃ (2),并测定了它们的晶体结构。同时由配体H₂L³出发,通过逐级组装的方法,得到一个镍-银杂金属的配位聚合物Ni₂Ag₂(HL³)₂(ClO₄)₂(CH₃CN)₃ (3)。单晶结构表明，配位聚合物3中配体H₂L³首先与镍离子组装成分子盒化合物(molecular box)，该结构单元进一步通过Ag离子与分子盒外围N原子配位，使分子盒互相串连成一维配位聚合物3，分子盒聚集体沿c方向伸展成一维链结构，链与链之间相互平行，进一步堆积成二维孔道结构。     

Highly porous and robust scandium-based metal-organic frameworks for hydrogen storage

The metal-organic frameworks NOTT-400 and NOTT-401, based on a binuclear [Sc(2)(μ(2)-OH)(O(2)CR)(4)] building block, have been synthesised and characterised; the desolvated framework NOTT-401a shows a BET surface area of 1514 m(2) g(-1) with a total H(2) uptake of 4.44 wt% at 77 K and 20 bar.     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

A contrivance for a dynamic porous framework: cooperative guest adsorption based on square grids connected by amide-amide hydrogen bonds

Flexible porous coordination polymers containing amide groups as a function origin have been synthesized and categorized as "Coordination Polymer with Amide Groups". Bispyridyl ligands with a spacer of amide group afford two-dimensional (2-D) motifs with a deformed square grid, resulting in three-dimensional (3-D) frameworks of [Co(NO(3))(2)(3-pna)(2)](n)(1), [Co(Br)(2)(3-pna)(2)](n)(2), and [[Co(NCS)(2)(4-peia)(2)].4Me(2)CO](n)(3 subset 4Me(2)CO) (3-pna = N-3-pyridylnicotinamide, 4-peia = N-(2-pyridin-4-yl-ethyl)-isonicotinamide), where the 2-D motifs are bound by complementary hydrogen bond between the amide groups. In the case of the 3 subset 4Me(2)CO, the amide groups form a contrivance for a dynamic porous framework because of their relevant position and orientation in the mutual nearest neighboring motifs. Consequently, 3 subset 4Me(2)CO shows amorphous (nonporous)-to-crystal (porous) structural rearrangement in the Me(2)CO adsorption and desorption process, where the framework of the 2-D motif is maintained. The adsorption isotherm has threshold pressure (P(th)), a sort of gate pressure. The heat of Me(2)CO adsorption (DeltaH(ad) = -25 kJ/mol) is obtained from the temperature dependence of threshold pressure (P(th)), which is close to acetone vaporization enthalpy (DeltaH(vap) = 30.99 kJ/mol).     

Pt nanoparticles@photoactive metal-organic frameworks: efficient hydrogen evolution via synergistic photoexcitation and electron injection

Pt nanoparticles of 2-3 nm and 5-6 nm in diameter were loaded into stable, porous, and phosphorescent metal-organic frameworks (MOFs 1 and 2) built from [Ir(ppy)(2)(bpy)](+)-derived dicarboxylate ligands (L(1) and L(2)) and Zr(6)(μ(3)-O)(4)(μ(3)-OH)(4)(carboxylate)(12) secondary building units, via MOF-mediated photoreduction of K(2)PtCl(4). The resulting Pt@MOF assemblies serve as effective photocatalysts for hydrogen evolution by synergistic photoexcitation of the MOF frameworks and electron injection into the Pt nanoparticles. Pt@2 gave a turnover number of 7000, approximately five times the value afforded by the homogeneous control, and could be readily recycled and reused.