无水二氯化镍催化下醋酸烯丙酯与亚磷酸二酯的反应

利用Pd(O)催化下R~2R~3P(O)H(R~2,R~3=烷基、芳基、烷氧基)与芳基溴,烯基溴以及丁二烯反应合成芳基、烯基和烯丙基膦酸酯近年来有较多报道,但后者产率仅为10%。Fiaud曾报道了二苯基膦锂和醋酸烯丙酯的反应,但烯丙基膦化合物产率低于15%。我们曾发现醋酸烯丙酯在O,N-二(三甲硅基)乙酰胺(BSA)存在下,用Ni(cod)_3为催化剂与亚磷酸二酯反应,高产率地得到了烯丙基膦酸酯,而Pd(PPh_3)_4不能催化这个反应。我们认为反应的关键是亚磷酸二酯首先与BSA反应生成O,O-二烷基-O-三甲硅基亚磷酸酯     

PVC-二亚乙基三胺(DETA)-Pd对Heck反应的催化性能研究

以聚氯乙烯为原料,用较简单的方法得到了聚氯乙烯二亚乙基三胺负载钯配合物(PVC-DETA-Pd).PVC-DETA-Pd具有较高的热稳定性,可以满足Heck反应所需要的高温条件.在110℃、氮气氛围,四丁基溴化铵(TBAB)做溶剂的条件下,PVC-DETA-Pd催化溴苯与苯乙烯的反应产率可以达到99%.PVC-DETA-Pd在多种缚酸剂的存在下均可有效地催化芳基溴的Heck反应,但在三丁胺中具有最好的效果.在适当的反应条件下,以PVC-DETA-Pd为催化剂,各种带取代基芳基溴、芳基氯均可以有效地与乙烯基化合物反应,反应产率>70%.PVC-DETA-Pd还具有较好的重复使用性能.     

钯催化二溴代化合物自偶联环化合成二苯并[a,e]环辛四烯

由于独特的结构和广泛的应用,多取代环辛四烯及其苯并稠环衍生物的合成方法研究具有重要意义.本文报道了一种钯催化烯基溴化物与芳基溴化物的偶联反应.利用此钯催化的环化自偶联反应,以中等至较好的收率高选择性地从双溴代芳基或烯基化合物合成了多种二苯并[a,e]环辛四烯衍生物.     

钯催化形成C-P键的研究

本文对钯催化形成C-P键进行了较系统的研究。用取代芳基溴与苯基亚膦酸单酯在三乙胺及催化量的Pd(pph₃)₄存在下,在较温和条件下合成了一系列非对称二芳基膦酸酯,产率良好。为合成这类化合物提供了一个新的有用而简便的方法。     

钯卡宾参与的烯基芳烃轴手性化合物的合成

正Angew.Chem.Int.Ed.2016,55,2186~2190轴手性化合物因其具有独特的不可旋转的手性轴,在不对称催化等方面中有非常重要的应用.构建轴手性化合物最直接的方法之一是过渡金属催化的多组分的交叉偶联.中国科学技术大学顾振华课题组通过钯催化的溴代芳烃与腙化合物的偶联反应,以优异的产率得到了高对映选择性(ee约97%)的烯基芳烃轴手性化合物.反应通过芳基钯物种与卡宾形成钯卡宾中间体,最后迁移插入得到季碳钯物种,β-氢消除得到产物同时控制手性的产生.反应产率高,底物适用性好.产物可方便地转化为烯基膦配体(99%ee),并成功应用于不对称的烯丙基取代反应.     

