Efficient use of bifunctional acid-base properties for alkylammonium formation in amine-substituted zeolites

The formation of alkylammonium groups in amine-doped zeolites is studied using density functional theory on small clusters representing the chemically active site. The presence of both strong Lewis base and Br?nsted acid sites leads to a significant lowering of reaction barriers as opposed to alkoxide formation in full-oxygen zeolites. Furthermore, amine-substituted zeolites suggest novel reaction pathways that are not solely centralized around the aluminum substitution but in which two tetrahedral sites are involved, maximizing use of the zeolitic acid site and its surroundings. An investigation of the proton mobility in these yet to be synthesized materials demonstrates the need for minimizing the amount of Al-NH-Si bridges, as to prevent protonation of the amine group.     

Separation of racemic 2,4-dinitrophenyl amino acids on zirconia-immobilized quinine carbamate in reversed-phase liquid chromatography

Zirconia is known to be one of the best chromatographic support materials due to its excellent chemical, thermal, and mechanical stability. A quinine carbamate-coated zirconia was prepared as a chiral stationary phase for separation of enantiomers of DNP-amino acids in reversed-phase liquid chromatography. Retention and enantioselectivity of this phase were compared to those for quinine carbamate bonded onto silica. Most amino acids studied were separated on the quinine carbamate-zirconia CSP although retention was longer and chiral selectivity was somewhat lower than on the corresponding silica CSP. Increased retention and decreased selectivity are probably due to strong non-enantioselective Lewis acid-base interactions between the amino acid molecule and the residual Lewis acid sites on the zirconia surface.     

Predicting the activity of single isolated Lewis acid sites in solid catalysts

An experimental study of the activity of Ti-, Zr- and Sn-beta catalysts in different types of oxidation reactions is combined with a quantum-chemical analysis of the electronic properties of the active sites and the adsorbed reactants. The differences observed in the catalytic behaviour of the three materials are explained in terms of the molecular orbital distribution of each system. The intrinsic Lewis acid strength of the isolated active site, the degree of back-donation from the catalyst to the empty orbitals of the organic reactant and the net atomic charges on selected atoms are proposed as predictors of reactivity.     

Synthesis of new sulfonic acid-containing oligosaccharide mimetics of sialyl Lewis A

Two trisaccharides as new sulfonic acid mimetics of the sialyl Lewis A tetrasaccharide were synthesized. The natural sialic acid residue is replaced by a C-sulfonic acid moiety attached to position C-3′ of the lactosamine unit of the mimetics. The l-fucose unit was also replaced by a d-arabinose ring in one of the analogues. Formation of the sulfonic acid moiety on the trisaccharide level could be successfully achieved by means of introduction of an acetylthio moiety into the galactose skeleton and subsequent oxidation. The equatorial arrangement of the acetylthio group linked to C-3 of the galactose ring could be achieved by double nucleophilic substitution; efficient formation of the gulo-triflate derivatives required low-power microwave activation. Oxidation of the acetylthio group was carried out using Oxone in acetic acid.     

微波辅助法合成Hantzsch酯

以芳香醛、乙酰丙酮及碳酸氢铵为原料,固载路易斯酸蒙脱土为催化剂,通过微波辅助法催化合成了5个Hantzsch酯类化合物,其结构经¹H NMR和IR确证。考察了催化剂、溶剂、温度、时间和氮源对产率的影响。结果表明：反应温度60 ℃,微波辐照时间10 min, n(芳香醛) :n(乙酰乙酸乙酯) :n(碳酸氢铵)=2.0:2.0:1.0,氯化镍固载蒙脱土为催化剂（10%）,产率高达97.8%。     

Liquid Phase Hydrogenation of t,t,c‐1,5,9‐Cyclododecatriene over Ni/MCM‐41 and Ni/SiO2 Catalysts

Ni‐loaded pure siliceous and aluminosilicate MCM‐41 (Ni/MCM‐41) and nickel‐loaded silica (15Ni/SiO₂) were synthesized via wet impregnation and were characterized by various techniques. The H₂ consumption in the TPR analysis was found to be proportional to the Ni amount in the calcined samples. After reduction the average Ni particle sizes of 15Ni/MCM‐41 and 15Ni/SiO₂ were 9–12 and 16 nm, respectively, by means of XRD and TEM measurements. All catalysts owned weak and intermediate Lewis acid sites that increased slightly with increasing the Ni amount and the Al content. In the liquid phase hydrogenation of t,t,c‐1,5,9‐cyclododecatriene over Ni/MCM‐41, the catalytic activity was parallel to the Ni content and enhanced slightly with the acid amount of the catalysts. Consequently, it was proposed that the Ni metallic sites contributed the major effect to the catalytic activity while the Lewis acid sites promoted a small but significant influence on the catalytic performance. It is noteworthy that all 15Ni/MCM‐41 catalysts exhibited remarkably higher activity than that of the conventional 15Ni/SiO₂ catalyst.     

