新型含氟耐高温聚吡咙--合成与性能研究

通过改进的Chichibabin反应合成了主链含有吡啶单元的新型含氟四胺单体 ,2 ,6 双 (3′ ,4′ 二氨基苯基 ) 4 (3″ ,5″ 双三氟甲苯基 )吡啶 (6FPA) .利用 6FPA与芳香族二酐单体 3,3′ ,4 ,4′ 二苯醚四羧酸二酐 (ODPA)通过两步热环化工艺制备了新型聚吡咙 (Polypyrrolone ,PPy)化合物 .对其所进行的各种性能测试结果表明 ,这种主链含有刚性吡啶结构、侧链带有含氟取代基的芳杂环高分子材料不仅保持了其固有的耐热性能 ,而且具有优良的成膜性能与耐水解性能 .例如其起始热分解温度为 5 5 8℃ ,失重 10 %温度为 5 91℃ ,72 0℃时的残余重量百分数为 6 8% ,玻璃化转变温度为 318℃ .PPy薄膜在 10 %NaOH水溶液中水解 7天仍具有良好的耐热性能与柔韧性 .     

基于苯醚型含氟二胺的聚酰亚胺膜材料的合成与表征

4,4′-二羟基二苯醚和2-氯-5-硝基三氟甲苯经Williamson反应得到4,4′-双(4-硝基-2-三氟甲基苯氧基)二苯醚;在Pd/C-水合肼还原作用下得到4,4′-双(4-氨基-2-三氟甲基苯氧基)二苯醚(p-6FAPE).采用3种苯醚型含氟二胺1,4-双(3-氨基-5-三氟甲基苯氧基)苯、1,4-双(4-氨基-2-三氟甲基苯氧基)苯和p-6FAPE分别与3,3′,4,4′-二苯醚四酸二酐(ODPA)和均苯四甲酸二酐通过两步法制备出6种含氟聚酰亚胺(PI),对其溶解性、热性能和光学性能进行研究.这些PI具有较好的溶解性,且具有良好的热稳定性;ODPA基PI在可见光波长范围具有优良的透明性,450 nm处的透光率超过80%.     

有机可溶性含氟不对称聚酰胺酰亚胺的合成与性能

采用不对称联苯二酐单体2,3,3′,4′-联苯四甲酸二酐(a-BPDA)与3-氨基-2,4,5-三氟苯甲酸(3FAB)反应制备了一种新型不对称二酸化合物2,3,3′,4′-联苯四甲酸-N,N′-双(3-羧基-2,5,6-三氟苯基)二酰亚胺 (a-BPFDI).以此两种酸为原料、N-甲基-2-吡咯烷酮(NMP)为溶剂、亚磷酸三苯酯(TPP)与吡啶为缩合剂、氯化钙为催化剂,通过Yamazaki-Higashi反应,直接与3种芳香族二胺单体反应制得一系列聚酰胺酰亚胺(PAI).研究表明:PAI材料在极性非质子性溶剂中具有优良的溶解性能,其薄膜的玻璃化转变温度超过250 ℃,氮气中起始热分解温度超过410 ℃.此外,PAI薄膜还具有良好的力学性能以及介电性能.厚度为10 μm左右的PAI薄膜在可见光区(400～700 nm)的透光率达到或超过80%.     

