硼硅酸盐矿物硼的化学分离纯化与同位素测定方法

采用碱熔法分解电气石样品,研究了3种不同纯化分离方法对硼回收和同位素测定的影响。实验表明:电气石中富含的Fe³⁺和Al³⁺对甲亚胺-H酸分光光度法测定硼含量有较大干扰,并在硼特效树脂交换分离中形成氢氧化物沉淀,阻塞交换柱;同时吸附溶液中硼元素造成回收率降低。本实验依次采用阴/阳离子混合树脂,硼特效树脂和阴/阳离子混合树脂三步离子交换进行电气石样品的纯化分离方法,实现了复杂基体中硼的完全回收（回收率99%）。在TIMS（Triton TI）采用H3和H4法拉第杯,并通过优化Zoom Optics参数（Focus Quad:15;Dispersion Quad:-85）实现静态双接收硼同位素组成测定。本方法对NIST SRM 951标准样品测定结果为¹¹B/¹⁰B=4.05044±0.00012（2σ,n=8,1μg B）,测定内外精度优于传统的动态峰跳扫。NIST SRM951测定结果为-0.3‰,表明预处理过程中无硼同位素分馏效应。天然样品硼同位素组成分别采用静态多接收PTIMS-Cs₂BO₂⁺法和MC-ICP-MS测定,数据点基本分布在1:1线上,说明MC-ICP-MS测定结果与PTIMS方法结果相一致。     

离子交换树脂去除氯化铝溶液中铁和镓工艺研究

本文采用离子交换树脂去除“一步酸溶法”提取氧化铝工艺中氯化铝溶出液的铁和镓杂质,考察了四种离子交换树脂去除杂质的能力。试验表明,D201MBP型离子交换树脂的杂质吸附率最高,最佳反应条件为树脂和溶出液质量比为1:10,反应温度70℃,反应时间30min,溶出液浓度1～1.2(原溶出液浓度设为1),Fe和Ga的吸附率可达93%和98%,且Al的损失率仅为3.9%。在室温下,用0.5%盐酸溶液洗脱饱和树脂,可达到良好的再生效果。     

Cd同位素地质样品的预处理方法研究

考察了文献报道的地质样品中Cd同位素测试前的化学分离纯化和富集方法(预处理方法)中的离子交换树脂单柱法回收率低的原因,并在该方法的基础上做了改进,优化了离子交换柱的洗涤顺序和洗液用量.改进后的离子交换树脂单柱法Cd回收率达99.82%,主要干扰元素(Sn、In、Zn、Pb)和基质元素的去除效果均较理想,能更好地满足Cd同位素的测定要求.     

(硬)石膏矿物中硼的提取分离及硼同位素测定

(硬)石膏作为海湖水蒸发过程中常见的硫酸盐矿物,能很好反映原始母液的组成及相关水文地质信息。硼属于易溶元素,常赋存于各种蒸发岩矿物中,目前硼同位素在矿床学,地球化学,古环境等地球科学中已得到广泛应用。由于(硬)石膏硼含量较低且难溶于水和盐酸,所以其硼含量及硼同位素组成特征研究较少。本研究通过物相转化与树脂交换法提取纯化(硬)石膏中的硼:首先使用碳酸氢铵与石膏混合,将微溶硫酸钙转化为难溶碳酸钙,随后使用盐酸溶解,一次转化率为85%,两次转化与分解可以保证石膏的完全溶解;之后经过硼特效树脂(Amberlite IRA 743)完成硼富集及阴阳离子混合树脂(Ion ExchangeⅡ和Dowex50W×8)对硼的纯化;最终通过He改进的正热电离质谱法测定硼同位素。测得试剂石膏中的硼含量为(3.501±0.128)μg/g(n=12,RSD=3.6%),平均加标回收率为100.5%;同时加标试剂石膏的δ~(11)B值为17.98‰±0.21‰(n=3,RSD=1.2%),说明整个流程的重复性良好,可以满足(硬)石膏中硼含量及其硼同位素组成的准确测定。     

珊瑚中硼的分离及其同位素组成的测定

介绍了用硼特效树脂和阴、阳混合离子交换树脂相结合进行珊瑚中硼的分离和纯化方法，满足了正热电离质谱法测定硼同位素的要求，并且对几个珊瑚样品进行了硼的分离和硼同位素组成的测定，结果满意，为研究珊瑚中的硼同位素示踪古海洋环境变化提供了可能。     