2-[1-(1,2,4-三唑)甲基]-3-乙酰基-2,5-二取代芳基-1,3,4-噁二唑啉类化合物的合成

在冰醋酸存在下, 4-取代苯乙酮和溴素容易进行溴代反应, 得到α-溴-4-取代苯乙酮; 将其和1,2,4-三唑在丙酮中反应, 得到α-(1,2,4-三唑-1-基)-4-取代苯乙酮2; 在冰醋酸催化下, 2和4-取代苯甲酰肼1进行缩合, 得到相应酰腙衍生物3; 化合物3在乙酸酐的作用下环化生成一系列2-[1-(1,2,4-三唑)甲基]-3-乙酰基-2,5-二取代芳基-1,3,4-噁二唑啉4. 化合物4的结构经IR, 1H NMR, MS, 元素分析和单晶衍射确证.     

环钯化二茂铁亚胺-三苯基膦配合物的合成、表征及催化Suzuki反应研究

为筛选高效催化Suzuki反应的催化剂, 合成了3种新的环钯化二茂铁亚胺-三苯基膦配合物2~4, 经元素分析(或HRMS)、 红外光谱和核磁共振谱对其结构进行了表征, 并通过X射线单晶衍射测定了化合物3的晶体结构. 这些化合物容易合成, 在空气和溶液中稳定, 可用作芳基溴及杂芳基溴与苯基硼酸偶联的Suzuki反应催化剂. 使用摩尔分数为0.01%的催化剂3, 以2倍量的K3PO4为碱, 于110 ℃下, 在甲苯中反应5~15 h, 使具有不同电子和位阻效应的取代芳基溴及杂芳基溴能以较高的产率与苯基硼酸反应生成偶联产物; 与溴苯相比, 带吸电子基的溴苯反应活性较高, 催化剂的摩尔分数降低至0.001%时, 仍能得到较高产率, 而带强给电子基的溴苯如4-溴苯甲醚及带邻位取代基的溴苯在其它条件相同时, 需要延长反应时间才能得到较高的产率.     

含杂环二茂铁亚胺异环环钯化合物在Heck反应中的催化活性研究

含杂环二茂铁亚胺异环环钯化合物结构新颖、独特,其催化的Heck偶联反应具有底物范围广、反应条件温和、催化活性高且催化诱导期短等优点。芳基碘代物、芳基溴代物和芳基氯代物都可作为反应底物,其中化合物2应用于芳基溴代物和丙烯酸乙酯的反应得到了100%的收率。在反应中加入四丁基溴化铵,且提高反应温度到140℃,带有斥电子取代基的芳基溴代物、芳基氯代物仍能以较高的产率得到偶联产物。实验中利用薄层色谱监测反应。     

α-芳基烯基膦酸酯的合成研究进展

α-芳基烯基膦酸酯是一类重要的有机磷化合物,并且是合成其它有机磷分子的重要中间体.重点综述了过渡金属催化合成α-芳基烯基膦酸酯的进展,如磷氢化反应、C—C偶联反应和C—P偶联反应等,其它非金属催化条件下的几类合成方法也进行了概述.对α-芳基烯基膦酸酯的有机转化及在膦胺霉素衍生物合成中的应用也进行了探讨.     

三溴化金催化端炔与二芳基二硒醚反应合成炔基硒醚

炔基硒醚是合成一些有机硒化合物的重要起始物。本文研究发现,在三溴化金(Au Br3)催化下,端位炔和二芳基二硒醚在弱碱(如碳酸钾)存在下反应,生成炔基芳基硒醚,产率为69%~98%;在空气参与下,于80℃下进行反应,反应条件简单,且二硒醚的两个硒原子均可以被利用。二甲基亚砜(DMSO)是合适的溶剂,在极性较小的溶剂(如甲苯、四氢呋喃)中,此反应不能进行。芳基炔(如苯乙炔、对甲基苯乙炔、对氯苯乙炔等)、烯基炔(如环己烯乙炔)和烷基炔(如1-壬炔)均能顺利进行此反应。当芳基炔苯环的间位或邻位连有取代基时,反应产率较低(69%~82%),而对位无论是连有吸电子基还是给电子基,该反应均可以得到很高的产率(95%)。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.