Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Photoinduced dynamics of a cyanine dye: parallel pathways of non-radiative deactivation involving multiple excited-state twisted transients

Cyanine dyes are broadly used for fluorescence imaging and other photonic applications. 3,3′-Diethylthiacyanine (THIA) is a cyanine dye composed of two identical aromatic heterocyclic moieties linked with a single methine, –CH. The torsional degrees of freedom around the methine bonds provide routes for non-radiative decay, responsible for the inherently low fluorescence quantum yields. Using transient absorption spectroscopy, we determined that upon photoexcitation, the excited state relaxes along two parallel pathways producing three excited-state transients that undergo internal conversion to the ground state. The media viscosity impedes the molecular modes of ring rotation and preferentially affects one of the pathways of non-radiative decay, exerting a dominant effect on the emission properties of THIA. Concurrently, the polarity affects the energy of the transients involved in the decay pathways and further modulates the kinetics of non-radiative deactivation.     

Supported N-propylsulfamic acid on magnetic nanoparticles used as recoverable and recyclable catalyst for the synthesis of 2, 3-dihydroquinazolin-4(1H)-ones in water

An efficient and eco-friendly method is reported for the synthesis of 2-substituted-2,3-dihydroquinazolin -4（1 H）-ones from direct cyclocondensation of anthranilamide with aldehydes and ketones using N-propylsulfamic acid supported onto magnetic Fe₃O₄ nanoparticles（MNPs-PSA） as a recoverable and recyclable nanocatalyst in good to excellent yields in water at 70℃.The catalyst was readily separated using an external magnet and reusable without significant loss of their catalytic efficiency.     

Volumetric and viscosity studies of interactions between sodium phosphate salts and poly(propylene glycol) 400 in aqueous solutions at different temperatures

Density and sound velocity at the 288.15–313.15 K and viscosity at the 298.15–313.15 K temperature range at 5 K intervals for polypropylene glycol (PPG) in aqueous solutions of sodium di-hydrogen phosphate, di-sodium hydrogen phosphate and tri-sodium phosphate with salt mass fractions 0.00, 0.010 and 0.020 are reported at atmospheric pressure. From the experimental density and sound velocity data, the apparent specific volume, excess specific volume, isentropic compressibility and isentropic compressibility deviation values have been determined. The infinite dilution apparent specific volume and isentropic compressibility values of PPG have been obtained and from which the infinite dilution apparent specific volumes of transfer of PPG from water to aqueous sodium phosphate solutions have been obtained for the investigated salt concentrations and temperatures. The excess specific volume, isentropic compressibility and viscosity deviation are negative and decrease in magnitude as temperature, concentration of sodium phosphate and charge on the anion of electrolyte increases.     

Growth Orientation of the Mechanosynthesized Fluorapatite-Based Composite Nanopowders: Influence of Subsequent Thermal Treatment

Growth orientation of fluorapatite–zirconia nanopowders was investigated after mechanical activation and thermal annealing process in the range of 600–1,300 °C for 1 h. Results revealed that during heating of the composite nanopowders the transition of the monoclinic zirconia to tetragonal form and its stabilization by calcium fluoride originating from the decomposition of fluorapatite as well as the formation of a solid solution of calcium fluoride in zirconia occurred. The influence of annealing on the growth orientation of fluorapatite–zirconia composite nanopowders indicated that the crystal growth of fluorapatite was preferentially accentuated on the (002) face in the direction of the crystallographic c-axis after heat treatment. Based on FE–SEM observations, the experimental outcome was composed of both agglomerates and fine particles (~33 nm) after 600 °C, while annealing of the sample at 1,300 °C demonstrated the occurrence of abnormal grain growth.     

A simple accurate model for prediction of deflagration temperature of energetic compounds

A novel general method is introduced to predict deflagration temperature of organic energetic compounds containing at least –NNO₂, –ONO₂, or –CNO₂ groups. Deflagration temperature is an important safety parameter in working with dangerous energetic compounds and their environmental problems. It is shown that the contribution of some molecular structure parameters can be used to interpret thermal decomposition of an energetic compound. For 86 energetic materials (corresponding to 102 measured values) with different molecular structures, the new correlation has the root mean square (rms) and the average deviations of 23.8 and 19.0 K, respectively. The new method is also tested for some energetic compounds with complex molecular structures, e.g., two new organic energetic molecules N,N′-bis(1,2,4-triazol-3yl)-4,4′-diamino-2,2′,3,3′,5,5′,6,6′-octanitroazobenzene (BTDAONAB) and 2,4,6-trinitrophloroglucinol.