Preparation and Characterization of N,N′-Dialkyl-1,3-propanedialdiminium Chlorides,N,N′-Dialkyl-1,3-propanedialdimines,and Lithium N,N′-Dialkyl-1,3-propanedialdiminates

We describe convenient preparations of N,N′-dialkyl-1,3-propanedialdiminium chlorides, N,N′-dialkyl-1,3-propanedialdimines, and lithium N,N′-dialkyl-1,3-propanedialdiminates in which the alkyl groups are methyl, ethyl, isopropyl, or tert-butyl. For the dialdiminium salts, the N₂C₃ backbone is always in the trans-s-trans configuration. Three isomers are present in solution except for the tert-butyl compound, for which only two isomers are present; increasing the steric bulk of the N-alkyl substituents shifts the equilibrium away from the (Z,Z) isomer in favor of the (E,Z), and (E,E) isomers. For the neutral dialdimines, crystal structures show that the methyl and isopropyl compounds adopt the (E,Z) form, whereas the tert-butyl compound is in the (E,E) form. In aprotic solvents all four dialdimines (as well as the lithium dialdiminate salts) adopt cis-s-cis conformations in which there presumably is either an intramolecular hydrogen bond (or a lithium cation) between the two nitrogen atoms.     

N,N′-Diacylated imidazolidines and hexahydropyrimidines

A method for the preparation ofN-monoacyl imidazolidines and hexahydropyrimidines (as hydrochlorides) by interaction of monoacylated derivatives of ethylenediamine and trimethylenediamine with chloromethyl methyl ether was developed. Also a method for the preparation ofN,N-diacylimidazolidines and hexahydropyrimidines either by acylation of their monoacyl derivatives or by reaction of the correspondingN,N-diacyl alkylenediamine derivatives with dimethoxymethane, diacetoxymethane, 1,3,5-trioxane or chloromethyl methyl ether was designed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1452–1456, August, 1994.     

Poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide, N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide, poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide, and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide catalyzed formylation of amines and alcohols using ethyl formate under microwave irradiation

A simple, rapid, and efficient procedure for formylation of primary and secondary amines and alcohols using ethyl formate catalyzed with poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide (PCBS), N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide (TCBDA), poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide (PBBS) and also N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide (TBBDA) was adopted. The reactions were performed under microwave irradiation with high yields.     

Structures and stability of N9, N9 − and N9 + clusters

 Ab initio molecular orbital calculations for N₉, N⁻ ₉ and N⁺ ₉ isomers were carried out at the HF/ 6-31G*, B3PW91/6-31G*, B3LYP/6-31G* and MP2/ 6-31G* levels of theory. Stable equilibrium geometric structures were determined by harmonic vibrational frequency analyses at the HF/6-31G*, B3PW91/6-31G* and B3LYP/6-31G* levels of theory. The most stable free-radical N₉ cluster is structure 1 with C _{2 v} symmetry and that of anion N⁻ ₉ is structure 3 with C _s symmetry. Only one stable structure of the N⁺ ₉ cation with C _{2 v} symmetry was predicted. Their potential application as high-energy-density materials has been examined. Received: 15 June 1999 / Accepted: 11 October 1999 / Published online: 14 March 2000     

Improved Syntheses of N‐Desmethylcitalopram and N,N‐Didesmethylcitalopram

An improved and efficient synthesis of N‐desmethylcitalopram (2) and N,N‐didesmethylcitalopram (3) is presented. The method involved N‐demethylation of citalopram (1) using 1‐chloroethyl chloroformate to give 2 in 87% yield. Synthesis of 3 was accomplished by alkylation of 8 with 1‐(3‐bromopropyl)‐2,2,5,5‐tetramethyl‐1‐aza‐2,5‐disilacyclopentane (9).     

