溶剂对呋喃二羧酸与Mn(Ⅱ)自组装的结构调控

以呋喃二羧酸 (H2FDC) 与 Mn(II) 为研究对象,通过改变溶剂体系分别得到了化合物 Mn(FDC)(H2O)3 (1) 和化合物 [NH4]2?[Mn3(FDC)4]?2DMF?2H2O (2). 呋喃二羧酸与 Mn(II)在DMF与水的混合溶剂中形成了具有一维链状结构的化合物1,而在DMF溶剂中则形成了具有三维开放结构的化合物2,这反应了溶剂对产物结构具有重要的影响. 变温磁化率测试及量子蒙特卡洛方法拟合都表明化合物1和2 都表现为反铁磁性.     

溶剂对镍（域）金属有机骨架结构的影响

通过乙酸镍和4-咪唑-1-基-苯甲酸( HL)在不同溶剂热条件下合成了3个新型金属有机骨架化合物[Ni(L)2]n·DMF(1), Ni(H2 O)2(L)2(2)和 Ni(L)2(CH3 OH)2(3)。化合物1是用 N,N-二甲基甲酰胺(DMF)作为溶剂合成的具有菱形孔道的三维骨架化合物;化合物2是在DMF/H2O(体积比4︰1)中合成的水作为终端配体参与配位的二维层状化合物,并通过层与层之间的氢键作用构筑形成了三维超分子结构;当溶剂为甲醇时,得到了二维层状化合物3,且甲醇作为终端配体参与配位。磁学和电化学性质研究结果表明,化合物1~3中相邻镍离子之间存在反铁磁相互作用;在一定的电势范围内出现一对明显的Ni (Ⅱ)/Ni(Ⅲ)氧化还原峰,表明化合物1~3是潜在的磁性材料或电催化剂材料。     

溶剂对镍(Ⅱ)金属有机骨架结构的影响

通过乙酸镍和4-咪唑-1-基-苯甲酸(HL)在不同溶剂热条件下合成了3个新型金属有机骨架化合物[Ni(L)_2]n·DMF(1),Ni(H_2O)_2(L)_2(_2)和Ni(L)_2(CH_3OH)_2(3).化合物1是用N,N-二甲基甲酰胺(DMF)作为溶剂合成的具有菱形孔道的三维骨架化合物;化合物_2是在DMF/H_2O(体积比4∶1)中合成的水作为终端配体参与配位的二维层状化合物,并通过层与层之间的氢键作用构筑形成了三维超分子结构;当溶剂为甲醇时,得到了二维层状化合物3,且甲醇作为终端配体参与配位.磁学和电化学性质研究结果表明,化合物1~3中相邻镍离子之间存在反铁磁相互作用;在一定的电势范围内出现一对明显的Ni(Ⅱ)/Ni(Ⅲ)氧化还原峰,表明化合物1~3是潜在的磁性材料或电催化剂材料.     

基于对叔丁基杯[8]芳烃的3d-5f核簇化合物(M_xTh_y,M=Co、Ni、Zn)的合成、结构与磁性研究(英文)

本文以对叔丁基杯[8]芳烃(H8C8A)为配体,在溶剂热条件下制得了3个3d-5f化合物,[Co2Th4(HC8A)2O2(OH)2(DMF)6](1)、[Ni2Th5(H2C8A)(C8A)O4(OH)2(DMF)5(CH3OH)2](2)、[Zn2Th6(HC8A)(C8A)O5(CH3O)(C3H6NO2)2(DMF)5(CH3OH)](3)(其中H8C8A=对叔丁基杯[8]芳烃,DMF=N,N-二甲基甲酰胺)。X-射线单晶测试表明,这3个化合物均为2个以尾对尾方式排列的杯[8]芳烃分子中间夹1个3d-5f核簇的三明治型结构。杯[8]芳烃均表现为双锥式构型,且每个锥式空腔下缘结合1个钍离子,双锥的连接处及2个杯芳烃分子之间由过渡金属离子或钍离子连接。不同过渡金属离子不同的配位环境导致3种不同核簇的形成。化合物1的磁性研究表明,该化合物在低温下表现出弱铁磁性相互作用。     

