氯化聚氯乙烯／环氧树脂共混体的流变性质及形态

氯化聚氯乙烯(CPVC)具有优良的物理性能。但须严格控制加工温度,加工熔体粘度较大。近年,作者曾对CPVC与氯化聚乙烯(CPE)和丙烯酸酯共聚物(ACR)共混体的流变性质进行了研究。本文首次研究CPVC与环氧树脂(EP)共混体的流变性质与形态。     

氯化聚氯乙烯/氯化聚乙烯共混体的流变性能

<正> 氯化聚氯乙烯(CPVC)是聚氯乙烯(PVC)的氯化产物。它具有优良的耐化学腐蚀、耐油、隔氧等性能。它的使用温度、抗张和弯曲强度与PVC相比有很大提高。这些特性加上氯元素资源丰富、价格便宜,使CPVC可望成为具有吸引力的热塑性工程塑料。有关CPVC共混体系的研究已有不少报道。然而多数的研究范围较窄,尤其是关于CPVC共混体系流变性研究很少见。本文首次广泛研究了不同组成的CPVC/CPE共混     

HQ-PPEK/PC共混物的相容性与流变性

聚芳醚酮;聚碳酸酯;共混物;流变性能;HQ-PPEK/PC共混物的相容性与流变性     

EVA／PP共混体流变性研究

采用孟山都加工性能测试仪，测试了ＥＶＡ／ＰＰ共混体的流变性能。结果表明在２１０－２５０℃及剪切速率为６０—３×１０３／Ｓ的范围内，添加ＥＶＡ组分使共混物熔体的粘度增加，该熔体属于假塑性非牛顿流体。在剪切速率及温度较高的情况下，共混物表观粘度与组成的关系符合ｉｇηａ＝Ｗ１ｌｇη１ａ＋Ｗ２ｌｇη２ａ表示了混合律，共混物表观粘度与温度的关系符合Ａｒｒｈｅｎｉｕｓ方程。     

嵌段共聚物熔体流变行为研究进展

微相分离的结构特点赋予了嵌段共聚物很多优异的性能,使其广泛应用于汽车部件及工具手柄、电线电缆包皮或绝缘带、医疗制品及食品容器、密封胶、粘合剂、涂料以及聚合物共混改性等领域。聚合物流变特性直接关系到材料加工参数的选择以及产品最终性能,是聚合物结构设计、材料加工参数优化选择及拓展产品应用领域的理论基础。本文对嵌段共聚物的熔体流变行为进行了综述,着重介绍了与嵌段共聚物特殊结构相对应的流变特性,以及流变特性与相行为之间的关联,并提出了嵌段共聚物熔体流变行为研究的前沿与重点。     

苯乙烯-马来酸酐共聚物增容Nylon-6/ABS共混体系的形态和力学性能

通过熔融共混法制备了苯乙烯-马来酸酐共聚物(SMA)增容的尼龙6(Nylon-6)/ABS共混物.采用TEM、SEM、FTIR等研究了SMA增容的Nylon-6/ABS共混物的相形态与性能.发现在Nylon-6和ABS的简单共混体系中,分散相易聚集,相界面清晰,断裂面光滑,呈脆性断裂,相容性差.加入少量SMA后,共混物由共连续相结构转变为典型的"海-岛"结构,分散相分布均匀,界面粘接程度增加,表明SMA对Nylon-6/ABS体系有显著的增容效果.     

用FTIR研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用溶液法得到线形多嵌段聚氨酯（PU）与聚氯乙烯（PV）、氯化聚氯乙烯（CPVC）的共混物。用FTIR研究PU/PVC、PU／CPVC共混物的相容性，发现PVC、CPVC的加入破坏了PU中原来的氢键，并且PU中的炭基（C=0）与PVC、CPVC中的α－H形成了新的氢键，因而说明了PU／PVC、PU／CPVC共混物具有良好的相容性。     

油焦浆流变特性的研究

利用减压不同和石油焦制备成浆体燃料,然后考察了其流变性及温度、浓度和原料油对流变性的影响。结果表明,浆体为屈服假塑性流体并具有触变性,屈服应力值和粘度随着温度升高、浓度的降低而减小。原料油中的胶质和沥青质组分对浆体的流变特性和度有很大的影响,含有较多的胶质和沥青质原料油的浆体表现出更强的屈服假塑性和更高的粘度。     

聚合物体系拉伸流变行为的表征及研究进展

聚合物的拉伸流动在吹膜、纺丝、热成型等加工中扮演着支配的角色,因此掌握聚合物熔体在拉伸条件下的流动行为对于控制和预测其加工性能具有重要意义。相对于剪切流动,拉伸粘度对于大分子的结构、填充粒子的各向异性、共混物中两相的结构等更加敏感。本文简要介绍了当前用于拉伸流变研究的常用装置及其原理,并举例描述了单一组分聚合物、聚合物纳米复合材料和聚合物共混物等体系拉伸流变研究的现状和成果,最后指出了当前拉伸流变研究领域存在的一些不足之处并进行了展望。     

酸酐化聚砜对聚砜/液晶聚合物共混物的界面增容作用

首先合成了马来酸酐接枝改性聚砜.改性后聚砜材料的表面张力增大,其中的极性分量增加明显,并以此增容聚砜/液晶聚合物(VectraB950)为原位复合体系,研究了增容前后共混物的加工流变行为和界面性能.结果表明,酸酐化聚砜可增强聚砜与液晶聚合物之间的界面作用,引起共混物加工粘度的上升;漫反射FTIR研究表明,增容后共混体系中的特殊相互作用增大;XPS和PLM的研究表明,在熔融加工过程中改性聚砜与液晶聚合物组分之间存在一定的界面化学反应,并生成了接枝共聚物.共混物相容性的提高应归结于相间化学反应与物理作用共同作用的结果.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.