Solvent extraction of Eu, Th, U and am by N,N′-dimethyl-N,N′-dihexyl-3-thiopentanediamide and thenoyltrifluoroacetone

The diamide, N,N-dimethyl-N,N-dihexyl-3-thiopentanediamide (DMDHTPDA) was synthesized and thested for extraction of Eu(III), Am(III), Th(IV) and U(VI). DMDHTPDA shows a very weak complexation with these metal ions, which can be attributed to the soft base nature of the sulfur atom. None of the cations were extracted into the organic phase when DMDHTPDA alone was present. Synergistic extraction was measured for DMDHTPDA plus thenoyltrifluoroacetone. From the extraction dependencies on pH and extractant concentration, formation of mixed TTA+DMDHTPDA complexes were indicated. Except for the Th(IV) system, the separation and synergistic factors were smaller for the TTA+DMDHTPDA extractant than for the system of TTA+DMDHOPDA (the oxo ether analog of DMDHTPDA).     

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids at 298.15 K and ionic strengths of 0.1, 0.5, and 1.0 (KNO₃) were determined potentiometrically. The results were extrapolated to zero ionic strength by the equation with one individual parameter. The thermodynamic constants of dissociation were calculated. The results are compared with the corresponding data on related compounds.     

Calorimetric study of the solubilization of ethylenediamine,N,N-dimethylaminoethylamine and N,N,N′,N′-tetramethylethylenediamine by reversed AOT micelles

Distribution constants and standard enthalpies of transfer of ethylenediamine (en), N,N-dimethylaminoethylamine (dmen) and N,N,N,N-tetramethylethylenediamine (tmen) partitioned between n-heptane and water containing reversed sodium bis(2-ethylhexyl) sulfosuccinate (AOT) micelles as a function of the molar concentration ratio R (R=[water]/[AOT]) were evaluated by a calorimetric method. The results show that en, dmen and tmen molecules, solubilized in the reversed micelles, are distributed between the micellar aqueous core and the micellar palisade layer. An analysis of the thermodynamic parameters of the partition process demonstrates the peculiar solvent properties of the water containing reversed AOT micelles.     

Phosphate and arsenate electro-insertion processes into a N,N,N′,N′-tetraoctylphenylenediamine redox liquid

The electro-insertion of ions is a well-known phenomenon, which allows the transfer of anions or cations across phase boundaries to be monitored and driven electro-chemically. Extremely hydrophilic anions, such as phosphate and arsenate, are not usually observed to undergo electro-insertion. It is shown here that at organic redox liquid|water|electrode triple interfaces these anions can be forced electro-chemically to transfer into organic media.The transfer process of phosphate anions from aqueous buffer solutions into organic microdroplets of the redox liquid N,N,N^′,N^′-tetraoctylphenylenediamine (TOPD) is pH and concentration sensitive. It is shown that phosphate is transferred in the form of PO₄HK⁻ in the presence of phosphate buffer. Two distinct potential regions are identified and attributed to (i) interfacial redox processes at the liquid|liquid interface associated with deprotonation and (ii) bulk redox processes associated with anion transfer from the aqueous to the organic phase.The comparison of phosphate and arsenate electro-insertion processes suggests that arsenate is less hydrophilic and transferred into the organic phase preferentially.     

N,N′ and N,O chelated phosphenium cations containing aminotroponiminate or aminotroponate units

New phosphenium cations stabilized by bidentate monoanionic N-isopropyl-2-(isopropylamino)troponiminate or 2-(isopropylamino)troponate units have been synthesized. These complexes were characterized by ³¹P, ¹H and ¹³C NMR spectroscopies, and the molecular structures were determined by X-ray crystallography. These data indicate the formation of N,N′- and N,O-chelate derivatives having three-coordinate phosphorous atoms included in planar heterobicycles. Moreover, computational studies support the presence of high delocalization of the positive charge into the π-conjugated carbon backbone and of the high-lying phosphorus lone-pair orbital.     