系统研究溶剂和温度对形成三种钴簇基金属-有机框架化合物的影响：结构和气体吸附性质

通过调控DMSO/DMF/H2O混合溶剂中溶剂成分的物质的量比和反应温度,合成出3种基于1,3,5-三(4′-羧甲基苯基)苯(H3BTB)和氯化钴的钴簇基金属-有机框架化合物(NH2Me2)2[Co3O(BTB)2(H2O)].2H2O.4.5DMF.7.5DMSO(1),(NH2Me2)2[Co4O(BTB)8/3].6H2O.13DMSO(2)和(NH2Me2)2[Co6O3(BTB)8/3(H2O)4].5H2O.5DMF.13DMSO(3),它们分别含有三核Co3O簇、四核Co4O簇和六核Co6O3簇。这种六核簇为我们首次发现。研究表明,相对中等的温度105℃和较多DMF的使用有利于三核簇的形成;125℃高温和溶剂DMSO有利于四核簇的构建;与形成1的条件相比,较低的温度95℃和更多水的存在则有利于六核簇的生成。2和3虽然由不同的金属簇构成,但具有相同的框架结构,Schlfli符号为(43)8(48.64.812.104)3。此外,还研究了2和3抽出溶剂后产物的气体吸附性质,它们均具有较高的氢气吸附焓。     

三氮唑取代杯[4]芳烃配位聚合物的合成与荧光性能

利用四[1-(1, 2, 4-三氮唑基)甲基]间苯二酚杯[4]芳烃配体(TTR4A)在溶剂热的条件下合成了两个配位聚合物,[[Zn₂(TTR4A)(L)₂]·DMF·4H₂O]_n(化合物1) (DMF = N, N-二甲基甲酰胺)和[[Co(TTR4A)Cl₂]·DMA·H₂O]_n (化合物2) (H₂L = 4, 4’-联苯二甲酸) (DMA = N, N-二甲基乙酰胺)。通过单晶X射线衍射方法对这两个配位聚合物的结构进行了确定。利用红外、元素分析、粉末X射线衍射(PXRD)和热重表征手段对化合物1和2进行了表征。在化合物1中,四个L配体连接着四个Zn(Ⅱ)离子形成了环状的Zn₄L₄结构单元,该结构单元进一步地被TTR4A链接形成了一维链状结构。在化合物2中,TTR4A的四个三氮唑基团各连接一个Co(Ⅱ)离子形成二维层状结构。此外,我们对化合物1的荧光性能进行了研究,荧光测定表明固态条件下化合物1发出很强的荧光,并能够选择性地对Fe³⁺、Cr₂O₇²⁻和硝基苯分子产生响应。     

[2, 3'-联-1H-吲哚]-3(2H)-酮类化合物的单重态氧反应

[2, 3'-联-1H-吲哚]-3(2H)-酮衍生物(1a~1c)在甲醇中的单重态氧反应给出溶剂捕捉产物4, 后者在分离过程中脱去甲醇分子生成5。考察了标题化合物分子中二氢吲哚酮结构单元以及吲哚结构单元在单重态氧反应中的作用, 并探讨了反应机理。     

以三乙烯二胺为配体的过渡金属配位化合物合成、晶体结构及荧光性质研究

采用混合溶剂热法合成出一系列以三乙烯二胺(简写dabco)为配体的新型过渡金属配位化合物[CdCl3H(dabco)2](1)、[CoCl3Hdabco](2)、[NiCl2(H2O)3Hdabco]Cl(3)和[CuCl3H(dabco)2]Cl·H2O(4)。对该系列化合物进行了元素分析、红外光谱以及热重分析表征,并通过X射线单晶衍射分析确定出晶体结构。结构解析表明:化合物1具有一维直链状分子结构;化合物2具有一维左螺旋状分子结构,化合物3具有一维右螺旋链状分子结构;化合物4具有二维平面网格状分子结构。对该系列化合物的荧光光谱研究结果表明,化合物1~4均具有较好的荧光性质。     

金属离子导向合成两个金属配位聚合物:晶体结构和荧光性质（英文）

以2,5-呋喃二羧酸和六水硝酸锌/四水硝酸镉为原料,在溶剂热条件下,合成出2个金属有机配位聚合物,[Zn(FDC)(DMF)2]n(1)和{(Me2NH2)2[Cd2(FDC)3(H_2O)2]·4H_2O}n(2)(H2FDC=2,5-呋喃二甲酸,DMF=N,N-二甲基甲酰胺)。通过元素分析、红外光谱、差热分析、X射线粉末衍射和X射线单晶衍射等手段对配合物进行了结构表征。结果显示,化合物1为一维链结构,通过分子间氢键作用构筑成二维结构;而2为二维(4,4)网络结构。热稳定性表明化合物1脱去DMF配体后稳定到300℃;而2脱去配体水、阴离子和溶剂分子后结构立即发生坍塌。常温固态下,激发波长分别为303和350 nm时考察了配合物1和2的荧光性质,结果显示2个化合物均发射蓝色荧光(λmax=406,470 nm),荧光寿命分别为76.2和138.1 ns。     