Study on the NaNp/Al2O3-SiO2 system

Sodium naphthenide (NaNp) deposited on aluminosilicate gels yields systems that exhibit signals in EPR spectra, the multiplicity, g values, and intensities of which depend on the gel composition. The symmetrical singlets (I) of a g(1) value of 2.00 were assigned to the complexed naphthalene anion radicals on the centers occurring on the surfaces of the alumina and silica phases of the gels studied. Those radicals complexed on surface Lewis acid sites are of hard acid/hard base type according to Pearson theory, and are bonded to the sites by ionic forces. The asymmetrical singlets (II) described by the value g(2)=1.95 were assigned to naphthalene anion radicals, which are complexed by the centers of the aluminosilicate phase of the gels studied. Those radicals, complexed on surface Lewis acid sites of this phase, are of soft acid/soft base type and are bonded to the sites by covalent bonds. The highest intensity of the singlet (I) was recorded for the system containing alumina gel. The highest intensity of the singlet (II) was recorded for the system containing Al(2)O(3) in 30 wt%. The structures of Lewis acid sites on aluminosilicate phases are postulated to be different from those on alumina or silica phases.     

含硼杂原子Na-B-ZSM-5分子筛对甲醇脱氢制甲醛反应的催化性能

以白炭黑为硅源、硼酸为硼源、NaOH为碱源、四丙基溴化铵(TPABr)和1,6-己二胺(HMDA)混合模板剂,采用水热合成法制备含硼杂原子Na-B-ZSM-5分子筛,用XRD、SEM、FT-IR、UV-vis、11B MAS NMR、NH3-TPD等方法对其进行表征。在连续流动常压固定床反应器上评价Na-B-ZSM-5分子筛对甲醇脱氢制甲醛反应的催化性能,考察n(Si)/n(B)、n(Na2O)/n(SiO2)、晶化温度和晶化时间等制备参数以及反应温度和质量空速等工艺参数对催化性能的影响。结果表明,硼进入了分子筛的骨架结构中,存在与B酸中心有关的骨架四配位硼和与L酸中心有关的骨架三配位硼,Na-B-ZSM-5分子筛含有较多的弱酸位和少量的中强酸位。催化剂的最佳制备参数为n(Si)/n(B)比值为7.5、n(Na2O)/n(SiO2)比值为0.14、晶化温度170℃、晶化时间48 h。Na-B-ZSM-5(7.5)分子筛在反应温度550℃、质量空速1.85 h-1的反应条件下对甲醇的转化率为62.97%,甲醛的选择性为68.86%。     

Characterization and acidic properties of Al-SBA-15 materials prepared by post-synthesis alumination of a low-cost ordered mesoporous silica

A series of Al-containing SBA-15 type materials with different Si/Al ratio, were prepared by post-synthesis modification of a pure highly ordered mesoporous silica SBA-15 obtained by using sodium silicate as silica source, and amphiphilic block copolymer as structure-directing agent. A high level of aluminum incorporation was achieved, reaching an Si/Al ratio of up to 5.5, without any significant loss in the textural properties of SBA-15. These materials were fully characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ²⁷Al NMR spectroscopy, and N₂ adsorption at 77 K. The acid properties of these materials have been evaluated by NH₃-TPD, adsorption of pyridine and deuterated acetonitrile coupled to FTIR spectroscopy. The effective acidity of these materials was evaluated using two catalytic reactions: 2-propanol dehydrogenation and 1-butene isomerization. The adsorption of basic probe molecules and the catalytic behavior revealed an evolution of the acid properties with the Al content. These studies have shown that the Al-SBA-15 materials contain Brønsted and Lewis acid sites with medium acidity which makes them appropriate to be used as acid catalysts in heterogeneous catalysis, catalytic supports, and adsorbents.     

