新型聚芳醚酮与热致性液晶高聚物共混物流变性能和力学性能的研究

 本文研究了新型聚芳醚酮与热致性液晶高聚物(PEK-C/LCP)共混物的流变性能及力学性能。结果表明:由于LCP的加入,PEK-C的熔体粘度降低;随着剪切速率的增加,共混物熔体流动活化能从223.5KJ/mol降为102.2KJ/mol。共混物的玻璃化转变温度从纯PEK-C的218℃降为199℃;除模量增加外,其它力学性能均有所下降。同时利用SEM观察了共混物冲击断面形貌,未发现有LCP微纤维生成。     

多组份聚丙烯共混物的微观结构及共混纤维的染色性能

研究了PP GPET、PP GPET EVA、PP GPET EVA PS共混物的结构和性能 .研究表明 ,PP GPET体系属于非相容共混体系 ,共混物呈典型海岛型两相结构 ,EVA的加入可以改善体系相容性 ;共混物的结晶度比纯聚丙烯低 ,PS有增大共混物晶粒尺寸的作用 ;改性聚丙烯纤维的染色性有明显提高 ,用分散染料E EX可染成深蓝色     

对羟基苯甲酸(PHB)聚对苯二甲酸乙二酯(PET)液晶共聚酯和聚对苯二甲酸乙二酯共混物的酯交换表征

在温度280℃附近对含有液晶共聚酯P-Hydroxy Benzoic Acid/Poly(-Ethylene Terephthalate-)PHB/PET和Poly(-Ethylene Terephthalate-)PET的共混样品进行热处理时,发现共混物的熔点随热处理的时间增加而不断降低,热处理温度越高,相同时间内共混物熔点下降程度越大;而具有相同热历史的纯PET样品熔点几乎保持不变.通过NMR方法证实了PHB/PET-TET共混物熔点随热处理时间下降是由于PHB/PET和PET之间发生了酯交换反应.所以可根据共混物的宏观热性质和PHB/PET序列结构变化表征PHB/PET和PET共混物之间的酯交换程度.     

梳型聚醚-聚磺酸锂共混物的锂离子导电性

 本工作合成了聚甲基丙烯酸齐聚氧化乙烯酯和聚甲基丙烯酸己磺酸锂两系列聚合物,研究共聚物结构对共混物的相容性和锂离子导电性的影响.结果表明,共混物的相容性是决定离子电导率的主要因素;共混物内锂离子传导发生在非晶区,聚合物的链段运动是离子传导的主要推动力.     

聚合物共混：Ⅰ.聚合物共混物的制备方法

本讲主要介绍聚合物共混物的制备方法,其中包括熔融共混、溶液共混、胶乳共混、冷冻干燥共混、接技共聚共混、互穿聚合物网络、就地反应型共混、分子共混等.     

离聚物共混研究进展

综述了十 多年来。人们旨在提高相容性及其它一些性能，将离聚物引人共混体系所展开的系列研究。总结出，离聚物共混体系中，离聚物起增容作用的根本原因是在共混休整 系中引入了一些特殊的离子相互作用：离子－离子作用，离子－偶极作用，过渡金属离子的配位作用，介绍了目前研究离聚物共混的主要方法。     

环氧树脂／酚酞聚醚醚砜共混物的相行为

酚酞聚醚醚砜(PES-c)同未交联的双酚A二缩水甘油醚(DGEBA)环氧树脂的共混物呈单一的玻璃化转变温度,其相容性主要归因于混合熵的贡献。PES-C同交联的环氧树脂之间的相容性与所用的固化剂有关。以胺类作DGEBA的固化剂时,共混物不发生相分离;以酸酐作固化剂时,共混物发生相分离。     

聚酰胺／聚醚砜共混物双连续相的形成

聚酰胺／聚醚砜共混物双连续相的形成＊卜文胜曾继军何嘉松＊＊（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词共混物，两相共连续两相共连续指组成二元不相容聚合物共混物的两相完全连续，是一种特殊的形态结构。这种结构对共混物的物理机械性能...     

离聚物及其共混体系的研究3.基于配位络合的增容作用

通过将苯乙烯(S)与少量的甲基丙烯酸(MAA)或马来酸酐(MA)共聚及甲基丙烯酸正丁酯(nBMA)与4-乙烯基吡啶(4-VP)共聚,从而在聚苯乙烯(PS)及聚甲基丙烯酸丁酯(PBMA)链上分别引入了功能基团羧酸基(-CO-OH)、酸酐基(-CO-O-CO-)和吡啶基(-N)。通过与锌盐作用获得相应的离聚物(Ionomer)。用红外光谱(IR)表征了共聚物和离聚物的形成;差热分析(DSC)测定共聚物、离聚物和共混物的玻璃化转变温度(Tg)。研究结果表明,随着共聚物中功能基团含量的增加或者共聚物形成离聚物后,其玻璃化转变温度(Tg)提高了;而共聚物的共混物因羧酸基与吡啶基间的质子转移作用而提高了相容性。特别是在引入Zn~(2+)的共混物中,增容作用十分明显,这可归结于BMAVP中的吡啶基和SMAA-Zn~(2+)(或SMA-Zn~(2+))中的Zn~(2+)间的配位络合作用的贡献。     

含液晶离聚物共混体系的研究进展

液晶离聚物(liquid crystalline ionomers,LCIs)是一种具有液晶性能的离聚物,也可以说是带有离子基团的液晶聚合物.将液晶离聚物与其它热塑性聚合物熔融共混时,其既能起到液晶聚合物的高模量、高强度作用,同时也具有离子的增容剂作用.本文论述了液晶离聚物在共混体系中的研究进展.按照液晶离聚物所含离子的不同,论述了含有-COOH,-SO3H和≡N+ 的液晶离聚物对共混体系的增容和增强作用.考察了液晶离聚物对共混体系热力学性能、形态结构和力学性能的影响.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.