三维超分子配合物[MoO_2(OCH_2C_5H_4N)_2]制备、晶体结构及三阶非线性光学性质

Na_2MoO_4·2H_2O和2-氯甲基吡啶在水中反应得到了超分子化合物：[MoO_2 (OCH_2C_5H_4N)_2]。其单晶结构测试表明：该化合物含有两种均为6配位的但化学 环境不同的Mo(1)和Mo(2)原子;由此两种钼原子构成的中性配合物[Mo(1)O_2 (OCH_2C_5H_4N_2)]和[Mo(2)O_2(OCH_2C_5H_4N)_2]分别通过氢键O…H-C及吡啶环 间的π-π堆积作用形成了二维的A层和B层,A层与B层之间又在层间氢键的作用下 交错形成了三维的网状固态结构。用Z-scan法在DMF溶液中测试了该化合物的三阶 非线性光学性能,发现它有强的非线性吸收(α_2 = 1.92 * 10~(-9) m·W~(-1)) ,非线性极化率X~((3)) = 1.21 * 10~(-12) esu。     

A series of octanuclear-nickel(II) complexes supported by thiacalix[4]arenes

A series of discrete complexes, [Ni(8)(BTC4A)(2)(μ(6)-CO(3))(2)(μ-CH(3)COO)(4)(dma)(4)]·H(2)O (1), [Ni(8)(BTC4A)(2)(μ(6)-CO(3))(2)(μ-Cl)(2)(μ-HCOO)(2)(dma)(4)]·2DMF·2CH(3)CN (2), [Ni(8)(PTC4A)(2) (μ(6)-CO(3))(2)(μ-CH(3)COO)(4)(dma)(4)]·DMF (3), and [Ni(8)(PTC4A)(2)(μ(6)-CO(3))(2)(μ-OH)(μ-HCOO)(3) (dma)(4)] (4) (p-tert-butylthiacalix[4]arene = H(4)BTC4A, p-phenylthiacalix[4]arene = H(4)PTC4A, dma = dimethylamine, and DMF = N,N'-dimethylformamide), have been prepared under solvothermal conditions and structurally characterized by single-crystal X-ray diffraction analyses, powder XRD, and IR spectroscopy. These four complexes are stacked by dumbbell-like building blocks with one chairlike octanuclear-nickel(II) core, which is capped by two thiacalix[4]arene molecules and connected by two in situ generated carbonato anions and different auxiliary anions. This work implied that not only the solvent molecules but also the upper-rim groups of thiacalix[4]arenes have significant effects on the self-assembly of the dumbbell-like building blocks. The magnetic properties of complexes 1-4 were examined, indicating strong antiferromagnetic interactions between the nickel(II) ions in the temperature range of 50-300 K.     

苄连氮桥联双硫杂杯[4]芳烃的合成

硫杂杯[4]二醛基衍生物(1)在水合肼中肼解,合成了新化合物硫杂杯[4]二醛腙基衍生物(2);1和2在弱酸的催化下反应合成了新的具有对称结构的苄连氮双硫杂杯[4]芳烃(3);2和3的结构经1H NMR,IR,ESI-MS和元素分析表征.     

Syntheses and structures of mono-, di- and tetranuclear rhodium or iridium complexes of thiacalix[4]arene derivatives

The reactions of [Cp*MCl2]2(Cp*=eta5-C5Me5, M = Rh, Ir) with thiacalix[4]arene (TC4A(OH)4) and tetramercaptothiacalix[4]arene (TC4A(SH)4) gave the mononuclear complexes [(Cp*M){eta3-TC4A(OH)2(O)2}] and the dinuclear complexes [(Cp*M)2{eta3eta3-TC4A(S)4}] respectively, while the analogous reactions with dimercaptothiacalix[4]arene (TC4A(OH)2(SH)2) produced the tetranuclear complexes [(Cp*M)2(Cp*MCl2)2-{eta3eta3eta1eta1-TC4A(O)2(S)2}].     

含噻二唑官能基的对叔丁基硫桥杯[4]芳烃衍生物的合成及结构

以对叔丁基硫桥杯[4]芳烃(1)为原料, 在碳酸钾存在下与碘甲烷反应, 生成1,3-二取代桥杯[4]芳烃(2), 其分别与1,2-二溴乙烷, 1,3-二溴丙烷在碳酸钾的存在下进行烷基化反应, 生成硫桥杯[4]芳烃衍生物3和4. 在氢氧化钠存在下,其与过量的含不同官能团的2-巯基-1,3,4-噻二唑反应, 生成下缘含1,3,4-噻二唑基的硫桥杯[4]芳烃衍生物5a, 5b, 6a和6b, 并通过了¹H NMR, ¹³C NMR, IR, MS和元素分析的确证. 同时, X射线分析确定了硫桥杯[4]芳烃3和5a的晶体结构.     