Coupling sol-gel synthesis and microwave-assisted techniques: a new route from amorphous to crystalline high-surface-area aluminium fluoride

A non-aqueous sol-gel Al-based fluoride has been subjected to the microwave solvothermal process. The final material depends on the temperature heat treatment used. Three types of material have been prepared: 1) for low temperature heat treatment (90 degrees C) X-ray amorphous alkoxy fluoride was obtained; 2) for the highest temperature used (200 degrees C) the metastable form beta-AlF3 was obtained with a very large surface area of 125 m2 g(-1). The mechanism of the amorphous=crystalline transformation has been rationalised by the occurrence of a decomposition reaction of the gel fluoride induced by the microwave irradiation. 3) Finally, at intermediate temperature (180 degrees C) a multi-component material mixture exhibiting a huge surface area of 525 m2 g(-1) has been obtained and further investigated after mild post-treatment fluorination using F2 gas. The resulting aluminium-based fluoride still possesses a high-surface-area of 330 m2 g(-1). HRTEM revealed that the solid is built from large particles (50 nm) identified as alpha-AlF3, and small ones (10 nm), relative to an unidentified phase. This new high-surface-area material exhibits strong Lewis acidity as revealed by pyridine adsorption and catalytic tests. By comparison with other materials, it has been shown that whatever the composition/structure of the Al-based fluoride materials, the number of strong Lewis acid sites is related to the surface area, highlighting the role of surface reconstruction occurring on a nanoscopic scale on the formation of the strongest Lewis acid sites.     

Preparation and Acid Catalytic Activity of TiO2 Grafted Silica MCM-41 with Sulfate Treatment

TiO2 grafted silica MCM-41 catalyst with and without sulfate treatment were prepared. The structural and acid properties of these materials were investigated by XRD, N2 adsorption-desorption, element analysis, thermal analysis, Raman and FTIR measurements. Their acid-catalytic activities were evaluated using the cyclization reaction of pseudoionone. It was found that the obtained materials possess well-ordered mesostructure, and the grafted TiO2 components were in highly dispersed amorphous form. T/MCM41 without sulfation contained only Lewis acid sites, while Br?nsted and Lewis acidities were remarkably improved for the sulfated materials ST/MCM41 and d-ST/MCM41. T/MCM-41 was not active for the cyclization reaction of pseudoionone, but ST/MCM-41 and d-ST/MCM-41 possessed favorable catalytic activities. The catalytic performance of ST/MCM-41 was comparable with that of the commercial solid acid catalyst of Amberlyst-15, and better than that of d-ST/MCM-41, although the latter underwent a second TiO2 grafting process and accordingly had higher Ti and S content. The specific surface structure of Si-O-Ti-O-S=O in ST/MCM-41 and the bilateral induction effect of Si and S=O on Si-O-Ti bonds were speculated to account for its higher acid catalytic activity.     

有序介孔Sn-SBA-15负载铂催化剂上丙烷脱氢性能的提高

丙烷脱氢制丙烯能够将低级烷烃转变成烯烃,是有效扩大丙烯来源的生产工艺.铂锡催化剂用于丙烷催化脱氢的主要缺点是稳定性差、选择性低,通过稳定锡的氧化态可以大大改善催化剂的脱氢性能及稳定性.本文采用一锅水热合成法制备了一系列高比表面积具有高度有序介孔结构的Sn掺杂的Sn-SBA-15材料,并作为载体负载铂催化剂用于丙烷脱氢反应.同时利用传统浸渍法(IM)合成了Sn/SBA-15-IM材料作为对比.结合X射线衍射(XRD)、BET比表面积和孔体积测试、红外光谱(FT-IR)、X射线光电子能谱、H2程序升温脱附(H2-TPD)、热重分析(TGA)、扫描电镜和透射电镜等多种物理化学表征手段研究了Sn-SBA-15材料和催化剂的结构性质及其丙烷脱氢反应性能.XRD和BET比表面积和孔体积测试结果表明,水热合成法原位引入助剂Sn不影响载体SBA-15的有序孔道结构,同时能够保持较大的比表面积.传统浸渍法引入Sn会堵塞载体孔道,载体比表面积及孔道有序度下降.Sn掺杂进入SBA-15骨架能够增强Sn物种与载体的相互作用,有利于Sn物种在反应过程中保持氧化态,提高催化剂丙烷脱氢反应的活性及选择性.当Sn掺杂量增至2.0 wt％时,Pt,Sn组分与载体之间的相互作用减弱,催化剂中Sn0物种所占比例增多,导致催化剂丙烷脱氢性能下降.在丙烷脱氢反应过程中,一锅法引入Sn的催化剂上反应活性和稳定性明显优于浸渍法引入Sn的催化剂.其中,Pt/0.5 Sn-SBA-15催化剂表现出最优的丙烷脱氢性能,丙烷转化率为43.8％,丙烯选择性为98.5％.     