N-Lithio-N,N′,N″,N″-tetramethyldiethylenetriamine and N′-Lithio-N,N,N″,N″-tetramethyldiethylenetriamine; Oxidative Coupling of Aminomethyllithium Derivatives

N-lithio-N,N′,N″,N″-tetramethyldiethylenetriamine (I-Li) is formed from 2,5,8,11-tetramethyl-2,5,8,11-tetraazadodecane (III) or from 2,5,8,11,14,17-hexamethyl-2,5,8,11,14,17-hexaazaoctadecane (IV) with n-BuLi or sec-BuLi, respectively, its isomer N′ -lithio-N,N,N″,N″,-tetramethyldiethylene-triamine (II-Li) from tris(2-dimethylaminoethyl)amine (V) with n-BuLi. IV results from treatment of N-lithiomethyl-N,N′,N″,N″-tetramethyldiethylenetriamine (PMDTA-Li) with 1,2-dibromoethane.     

New tetradentate N,N,N,N-chelating α-diimine ligands and their corresponding zinc and nickel complexes: synthesis, characterisation and testing as olefin polymerisation catalysts

A series of zinc complexes of the general formula {[ZnCl(ArN=C(An)-C(An)=NAr)](+)}(2)[Zn(2)Cl(6)](2-) (where Ar = 2-(1-benzyl-1H-1,2,3-triazol-4-yl)phenyl 2a, 2-(1-(1-phenylethyl)-1H-1,2,3-triazol-4-yl)phenyl 2b, 2-(1-phenyl-1H-1,2,3-triazol-4-yl)phenyl 2c; An = acenaphthene backbone) were prepared by the condensation of acenaphthenequinone with the corresponding o-triazolyl-substituted anilines (2-(1-benzyl-1H-1,2,3-triazol-4-yl)aniline 1a, 2-(1-(1-phenylethyl)-1H-1,2,3-triazol-4-yl)aniline 1b, 2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline 1c) which were formed by the copper(I)-catalyzed Huisgen[3+2] dipolar cycloaddition between 2-ethynylaniline and the corresponding azides in high yields, using anhydrous ZnCl(2) as the metal template, in boiling glacial acetic acid. Zinc complexes of the type [ZnCl(ArN=C(An)-C(An)=NAr)](+)[ZnCl(3)(NCCH(3))](-) (4a-c) were synthesized by crystallisation of the corresponding complexes 2a-c in acetonitrile, at -20 °C. After removal of zinc dichloride from complexes 2a-c by the addition of potassium oxalate, in dichloromethane, the tetradentate N,N,N,N-chelating α-diimine ligands of the type ArN=C(An)-C(An)=NAr (5a-c) were obtained. The new ligand precursors and zinc complexes were characterised by elemental analysis, (1)H and (13)C{(1)H} NMR spectroscopy, two-dimensional NMR spectroscopy, and X-ray diffraction. Reaction of the ligand precursors 5a-c with [NiBr(2)(DME)], in dichloromethane, gave nickel complexes of the type [NiBr(2)(ArN=C(An)-C(An)=NAr)] (6a-c). The results of single crystal X-ray diffraction characterisation and magnetic susceptibility measurements demonstrated that nickel complexes 6a-c possess octahedral geometries around the nickel atoms with variable configurations, the Br atoms of which can be ionized when dissolved in methanol. In preliminary catalytic tests, complexes 6a-c revealed to be active as catalysts for the polymerisation of norbornene and styrene, when activated by cocatalyst MAO. The characterisation of the polymers by (1)H and (13)C{(1)H} NMR spectroscopy, gel permeation chromatography/size-exclusion chromatography (GPC/SEC) revealed that these polymers were formed by a coordination addition mechanism.     

Thermal and FTIR spectral studies of N,N′-diphenylguanidine

Thermal decomposition of N,N??-diphenylguanidine (DPG) was investigated by simultaneous TG/DSC-FTIR techniques under nonisothermal conditions. Online FTIR measurements illustrate that aniline is a major product of DPG decomposition. The observation that the activation energy depends on the extent of conversion indicates that the DPG decomposition kinetics features multiple processes. The initial elimination of aniline from DPG involves two pathways because of the isomerization of DPG. Mass spectrometry and thin film chromatography suggest that there are two major intermediate products with the major one of C₂₁N₃H₁₇. The most probable kinetic model deduced through multivariate nonlinear regression method agrees well with the experimental data with a correlation coefficient of 0.9998. The temperature-independent function of conversion f(??), activation energy E and the pre-exponential factor A of DPG decomposition was also established through model-fitting method in this research.     