含酚酞基团的聚酰亚胺膜材料的合成与性能

将酚酞分别和对氯硝基苯、2-氯-5-硝基三氟甲苯经Williamson反应得到3,3-双[(4-硝基苯氧基)苯基]酚酞和3,3-双[(4-硝基-2-三氟甲基苯氧基)苯基]酚酞;在Pd/C-水合肼还原作用下分别得到3,3-双[(4-氨基苯氧基)苯基]酚酞(Ⅰ)和3,3-双[(4-氨基-2-三氟甲基苯氧基)苯基]酚酞(Ⅱ).采用上述2种二胺单体分别与1,2,3,4-环丁烷四酸二酐(CBDA)、均苯四甲酸二酐(PMDA)、3,3,4,4-二苯醚四酸二酐(ODPA)和六氟二酐(6FDA)通过两步法制备出8种含酚酞基团的聚酰亚胺(PI)薄膜,然后采用核磁(NMR)、红外光谱(FTIR)、X-射线衍射仪(XRD)、紫外-可见分光光度计(UV-Vis)、热重分析仪(TGA)、示差扫描量热仪(DSC)和溶解性测试等测试手段和方法对所得到的PI的化学结构、光学性能、热性能和和溶解性等性质进行表征.研究结果表明,这些PI主要表现出非晶结构,且具有良好的溶解性和热性能;除PMDA基PI外,其余PI均表现出良好的浅色、透明特性.     

1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑的合成

以2,4-二氟联苯为起始原料,经酰化反应制得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲酮(2);2经NaBH4还原得2′,4′-二氟-(1,1′-联苯)-4-基苯基甲醇(3);3经氯代得2′,4′-二氟-(1,1′-联苯)-4-基苯基氯甲烷(4);4与咪唑发生亲核取代反应合成了1-[2′,4′-二氟-(1,1′-联苯)-4-基苯基甲基]-咪唑(5). 2～5为新化合物,其结构经1H NMR, IR, MS和元素分析确证.     

共聚聚酰亚胺膜材料的合成及其气体渗透性能研究

以2,2′-双(3,4-二羧基苯基)六氟丙烷二酐(6FDA)作为二酐单体,1,3-苯二胺(mPDA)和2,6-二氨基甲苯(2,6-DAT)为二胺单体,采用溶液共缩聚方法合成了一系列新型共聚聚酰亚胺(6FDA-2,6-DAT/mPDA),该类聚合物均能溶于DMF、DMAc、NMP等极性非质子溶剂中,具有较好的成膜性.测试了H2、N2、O2、CH4、CO25种气体在6FDA-2,6-DAT/mPDA共聚聚酰亚胺致密膜中的渗透性能.结果显示,该系列共聚物具有优异的分离性能.在35℃,0.2 MPa下,H2/N2、O2/N2、CO2/CH4的分离性能均接近或突破Robeson上限.     

含全氟环丁烷环可溶性聚酰亚胺的合成与表征

以乙酰氨基苯酚为原料,经过BrCF2CF2Br氟烷基化、Zn催化脱卤、热环化二聚,以及水解去保护,合成了一种含全氟环丁烷环的二胺单体1,2,3,3,4,4-六氟-1,2-双[4-(氨基)苯氧基]环丁烷.用该单体分别与酯环二酐双环[2·2·1]辛烷-2,3,5,6-四羧基2,3,5,6-二酐(BHDA)、芳香性二酐3,3′,4,4′-联苯四酸二酐(BPDA)和3,3′,4,4′-二苯酮四酸二酐(BTDA)通过“一步法”制备了3种新型含全氟环丁烷环聚酰亚胺.通过粘度测试、溶解性实验、FT-IR、热失重分析(TGA)和差热扫描量热(DSC)分析等手段,对所合成的聚酰亚胺的结构与性能进行了表征.结果显示该类聚酰亚胺可溶于大多数常用极性有机溶剂,热分解温度高于480℃,其中两种聚合物玻璃化温度低于150℃,表明含全氟环丁烷环聚酰亚胺具有良好的溶解性和可加工性.     

氟伐他汀钠的合成

以氟苯为起始原料,通过两步反应得N-(4-氟苯甲酰甲基)-N-(1-甲基乙基)苯胺(5);5在ZnCl2存在下环化得3-(4′-氟苯基)-1-(1′-甲基乙基)吲哚(6);6与3-N-甲基-N-苯基胺基丙烯醛发生Vilsmeier-Haauc反应得(E)-3-[3′-(4″-氟苯基)-1′-(1″-甲基乙基)吲哚-2′-基]-2-丙烯醛(8);8经缩合、还原、水解得氟伐他汀钠,总收率10.5%.     