阳离子树脂交换分离-电感耦合等离子体质谱(ICP-MS)法测定地质石膏样品中硼

硼石膏近些年在水泥、沥青混合材料等领域应用广泛,其主要成分为CaSO4·2H2O和B2O3以及其他杂质,因此准确、快速测定石膏样品中的硼元素对石膏的应用、资源综合利用等方面具有重要意义。而国家标准GB/T 5484-2012《石膏分析方法》中并没有硼元素的化学分析方法,且相关文献报道也很少。目前测定硼元素主要采用电感耦合等离子体质谱法（ICP-MS）,样品前处理多采用酸溶法,而碱熔法应用不多,主要原因是碱熔后溶液中产生大量盐分影响等离子体焰的稳定性,而732型阳离子交换树脂能吸附大量的钠离子,同时吸附了钙、镍、铁及稀土等阳离子,减少盐分干扰。基于此原理,本文采用氢氧化钠碱熔-732型阳离子交换树脂交换分离,在线加入铑内标的方式,建立了ICP-MS法测定石膏中硼的方法,同时由于石膏国家标准物质不包含硼元素的含量,采用高纯硫酸钙分别与岩石标准物质、水系沉积物国家标准物质和土壤国家标准物质混合配置成人工标准物质,并讨论了熔矿体系、阳离子加入量与吸附时间、清洗液、同位素的选择等实验条件。本方法的检出限为0.76μg/g,精密度（RSD,n=7）为0.9%~1.7%,相对误差为1.56%~3.96%,加标回收率在97.5%~102%,该方法快速、准确,记忆效应小,适合石膏中硼元素的测定。     

AG50W-x8树脂分离去除钡的多原子离子对电感耦合等离子体质谱法测定稀土元素的质谱干扰

采用AG50W－x8阳离子交换树脂,以HNO3作为梯度淋洗剂,可有效地分离Ba和稀土元素,实验表明：以2mol/L HNO3淋洗时,99．5％的Ba被分离去除;以5mol/L HNO3淋洗时,稀土的回收率在96－110％之间。标准参考物质的分析结果显示测定值与标准值十分接近,表明AG50W－x8阳离子交换树脂分离可有效地去除Ba元素的多原子离子（BaO^ ,BaOH^ )对ICP－MS法测定稀土元素测定的质谱干扰,该方法准确,可靠。同时,为准确测定Eu提供了一条新的途径。     

柱撑杂多阴离子粘土的合成及表征

采用水热合成及离子交换法将Keggin结构三铁九钨镓酸盐杂多阴离子GaW9Fe3（H2O）3嵌入Zn2Al型阴离子粘土层间，得到了新型层柱状微孔材料Zn2Al－GaW9Fe3．用元素分析、XRD、IR、XPS等手段对产物的组成和结构进行了表征．结果表明，杂多阴离子嵌入Zn2Al型阴离子粘土层间，使柱撑杂多阴离子粘土具有1．0nm的通道高度．     

阴离子交换树脂分离富集/电感耦合等离子体质谱测定珊瑚中铅的同位素组成

在自制微型离子交换柱的基础上,建立了阴离子交换树脂AG1-X8分离富集珊瑚中痕量元素Pb的前处理方法,并使用高分辨电感耦合等离子体质谱(HR-ICP-MS)测定了海南橙黄滨珊瑚(porites lutea)样品中的Pb同位素比值。从全程空白值、洗脱曲线、回收率和基体分离情况等方面考察了不同洗脱剂的洗脱效果,结果表明,采用0.50 mol/L HNO3时的洗脱效果最好,方法的全程空白值为18 pg,Pb的回收率为99.6%,在洗脱过程中无拖尾现象,且能与Ca、Sr、Mg、Fe、Mn、Zn、Ba和U等珊瑚中的基体元素成功分离,对上述基体元素的去除率均能达到99.8%以上。使用该方法测得海南珊瑚样品中的207Pb/206Pb、208Pb/206Pb比值分别为0.850 5、2.087 0,相对标准偏差(RSDs,n=21)分别为0.12%和0.11%。该法质量控制良好,表明建立的AG1-X8阴离子交换树脂分离富集/HR-ICP-MS测定珊瑚中Pb的同位素组成的方法可靠,可推广应用于其它复杂样品中铅同位素组成的测定。     

多接收等离子质谱高精度测定现代人齿中Mg同位素

Mg是构成牙齿重要组分,其含量和同位素组成可记录居民生活地域、饮食习惯以及口腔健康信息等重要信息.本研究建立了高精度多接收等离子质谱(MC-ICP-MS)测定牙齿中Mg同位素方法.牙齿样品经微波消解仪消解,后采用AG50W-X8阳离子树脂分离溶液中的Mg元素,以1 mol/L HNO3为介质上柱,40 mL1 mol/L HNO3洗脱Na+等杂质离子,再以30 mL 1 mol/L HNO3收集Mg元素,60 mL 1 mol/L HNO3洗去其它杂质,蒸干Mg收集液.MC-ICP-MS进行Mg同位素组成测定.MC-ICP-MS仪器自身的质量分馏利用“样品-标准”交叉技术(“Sample-standard”bracketing technique)解决.实验结果表明,利用AG50W-X8阳离子树脂,可在保证Mg回收率的情况下,将牙齿样品中的Mg和其它基质元素彻底分离,且不造成同位素分馏.采用此方法对现代人离体牙牙釉质中Mg同位素进行分离测定,牙齿的δ25Mg在较大的范围变化(-1.38‰ ～4.59‰).本方法为利用人牙齿中Mg同位素研究Mg的暴露水平、环境污染等信息提供重要的实验和理论依据.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.