Comparative study on the transition metal complexes of a novel thiacalix[4]arene derivative

A comparative study on Zn²⁺ and Cu²⁺ complexes of the novel compound 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene, that possesses potential as a core unit for the construction of molecular receptors, is presented using semiempirical AM1 calculation. The possible structures of each metal complex and their corresponding energetic data are compared with the parent 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The complexation ability of both thiacalix[4]arenes towards the two metal ions is discussed on the basis of binding energies. Both thiacalix[4]arene 1:1 complexes show higher complexation ability towards Cu²⁺. However, 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene presents lower complexation ability when compared with the 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The results of liquid–liquid extraction experiments of the thiacalix[4]arenes are in good agreement with the theoretical calculations.     

Second-sphere coordination in the complex [Mn(H2O)6]2[thiacalix[4]arene tetrasulfonate]

The title calixarene, dimanganese thiacalix[4]arene tetrasulfonate, was prepared and its crystal structure was determined. [Mn(H₂O)₆]₂[thiacalix[4]arene tetrasulfonate]·0.5H₂O crystallizes in the monoclinic system, P2(1)/m space group, with a=13.014 (6), b=14.146 (9), c=13.184 (7) Å, β=113.307 (10)°, V=2229 (2) Å³ and Dc=1.710 gcm⁻³, Z=2. The title calixarene exists in the solid state as bilayer structure. The hydrophobic organic layer consists of thiacalix[4]arene tetrasulfonate in an up-down fashion, whereas, the hydrophilic inorganic layer consists of hexaaquamanganese (II) which is linked to the former through a second-sphere coordination.     

Thiacalix[4]arene derivatives as radium ionophores: a study on the requirements for Ra2+ extraction

The synthesis and NOE-based structural characterization is described of thiacalix[4]arene tricarboxylic acid (7), thiacalix[4]crown-5 and -6 monocarboxylic acids (2 and 5), and the bis(N-methylsulfonyl)thiacalix[4]crowns-5 and -6 (4a,b). The 226Ra2+ selectivity coefficients, log(K(Ra)ex/K(M)ex), of the new thiacalix[4]arene derivatives are compared directly with those of thiacalix[4]crown-5 and -6 (1a,b), thiacalix[4]crown-5 and -6 dicarboxylic acids (3a,b), and thiacalix[4]arene di- and tetracarboxylic acids (6 and 8). Thiacalix[4]arene dicarboxylic acid (6) already exhibits a high 226Ra2+ selectivity, but this is significantly improved in the case of 3b, having an additional crown-(6-)ether bridge. The covalent combination of a crown ether and carboxylic acid substituents as in the thiacalix[4]arenes 2,3a,b,4a,b, and 5 gives a better 226Ra2+ selectivity in the presence of Sr2+ or Ba2+ than mixtures of dibenzo-21-crown-7 and thiacalix[4]arene dicarboxylic acid (6) or of pentadecanoic acid and thiacalix[4]crown-6 (1b).     

系列新型硫杂杯[4]芳烃氮杂衍生物的合成

在对叔丁基硫杂杯[4]芳烃的下缘1,3位引入芳醛基, 合成了硫杂杯[4]二醛基衍生物2. 化合物2与苯胺、水杨酰肼、烟酰肼、异烟酰肼等通过席夫碱缩合反应得到新型硫杂杯[4]氮杂衍生物3a～3d, 产率分别为83%, 80%, 77%和79%. 化合物2与邻苯二胺、乙二酰肼、丙二酰肼、己二酰肼等通过“1＋1”分子间缩合得到新型1,3-桥联硫杂杯[4]氮杂衍生物4a～4d, 产率53%, 51%, 59%和66%. 新化合物的结构经IR, ¹H NMR, MS和元素分析等证实.     

Thiacalix[4]arene based reconfigurable molecular switches: set-reset memorized sequential device

The fluorescent chemosensors 3, 5 and 7 based on thiacalix[4]arene bearing naphthyl groups have been designed and synthesized. The optical chemosensor 3 based on a thiacalix[4]arene of cone conformation behaves as "turn-on" optical chemosensor for Fe(3+) and F(-) ions. However, chemosensors 5 and 7 based on a thiacalix[4]arene of 1,3-alternate conformation demonstrate "turn-on" optical behaviour for Hg(2+), F(-) ions (with receptor 5 as turn-on for K(+) ions also) and "turn-off" behaviour for Fe(3+) ions. The simultaneous presence of Fe(3+) and Hg(2+) or K(+) or F(-) ions results in formulation of reversible "on-off" switches. Various molecular logic gates developed in response to molecular switching between these chemical inputs have been integrated into sequential logic circuits with memory function in a feedback loop which mimics "set-reset" molecular level information processing device.