4-苯乙炔基苯胺封端聚酰亚胺树脂的合成与性能研究

使用4-苯乙炔基苯胺(4-PEA)作为反应性封端剂,和3,3′,4,4′-二苯醚四酸二酐(ODPA),3,3′,4,4′-联苯四酸二酐(BPDA),1,4-双(4′-氨基-2′-三氟甲基苯氧基)苯(BTPB)和3,4′-二氨基二苯醚(3,4-′ODA)反应合成了系列4-苯乙炔基苯基封端的聚酰亚胺低聚物,对低聚物的化学结构、热性能和熔体粘度以及固化后树脂的热性能等进行了研究.实验结果表明,低聚物均具有一定的结晶性,含有ODPA的聚酰亚胺低聚物较之含有BPDA的低聚物具有更低的熔体粘度,且出现最低熔体粘度的温度更低;固化后的树脂表现出良好的热性能,含有BPDA的树脂具有更高的玻璃化转变温度;系列低聚物中二胺单体的比例对于低聚物的熔体粘度和固化后树脂的热稳定性有一定影响.     

含空穴传输基团三联吡啶(2,2′:6′,2″-terpyridine)衍生物铕配合物的合成及发光性能研究

以2,2′∶6′,2″-三联吡啶(L1)为基础,通过引入不同的空穴传输基团合成了4′-咔唑基-2,2′∶6′,2″-三联吡啶(L2),4′-二苯基胺基-2,2′∶6′,2″-三联吡啶(L3),4′-二(4-叔丁基苯基)胺基-2,2′∶6′,2″-三联吡啶(L4),4′-(N-苯基-1-萘基)胺基-2,2′∶6′,2″-三联吡啶(L5),4′-(N-苯基-2-萘基)胺基-2,2′∶6′,2″-三联吡啶(L6)5个N,N,N-三齿中性配体,然后以三氟乙酰噻吩丙酮(HTTA)作为第一配体合成了6种铕配合物。在369~373 nm激发条件下,配合物都表现出铕离子5D0-7FJ(J=0,1,2,3,4)的特征发射。引入不同的空穴传输基团后,在铕离子的周围形成了"光吸收天线"(light-harvesting antenna),不仅扩大了配合物吸收光能的范围、增强了配合物的吸收强度,而且提高了配合物的光致发光性能。其中含有咔唑基团的配合物具有最强的发光强度和最长的激发态寿命。     

New organosoluble polyimides with low dielectric constants derived from bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl] diphenylmethylene

A new kink diamine with trifluoromethyl group on either side, bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl]diphenylmethane (BTFAPDM) , was reacted with various aromatic dianhydrides to prepare polyimides via poly (amic acid) precursors followed by thermal or chemical imidization. Polyimides were prepared using 3,3′, 4,4′-biphenyltetracarboxylic dianhydride(1), 4,4′-oxydiphthalic anhydride(2), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (3), 4,4′-sulfonyldiphthalic anhydride(4), and 4,4′-hexafluoroisopropylidene-diphathalic anhydride(5). The fluoro-polyimides exhibited low dielectric constants between 2.46 and 2.98, light color, and excellent high solubility. They exhibited glass transition temperatures between 227 and 253°C, and possessed a coefficient of thermal expansion (CTE) of 60-88 ppm/°C. Polymers PI-2, PI-3, PI-4, PI-5 showed excellent solubility in the organic solvents: N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridkie and tetrahydrofuran (THF). Inherent viscosity of the polyimides were found to range between 0.58 and 0.72 dLg-1. Thermogravimetric analysis of the polyimides revealed a high thermal stability decomposition temperature in excess of 500°C in nitrogen. Temperature at 10 % weight loss was found to be in the range 506-563°C and 498-557°C in nitrogen and air, respectively. The polyimide films had a tensile strength in the range 75-87 MPa; tensile modulus, 1.5-2.2 GPa; and elongation at break, 6-7%.     

