树的最大特征值的上界的一个注记

设T是一个树,V是T的顶点集．记dv是υ∈V的度,△是T的最大顶点度．设υ∈V且dw=1．记k=ew+1,这里ew是w的excentricity．设δj′= max{dυ:dist(υ,w)=j},j=1,2,…,k-2,我们证明和这里μ1(T)和λ1(T)分别是T的Laplacian矩阵和邻接矩阵的最大特征值．特别地,记δo′=2．     

乘方的指数与其幂的位数的关系

为了探究乘方的指数与其幂的位数的关系,定义了几个有关的新概念,并且证明了两个关于乘方以及进制进位的定理,由此建立起关于乘方以及进制进位的理论体系,其中包括进位理论中判定乘方的指数与其幂的位数是否存在周期规律的判别法,以及进位规律的求解法和四条相关的性质.     

自由群的直积的检验元素的注记

本文研究了自由群的直积的检验元素,通过对直积的自同态的分解,得到了直积中的元素为检验元素的充分必要条件,改进了O'neill和Turner的结果.此外,构造了两类具体的检验元素.     

计算Hamilton矩阵特征值的一个稳定的有效的保结构的算法

提出了一个稳定的有效的保结构的计算Hamilton矩阵特征值和特征不变子空间的算法,该算法是由SR算法改进变形而得到的。在该算法中,提出了两个策略,一个叫做消失稳策略,另一个称为预处理技术。在消失稳策略中,通过求解减比方程和回溯彻底克服了Bunser Gerstner和Mehrmann提出的SR算法的严重失稳和中断现象的发生,两种策略的实施的代价都非常低。数值算例展示了该算法比其它求解Hamilton矩阵特征问题的算法更有效和可靠。     

不同的公理不同的几何

一位语文老师在博客上写反思.他在教《自相矛盾》这则寓言时,有学生站起来反驳:有这么傻的人么?太不可信了吧.面对这样大胆质疑的学生,这位老师不知如何处理为好! 现在的学生比以前更敢想敢做了.     

多维的一般的BBM-Burgers方程解的逐点估计

研究R~n中一般的BBM-Burgers方程解的渐进行为.运用Green函数法和Fourier分析方法得到了在非零常状态u~*附近小扰动解的逐点估计,作为一个推论,又得到了L~p(R~n)(1≤p∞)空间解的最佳的衰减估计.     

Lindelf的工作与Chaplygin的工作的互补性

运用Vakonomic模型导出Lindel f方程 ,表明Lindel f的工作与Vakonomic模型相吻合 ;运用Chetaev模型导出Chaplygin方程 ,表明Chaplygin的工作与Chetaev模型相吻合·　在此基础上 ,通过改进Chaplygin方程和Lindel f方程的表示形式 ,实现了从Lindel f方程向Chaplygin方程的合理过渡和从Chaplygin方程向Lindel f方程的合理的过渡·　最后 ,给出一个典型实例·　结果表明 ,正如Vako nomic模型与Chetaev模型是互补的一样 ,Lindel f的工作与Chaplygin的工作也是互补的·     

证明圆的切线的常用策略

圆的切线是初中数学的重点内容之一,也是中考的主要考察对象.本文举例介绍证明圆的切线的几种常用策略.一、当讨论的问题涉及圆的半径r及圆心到直线的距离d这样的数量关系时,往往可以     

纯正的群的正则带的构造

本文研究纯正的群的正则带.在给出这类半群的若干特征后,建立了纯正的群的正则带的构造定理.作为应用,同时给出了纯正的群的右拟正规带的构造定理.     

圆的概念是怎样形成的

一、问题的提出课堂教学中,数学概念往往是教师直接给出或从教科书上直接获得.随着探究教学的深入,局部探究的尝试,对概念的探究越来越引起教师的重视.数学概念是怎样形成的呢?请看下面课堂教学片段.     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

考虑服务和退货的双渠道供应链定价问题研究

在考虑零售服务和消费者退货情况下,运用两阶段优化方法分别探究了集中式和分散式两种双渠道供应链的最优定价策略。研究发现零售服务有助于提高零售商的渠道权力,并始终使制造商获益,但只有当服务水平小于某一临界值时,才使制造商和零售商同时得到帕累托改进。零售价格和直销价格与退货率正相关,而与服务水平的关系受渠道结构的影响。服务水平的提高加剧了供应链的“双重边际化”效应,制造商通过生产与消费者需求相匹配的产品来降低退货风险可以减弱这种效应,从而提高供应链效率。     

树脂基复合材料粘接的优化设计

本文在试验数据和理论分析的基础上,提出树脂基复合材料单搭接的优化设计的原则,胶粘剂的选择、被粘物的设计,粘接长度的选择、胶层厚度的选择等.认为通过优化设计可以提高粘接强度,减轻产品的重量,提高其质量.     

Variation of the structure and permeability of tensioned fiber layers during impregnation with a thermoplastic polymer melt

The influence of displacements of tensioned fibers on the impregnation of fibrous layers with a polymer melt and on the final composite structure is studied. Using computer simulation, it is shown that, during impregnation, the structure of tensioned fibrous layers changes considerably depending on the initial arrangement and tensioning of fibers. The consolidated regions formed under the melt front move inside the impregnated layer with the advancing melt front. Displacement of the tensioned fibers as well as the formation of “washouts” favors the impregnation of internal layers, but cause significant inhomogeneity of the polymer structure. The surface (on the side of the melt flow) regions are more saturated with the polymer than the internal ones. A difference in the melt percolation mechanisms at various impregnation regimes is revealed. The effective permeability coefficients of a tensioned fiber layer are not constant but depend on the conditions and regimes of impregnation. Submitted to the 11th Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 259–270, March–April, 2000.     

Stress intensity factors for a finite plate with an inclined crack by boundary collocation

In this paper, we combine the Muskhelishvili＇s complex variable method and boundary collocation method, and choose a set of new stress function based on the stress boundary condition of crack surface, the higher precision and less computation are reached. This method is applied to calculating the stress intensity factor for a finite plate with an inclined crack. The influence of θ （the obliquity of crack） on the stress intensity factors, as well as the number of summation terms on the stress intensity factor are studied and graphically represented.     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

Adiabatic divergence of the chaotic layer width and acceleration of chaotic and noise-induced transport

We show that, in spatially periodic Hamiltonian systems driven by a time-periodic coordinate-independent (AC) force, the upper energy of the chaotic layer grows unlimitedly as the frequency of the force goes to zero. This remarkable effect is absent in any other physically significant systems. It gives rise to the divergence of the rate of the spatial chaotic transport. We also generalize this phenomenon for the presence of a weak noise and weak dissipation. We demonstrate for the latter case that the adiabatic AC force may greatly accelerate the spatial diffusion and the reset rate at a given threshold.