SO42-/TiO2-SiO2 mixed oxide catalyst, 3. An eco-friendly catalyst for esterification of acetic acid

The effect of addition of titania to silica was examined by various characterization techniques such as FT-IR, BET surface area, surface acid strength/acid sites by the Hammett indicator method and Br?nsted/Lewis acid sites by pyridine adsorbed IR study. Ti-O-Si bond is formed in case of TiO₂-SiO₂ sample, as observed from FT-IR data. Acid strength, surface acid sites, and rate constant for esterification of acetic acid are increased with Ti-O-Si bonding and sulfate impregnation. Both Br?nsted and Lewis acid sites are responsible for catalysing the esterification reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

Core–shell SiO2‐coated Fe3O4 with a surface molecularly imprinted polymer coating of folic acid and its applicable magnetic solid‐phase extraction prior to determination of folates in tomatoes

A novel core–shell magnetic surface molecularly imprinted polymer with folic acid as a template was successfully synthesized by the sol–gel method. To generate Lewis acid sites in the silica matrix for the interaction of the metal coordinate with the template, 3‐aminopropyltriethoxysilane was used as a functional monomer, tetraethyl orthosilicate as a cross‐linker, and aluminum ions as a dopant. The magnetite encapsulated by the silica shell plays an important role as a magnetic‐coated polymer. The synthesized product was characterized by powder X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and FTIR and UV/Vis spectroscopy. The powder X‐ray diffraction patterns, FTIR and UV/Vis spectra confirmed the characteristics of the as‐prepared silica coated magnetite and folic acid molecularly imprinted polymer. It was successfully applied for magnetic solid‐phase extraction prior to the determination of folates in tomato samples using high‐performance liquid chromatography with photodiode array detection. The detection limit of the proposed method was 1.67 μg/L, and results were satisfactory, with a relative standard deviation of < 3.94%.     

Effect of the CuAl2O4 and CuAlO2 Phases in Catalytic Wet Air Oxidation of ETBE and TAME using CuO/γ-Al2O3 catalysts

This paper studies Cu/Al₂O₃ catalysts, synthesized in two ways: copper deposit in the synthesis of alumina (sol gel) and incipient impregnation stabilized at 400 °C. The materials were characterized by X-ray diffraction studies, nitrogen physisorption, temperature programmed reduction of H₂, dehydration of isopropanol, scanning electronic microscopy, transmission electronic microscopy, which were evaluated in the liquid phase oxidation reaction of ethyl tert-butyl ether and tert-amyl methyl ether. The formation of CuAl₂O₄ and CuAlO₂ in the samples synthesized by sol gel, led to a modification of the texture, thus resulting in an expansion of the specific area of the materials. CuAl₂O₄ and CuAlO₂ have been identified by DRX from a content of 10 % Copper, the first showed the highest intensity with this technique. In the same way, these species favor the presence of Lewis acid sites; this is reflected in the materials with (Di-isopropyl Ether) DIPE of 96.7 % and 91.1 % for the samples SAlCu5 and SAlCu15 respectively. The catalytic activity of the materials prepared by sol gel is in the function of the number of surface acid sites, the smaller particle size of the Cu and the surface of the contact, in the case of the ETBE meanwhile for TAME the activity was based mainly on the strength of the present acid sites. With impregnated materials, the activity is attributed to the smaller particle size of the Cu and the greater strength of the surface acid sites in the solid. The formation of spinel species inhibits the leaching phenomenon in the reaction milieu.     

