聚苯胺共价接枝碳纳米管负载Pt催化剂的制备及对甲醇电催化性能的研究

以氨基化的碳纳米管为基体,通过界面聚合方法将聚苯胺共价接枝于碳纳米管表面,负载催化剂颗粒Pt. 通过透射电镜(TEM)、X射线衍射(XRD)及电化学方法对催化剂进行了表征. TEM结果表明通过界面聚合的方法可以使聚苯胺均匀地接枝于碳纳米管表面. 电化学测试结果表明,碳纳米管共价接枝聚苯胺作为载体可以提高催化剂的抗CO中毒性能,有利于对甲醇的催化氧化. 研究其对甲醇的催化活性,并与商业的JM(Pt/C)催化剂进行了对比. 结果表明,碳纳米管共价接枝聚苯胺,有效提高了催化剂的稳定性,延长催化剂的寿命.     

有机化学接枝-电化学沉积聚合制备CNTs/PANI纳米复合材料

通过有机化学合成法先在碳纳米管表面接枝上苯胺单体,然后在不锈钢电极表面在硫酸溶液中采用循环伏安法电化学沉积聚合制得碳纳米管/聚苯胺(CNTs/PANI)纳米复合材料.扫描电子显微镜和傅立叶变换红外光谱表征所得材料的微观结构和基团,循环伏安和恒流充放电测试用于考察所得CNTs/PANI纳米复合材料的电化学性能.所得结果与...     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

基于碳纳米管－聚苯胺纳米复合物的超级电容器研究

为了提高碳纳米管的比容, 采用化学原位聚合的方法在碳纳米管的表面包覆聚苯胺, 制备碳纳米管-聚苯胺纳米复合物. 运用TEM和IR对样品进行了表征. 通过循环伏安研究样品的电化学特性. 利用恒流充放电考察基于碳纳米管-聚苯胺复合物超级电容器的性能. 在相同实验条件下, 对碳纳米管进行了比较分析. 实验结果表明, 在电流密度为10 mA/cm²时, 碳纳米管和碳纳米管-聚苯胺复合物的比容分别为52和201 F/g. 基于碳纳米管-聚苯胺纳米复合物的超级电容器的能量密度达到6.97 Wh/kg, 并且具有良好的功率特性.     

有限域聚合法制备碳纳米管-聚苯胺复合材料及其电化学性能

通过有限域聚合法将聚苯胺(PANI)均匀地生长在碳纳米管(CNTs)表面, 得到CNTs-PANI纳米复合材料. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、傅立叶变换红外(FTIR)光谱对样品的形貌及成分进行表征. 将得到的复合材料组装成电化学超级电容器, 进行电化学的循环伏安和恒流充放电测试. 结果显示, 运用此有限域聚合法所制备的复合材料中PANI 可以非常均匀地包裹在CNTs表面, 复合材料的比容量可以达到117.7 F·g-1(有机电解液), 远远高于所用纯碳纳米管(25.0 F·g-1)和纯聚苯胺(65.0 F·g-1)的比容量, 从而表明有限域聚合法是一良好的纳米复合材料的制备方法.     

碳纳米管聚(3′,4′-亚乙基二氧-2,2′:5′,2″-三噻吩)复合材料的制备及其电化学性能研究

通过Stille反应合成了3′,4′-亚乙基二氧-2,2′:5′,2″-三噻吩(TET),并以其作为单体,采用化学氧化原位聚合方法在碳纳米管(CNT)的表面包覆新型聚(3′,4′-亚乙基二氧-2,2′:5′,2″-三噻吩)(PTET),制备了PTET-CNT纳米复合材料.通过TEM、SEM和IR对其进行了表征,并利用循环伏安、交流阻抗、恒电流充放电等电化学测试方法,比较研究了复合材料以及碳纳米管在0.1 mol/L四乙基四氟硼酸铵(Et4NPF4)的乙腈溶液中的电化学行为.实验结果表明,在电流密度为3 mA/cm2时,PTET-CNT复合材料的比电容为86 F/g,比原碳纳米管比电容20 F/g提高了3.3倍.基于这种复合材料的电容器的能量密度达到2.02 Wh/kg.     

