含醛基功能化离子液体为载体液相合成氨基醚类化合物

以1-甲基咪唑、对二氯苄、对羟基苯甲醛和四氟硼酸钠为原料, 制备了一种含醛基的新型功能化离子液体1-(4-对甲酰基苯氧基亚甲基苄基)-3-甲基咪唑四氟硼酸盐(简写为[fmmim][BF4]). 为拓展功能化离子液体为载体的液相合成反应体系, 以该含醛基功能化离子液体为可溶性液相载体, 进行了Williamson醚化的合成反应, 较高产率和纯度得到了一系列氨基醚类化合物, 切割后得到的目标化合物不需要进行进一步的柱色谱纯化处理, 产率为81%～85%, 纯度为96%～99%. 回收得到的功能化离子液体可以重复套用多次而不影响其功效, 目标化合物的产率在81%～84%之间波动. 结果表明该方法可高效率地用于基于Williamson醚化反应的液相组合化学合成.     

Molecular dynamics simulation of room-temperature ionic liquid mixture of [bmim][BF4] and acetonitrile by a refined force field

1-Butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) is one of the promising room-temperature ionic liquids. To test the refined force field for [bmim][BF4] proposed in our previously work (J. Phys. Chem. B, 2004, 108, 12978-12989), thermodynamic properties of mixtures of [bmim][BF4](1)+ acetonitrile (2) are presented by using molecular dynamics over the whole concentration range. The calculated densities are in good agreement with the experimental data with deviations less than 2%, indicating the force field is applicable to the mixtures. In addition, the diffusion constants, viscosities, heats of vaporization, cohesive energy densities and excess properties of the mixtures are reported. The microscopic structures are discussed in detail, corresponding to the thermodynamic properties.     

Ionic liquid-in-oil microemulsions

Phase stability and small-angle neutron scattering (SANS) data show that surfactant-stabilized nanodomains of a typical ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4]) may be dispersed by the nonionic surfactant Triton-X100 in cyclohexane. Analyses of these SANS data are consistent with the formation of ionic liquid-in-oil microemulsion droplets.     

Density and Viscosity for Binary Mixtures of the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate with 2-Propanol,N,N-Dimethylacetamide and N,N-Dimethylformamide at 293.15–323.15 K: Experimental and PC-SAFT Modeling

Journal of Solution Chemistry - For three binary mixtures composed of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) with 2-propanol, N,N?dimethylacetamide (DMA) and...     

离子液体[bmim][BF4]对联苯甲酰光化学反应影响的瞬态吸收光谱

利用纳秒级激光光解瞬态吸收光谱研究了联苯甲酰(BZ)在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])与乙腈(MeCN)混合体系中的光化学反应行为. 考察了探针分子BZ存在下[bmim][BF₄]/MeCN比例对体系中化学反应动力学的影响. 实验发现: 在N₂饱和条件下, BZ溶液经激光辐照后产生的激发三线态³BZ^*遵循一级反应动力学规律衰减. 离子液体(IL)相对比例增加对³BZ^*瞬态吸收峰的位置和强度没有产生明显影响. 但离子液体体积分数V_IL的变化对[bmim][BF₄]/MeCN混合溶剂中光诱导电子转移的影响却非常显著, 总体上电子转移产生的自由基的表观生成速率常数k_gr随[bmim][BF₄]的V_IL增大而减小. 在[bmim]BF₄]比例足够大的情况下, ³BZ^*与三乙胺或四甲基对苯二胺之间的电子转移被抑制.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

Microwave-assisted synthesis of sulfide M2S3 (m = Bi, Sb) nanorods using an ionic liquid

Single-crystalline Bi(2)S(3) and Sb(2)S(3) nanorods have been successfully synthesized by the microwave-assisted ionic liquid method. The starting reagents were Bi(2)O(3) or Sb(2)O(3), HCl, Na(2)S(2)O(3), and ethylene glycol (EG) or ethanolamine, and the ionic liquid used was 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]). Our experiments showed that the ionic liquid played an important role in the morphology of M(2)S(3) (M = Bi, Sb). Single-crystalline Bi(2)S(3) nanorods could be prepared in the presence of [BMIM][BF(4)]. However, urchinlike Bi(2)S(3) structures consisting of nanorods were formed without using [BMIM][BF(4)]. Single-crystalline Sb(2)S(3) nanorods were obtained in the presence of [BMIM][BF(4)]. However, single-crystalline Sb(2)S(3) nanosheets could be prepared in the absence of [BMIM][BF(4)]. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and electron diffraction (ED).     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Morphology of poly(ethylene oxide) dissolved in a room temperature ionic liquid: a small angle neutron scattering study

Solutions of deuterated poly(ethylene oxide) (d-PEO) in 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF4]), a prototype room-temperature ionic liquid (RTIL), have been studied at room temperature over a range of polymer concentrations, using small angle neutron scattering (SANS), characterizing the conformation of PEO dissolved in RTILs. [bmim][BF4] behaves as a good solvent for d-PEO, which organizes in this solvent in non entangled random coils. These findings will help in optimizing the designing of microemulsions in these potentially environmentally friendly solvents.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

Synthesis of Fischer indole derivatives using carboxyl-functionalized ionic liquid as an efficient and recyclable catalyst

Fischer indole cyclization of phenylhydrazine and various ketones using carboxyl-functionalized ionic liquid, 1-carboxymethyl-3-methylimidazolium tetrafluoroborate (abbreviated as [cmmim][BF4]) as catalyst was successfully performed. The yields of thetarget compounds were 80-92%, the purities were 96-98%. The catalyst could be rocovered and reused for at least six times without significant loss in activity.     