Preparation and Properties of a Thermoplastic Partially Crystalline Polyimide in the Oriented State

Russian Journal of Applied Chemistry - Polyamido acids derived from 4,4′-bis(4-aminophenoxy)diphenyl (diamine) and 1,3-bis(3′,4-dicarboxyphenoxy)benzene dianhydride were synthesized in...     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

Synthesis and properties of polyimides from thianthrene-2,3,7,8-tetracarboxylic dianhydride-5,5,10,10-tetraoxide

Thianthrene - 2,3,7,8 - tetracarboxylic dianhydride - 5,5,10,10 - tetraoxide (TADATO), a dianhydride having two sulfonyls between two phenyl rings, was synthesized and polymerized with several diamines by a two-step method. Tough polyimide membranes were obtained with flexible diamines but not with rigid diamines. Most of TADATO-based polyimides are soluble in polar solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone. IR study confirmed that almost complete imidization of TADATO-based poly(amic acid) membranes could be achieved by thermal treatment at 100, 200, and 300°C for each 1 h. In a series of polyimides based on 4,4′-oxydianiline, the polyimide from TADATO showed higher gas permeability coefficient of CO₂ and higher selectivities of CO₂/N₂ and CO₂/CH₄ than those of polyimides from pyromellitic dianhydride and 3,3′,4,4′-biphenyltetracarboxylic dianhydride, and was comparable to that from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 485–494, 1998     

4′-(二茂铁基)-2,2′∶6′,2″-三联吡啶钴(Ⅱ)配合物混合价态的电荷转移

设计合成了4′-(二茂铁基)-2,2′∶6′,2″-三联吡啶钴(Ⅱ)配合物1以及参比配合物4′-(4-甲苯基)-2,2′∶6′,2″-三联吡啶钴(Ⅱ)配合物2和2,2′∶6′,2″-三联吡啶钴(Ⅱ)配合物3,配合物1中二茂铁基给电子基团的引入使其在可见光区的吸收明显增强,并在部分氧化时呈现混合价态的电荷转移(MVCT)吸收.     

Synthesis of a New Aromatic Dianhydride Containing Pyridine Ring and Related Polyimide

Aromatic polyimides are well known as high performance polymers owing to their excellent thermal stability, mechanical and electrical properties1,2. In the preparation of polyimides, aromatic dianhydride monomer plays a critical role3. Although aromatic t…     

Synthesis and coordination properties of the zinc complex of dimeric porphyrin in reactions with imidazole, 2-methylimidazole, and the pyridine in benzene

Dimeric porphyrin(2,6-bis[15′-(3″,5″-di-tert-butylphenol)-3′,7′,13′,17′-tetramethyl-2′,8′,12′,18-tetraethylporphin-5′-yl]-4-tert-buthylphenol) and its binuclear zinc complex were obtained from 4,4′-dimethyl-3,3′-diethyldipyrrolylmethane, 2,6-diformyl-4-tert-butylphenol and 3,5-di-tert-buthylbenzaldehyde. Coordina-tion properties of dimeric zincporphyrin in the intermolecular reaction with nitrogen-containing bases (imidazole, 2-methylimidazole, and pyridine) in benzene were studied. Geometry and electronic structure of the zincporphyrin and its molecular complexes were calculated by a quantum-chemical method. Energy characteristics of the intermolecular reaction of the dimeric zincporphyrin with bases were determined. The calculated energies of the central metal atom interaction with the nitrogen atom of an extra-ligand agree well with the stability of the Zn-porphyrin molecular complexes. The influence of the deformation distortions of the porphyrin ligand on the strength of the metal-extra-ligand σ-bond was established.