Surface organometallic chemistry of main group elements: selective synthesis of silica supported [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+)

The reaction of the Lewis acid B(C(6)F(5))(3) with silanol groups of silica surfaces, dehydroxylated at different temperatures (300, 500, 700, and 800 degrees C), has been investigated in presence of the Br?nsted base NEt(2)Ph. The structure of the resulting modified silica supports [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+) (1) has been carefully identified by IR and multinuclear solid-state NMR spectroscopies, isotopic (2)H and (18)O labeling, elemental analysis, molecular modeling, and comparison with synthesized molecular models. Highly dehydroxylated silica surfaces were required to transform selectively each silanol group into unique [triple bond Si-OB(C(6)F(5))(3)](-)[HNEt(2)Ph](+) fragments. For lower dehydroxylation temperatures, two sorts of surface sites were coexisting on silica: the free silanol groups [triple bond SiOH] and the ionic species 1.     

合成云母蒙脱石的交联及其性能的研究

分别用十三铝低聚物和丙胺基三乙氧基硅烷与合成云母蒙脱石交联,制得了柱高分别为0.83和0.86 nm的交联云母蒙脱石Al-CLM和Si-CLM。按Si-O键长估算,硅柱可能由SiO_2的三聚物构成。IR、DTA研究结果表明,在交联蒙脱石焙烧时,因交联而使八面体层中羟基易于脱除。云母蒙脱石交联物的酸性与柱的性质有关。硅交联物的强酸点减少,弱酸点增多,B酸所占份额增加。铝交联物强酸点增加,弱酸点减少,L酸所占份额增大。裂解活性主要与催化剂强酸中心有关。活性衰减速率似受强L酸影响更多。     

硅源对MCM-22分子筛合成及物化性质的影响

在动态水热条件下,研究了硅溶胶、白炭黑、硅酸及硅胶为硅源时对MCM-22分子筛合成及物化性质的影响。以硅溶胶、白炭黑、硅酸三种硅源均可合成出高结晶度且无杂晶的片状MCM-22分子筛,其平均粒径分别为190、220和750 nm。硅源影响分子筛的聚集形态,三种硅源分别形成晶粒分散、晶粒半分散及晶粒聚集形态。三组样品的酸强度分布基本一致,都具有较多的中强酸分布,由硅溶胶和硅酸所得MCM-22分子筛在中强酸范围具有更高的B/L酸比值,以白炭黑合成的分子筛总酸量最高。NMR结果表明,样品中的铝以骨架铝为主,不存在明显的非骨架铝。由于硅胶对合成体系中游离水的吸附作用,水热反应难以发生,不能得到MCM-22分子筛,硅胶作为分子筛合成硅源时需要选择合适的反应条件。     

MCM-36分子筛的合成及其苯与丙烯烷基化性能研究

分别从MCM-22和MCM-49前驱体出发合成了MCM-36分子筛, 在液-固固定床反应器上对MCM-36分子筛的苯与丙烯液相烷基化反应性能进行了评价. 由MCM-22前驱体出发合成的MCM-36(A) 结晶度良好, 比MCM-22具有更高比表面积和介孔孔容, 酸量明显下降. 由MCM-49前驱体出发合成的MCM-36(B)的比表面积和介孔孔容增加, 小角XRD特征衍射峰强度低于MCM-36(A), 与MCM-49相比酸量下降幅度较小. 在苯与丙烯液相烷基化反应中MCM-36(A)的活性与MCM-22相当, 丙烯的转化率大于99.5%, 异丙苯的选择性比MCM-22提高了7%. MCM-36(B)的反应活性高于MCM-36(A), 而异丙苯的选择性低于MCM-36(A). MCM-36分子筛上苯与丙烯液相烷基化反应活性的提高归因于有效酸性位的增加,异丙苯选择性的提高则主要归因于B酸量的降低.     

Rapid synthesis and biological evaluation of 1,4-dihydropyridine derivatives containing a benzothiazolyl moiety

A series of N-(6-methylbenzothiazolyl)-2,3,5,6-tetrasubstituted-4-(aryl)-1,4-dihydropyridines were synthesized by reaction of 2-amino-6-methylbenzothiazole, aromatic aldehyde and active methylene compound in methanol by conventional, as well as, microwave irradiation (solvent free and solid support) methods. The microwave irradiation technique gives better yield and shorter reaction time. Among solid supported microwave irradiation better yields are obtained in acidic alumina as compared to silica, neutral alumina, and basic alumina. All compounds were tested for antibacterial and antifungal activities and results have been compared with standard drugs. Entomological activities were also tested. The results showed that a change in the substitution pattern in 1,4-dihydropyridine derivatives may cause a marked effect on their antimicrobial activity.