Effect of alkyl chain length and hydroxyl group functionalization on the surface properties of imidazolium ionic liquids

Properties of the surface of ionic liquids, such as surface tension, ordering, and charge and density profiles, were studied using molecular simulation. Two types of modification in the molecular structure of imidazolium cations were studied: the length of the alkyl side chain and the presence of a polar hydroxyl group at the end of the side chain. Four ionic liquids were considered: 1-ethyl-3-methylimidazolium tetrafluoroborate, [C(2)C(1)im][BF(4)]; 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate, [C(2)OHC(1)im][BF(4)]; 1-octyl-3-methylimidazolium tetrafluoroborate, [C(8)C(1)im][BF(4)] and 1-(8-hydroxyoctyl)-3-methylimidazolium tetrafluoroborate, [C(8)OHC(1)im][BF(4)]. The surface tension was calculated using both mechanical and thermodynamic definitions, with consistent treatment of the long-range corrections. The simulations reproduce the available experimental values of surface tension with a maximum deviation of ±10%. This energetic characterization of the interface is completed by microscopic structural analysis of orientational ordering at the interface and density profiles along the direction normal to the interface. The presence of the hydroxyl group modifies the local structure at the interface, leading to a less organized liquid phase. The results allow us to relate the surface tension to the structural ordering at the liquid-vacuum interface.     

Electrophilic nitration of aromatics in ionic liquid solvents.

Potential utility of a series of 1-ethyl-3-methylimidazolium salts [emim][X] with X = OTf-, CF3COO-, and NO3- as well as [HNEtPri2][CF3COO] (protonated Hünig's base) ionic liquids were explored as solvent for electrophilic nitration of aromatics using a variety of nitrating systems, namely NH4NO3/TFAA, isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH, Cu(NO3)/TFAA, and AgNO3/Tf2O. Among these, NH4NO3/TFAA (with [emim][CF3COO], [emim][NO3]) and isoamyl nitrate/BF3.Et2O, isoamyl nitrate/TfOH (with [emim][OTf]) provided the best overall systems both in terms of nitration efficiency and recycling/reuse of the ionic liquids. For [NO2][BF4] nitration, the commonly used ionic liquids [emim][AlCl4] and [emim][Al2Cl7] are unsuitable, as counterion exchange and arene nitration compete. [Emim][BF4] is ring nitrated with [NO2][BF4] producing [NO2-emim][BF4] salt, which is of limited utility due to its increased viscosity. Nitration in ionic liquids is surveyed using a host of aromatic substrates with varied reactivities. The preparative scope of the ionic liquids was also extended. Counterion dependency of the NMR spectra of the [emim][X] liquids can be used to gauge counterion exchange (metathesis) during nitration. Ionic liquid nitration is a useful alternative to classical nitration routes due to easier product isolation and recovery of the ionic liquid solvent, and because it avoids problems associated with neutralization of large quantities of strong acid.     

Dynamically coated silica monolith with ionic liquids for capillary electrochromatography

An ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) was introduced as dynamic coating of a silica monolithic column for capillary electrochromatography of phenols and nucleoside monophosphates. The run-to-run and column-to-column repeatability of migration time for six phenols were satisfactory on this column with relative standard deviation values less than 0.90 and 4.31%, respectively. Anodic electroosmotic flow (EOF) was observed, which increased with the increase of [BMIM][BF4] concentration within 120 mM and when [BMIM][BF4] concentration was above 120 mM, EOF leveled off due to the saturation of [BMIM][BF4] on the monolith. Efficient separation of phenols and nucleoside monophosphates on this dynamically coated monolithic column was obtained, compared with a dynamically coated fused-silica column and unmodified silica monolithic column. The retention behavior of uncharged phenols is mainly manipulated by hydrophobic interactions due to the presence of butyl groups, and that of nucleoside monophosphates is governed by the electrostatic attraction mechanism based on the interaction between positively charged [BMIM][BF4] moieties and negatively charged phosphate groups. In addition, silica matrix also contributes to the separation resolution.     

Metal catalysed Michael additions in ionic liquids

The ionic liquid [bmim][BF4] (1-n-butyl-3-methylimidazolium tetrafluoroborate) was used as innovative solvent for a recyclable catalytic system active in metal promoted Michael additions employing Ni(acac)2 as catalyst.     

Facile synthesis of thiourea derivatives in ionic liquid

The synthesis of cinnamoyl thiourea derivatives from cinnamoyl isothiocyanate (CIT) with substituted aniline (RC6H4NH2) was investigated in the mostly used ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [Bmim][BF4]. Significant enhance-ments in reactivity, yield and reaction rate were achieved. The products could be recovered by simple filtration. [Bmim][BF4] couldbe recycled simply by removing water under vacuum and reused at least 9 times without significant decrease in activity.     

Lipase-catalyzed glucose fatty acid ester synthesis in ionic liquids

[reaction: see text] Glucose fatty acid ester synthesis with poly(ethylene glycol)-modified Candida antarctica lipase B (CAL-B) was performed in pure 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIM][BF(4)] (30% conversion) and in pure 1-butyl-3-methyl imidazolium hexafluorophosphate [BMIM][PF(6)] (35% conversion). In a solvent system composed of ionic liquid and 40% t-BuOH conversions up to 90% and isolated yields of up to 89% were achieved using fatty acid vinyl esters as acyl donors and commercial CAL-B.     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.