The structure effect of N,N,N′,N′-alkylamide in the extraction of uranium and thorium

In this paper, nine N,N,N,N-tetraalkyldiamides have been synthesized and the extracting ability for uranium and thorium under different conditions has been studied. All results were compared with those obtained by using tributyl phosphate (TBP) under exactly the same conditions. The extracting ability of thorium and uranium for different N,N,N,N-tetraalkyldiamides is discussed.     

Reactions of N,N′-diphenyl-p-quinonediimine with hydroquinone, α-tocopherol,and other antioxidants

Phenols (hydroquinone and -tocopherol) and heterocyclic aminophenols (2,2,4-trimethyl-6-ethoxy-1,2-dihyroquinoline) reduce N,N-diphenyl-p-quinonediimine (A) to the diamine. With difunctional hydrogen atom donors, the reaction rate is proportional to the concentrations of the reactants. The effective rate constants have been determined over a range of temperatures. In the reaction of A with -tocopherol, plots of rate versus initial concentrations are nonlinear, 2,6-Di-tert-butyl-4-methylphenol and 2,2,4-trimethyl-6-ethoxy-1,2-dihyroquinoline do not react with A under the same conditions.N.N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 417–420, February, 1992.     

Poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide) and N,N,N′,N′- tetrabromobenzene-1,3-disulfonamide as effective catalysts for conversion of aldehydes to 1,1-diacetates and acetals

Poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide) [PBBS] and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide [TBBDA] are effective catalysts for easy preparation of 1,1-diacetates from aldehydes and acetic anhydride, and for easy preparation of acetals using diols under microwave irradiation in the presence of SiO₂.     

Five coordinate complexes of N,N,N′,N′-tetraethylpyridine-2,6-dicarboxamide with copper Crystal and molecular structures of dichloro(N,N,N′,N′-tetraethylpyridine-2,6-dicarboxamido)copper(II) and chloro(perchlorato)(N,N,N′,N′-tetraethylpyridine-2,6-dicarboxamido)copper(II)

The title compound N,N,N′,N′-tetraethylpyridine-2,6-dicarboxamide (DEAP) forms a 1:1 complex with anhydrous CuCl₂, [Cu(DEAP)Cl₂], (1) which was crystallized from EtOH solution in the monoclinic space group P2_{1/ n} with cell constant, a = 10.024(1); b = 13.122(1); c = 14.404(1) Å β = 101.31(1)° V = 1857.8(3) ų and Z = 4. The chloro-perchlorato complex, [Cu(DEAP)Cl(ClO₄)], (2) obtained in near quantitative yield by reacting (1) with an excess of NaClO₄ in EtOH, crystallized in the monoclinic space group P2_{1/ n} with cell constants, a = 7.965(1); b = 25.827(2); c = 10.046(1) Å β = 98.81(1)° V = 2042.2(4) ų and Z = 4. Both (1) and (2) contain 5-coordinated copper linked to DEAP through O～N～O donor set of atoms with covalently bonded chlorine atoms in (1) and chlorine and perchlorate groups in (2). The coordination geometry is intermediate between square pyramidal and trigonal bipyramidal, and is probably best described as a trigonally distorted rectangular pyramid.     

Aminoamidines. 5. Synthesis and acetylation of N,N1,N2-triaryl-substituted β-aminoamidines

Triaryl-substituted -aminoamidines were obtained by the reaction of ,-unsaturated N-arylimidoyl chlorides with arylamines. Acylation of the products gave the products from monosubstitution at the -amino group. Triaryl-substituted -aminoamidines react with phosgene and with oxalyl chloride to form 4-aryliminoperhydropyrimidin-2-ones and 5-aryliminoperhydro-1,4-diazepine-2,3-diones, respectively.For previous communication, see [1].A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan' Scientific Center, Russian Academy of Sciences, 420083 Kazan'. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2633–2642, November, 1992.