接枝聚苯乙烯/多壁碳纳米管纳米复合材料制备及合成机理

通过原位悬浮聚合的方法, 以过氧化苯甲酰(BPO)做引发剂, 制备了聚苯乙烯/多壁碳纳米管(MWNT-g-PS)纳米复合材料, 复合材料在水和乙醇中均表现出良好的分散性及稳定性. 通过高倍透射电镜(HRTEM)、场发射扫描电镜(FESEM)分析, 多壁碳纳米管上包覆有1～3 nm的聚苯乙烯膜, 并分布有半径从几十纳米到几百纳米不等的聚苯乙烯微球. 通过傅立叶变换红外光谱(FTIR)、拉曼光谱(Raman spectroscopy)、X光电子能谱(XPS)和热重分析(TGA)对复合材料进行分析, 结果表明, 自由基将多壁碳纳米管表面π键打开, 形成一种新的自由基, 引发聚苯乙烯的自由基聚合, 形成了接枝聚苯乙烯/多壁碳纳米管纳米复合材料.     

碳纳米管-聚(3',4'-亚乙基二氧-2,2':5',2"-三噻吩)复合材料的制备及其电化学性能研究

通过Stille反应合成了3',4'-亚乙基二氧-2,2':5',2"-三噻吩(TET),并以其作为单体,采用化学氧化原位聚合方法在碳纳米管(CNT)的表面包覆新型聚(3',4'-亚乙基二氧.2,2':5',2"-三噻吩)(FTET),制备了PTET-CNT纳米复合材料.通过TEM、SEM和IR对其进行了表征,并利用循环伏安、交流阻抗、恒电流充放电等电化学测试方法,比较研究了复合材料以及碳纳米管在0.1 mol/L四乙基四氟硼酸铵(Et_4NPF_4)的乙腈溶液中的电化学行为.实验结果表明,在电流密度为3 mA/cm~2时,PTET-CNT复合材料的比电容为86 F/g,比原碳纳米管比电容20 F/g提高了3.3倍.基于这种复合材料的电容器的能量密度达到2.02 Wh/kg.     

聚氨酯接枝多壁碳纳米管的制备及表征

采用两步法成功地将聚氨酯分子链以共价键连接到碳纳米管表面. 首先将聚丙烯酰氯通过与强酸氧化后多壁碳纳米管表面产生的羟基及少量羧基之间的化学反应共价接枝到碳纳米管表面; 然后将接枝到碳纳米管表面的聚丙烯酰氯与端羟基聚氨酯发生酯化反应, 实现了聚氨酯对碳纳米管的表面共价接枝. 采用傅里叶变换红外光谱(FTIR)、透射电镜(TEM)、扫描电镜(SEM) 和热重分析(TGA)等对接枝后的产物进行了表征, 结果表明, 聚氨酯已共价接枝到碳纳米管表面, 被接枝的聚合物的含量接近90%.     

超级电容器用含氮碳与含氮碳/炭气凝胶复合电极材料的制备和性能研究

采用原位聚合法合成聚苯胺(PAIN)及聚苯胺/炭气凝胶(PAIN/CA)复合材料,经过高温裂解制备含氮碳(NC)及含氮碳/炭气凝胶复合材料(NC/CA),再以KOH为活化剂对其进行活化,制备活化含氮碳(ANC)及活化含氮碳/炭气凝胶复合材料(ANC/CA)。采用扫描电镜、循环伏安、恒流充放电以及电化学阻抗等方法进行性能测试,结果表明,由于KOH的活化作用,含氮碳材料的粒径明显变小,其比电容值为138 F/g,高于未活化含氮碳材料(98 F/g),ANC/AC3复合材料电极的比电容值比ACA电极(88 F/g)高,达到127 F/g。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.