提高PBO纤维/环氧树脂复合材料界面结合的研究

本文采用表面化学蚀刻与溶胀法结合、化学偶联法与氩气低温等离子体表面处理技术结合的方法对聚苯撑苯并二。唑（PBO）纤维进行表面改性。探讨了不同改性方法对纤维表面性能的影响。同时，采用FTIR和SEM等方法对处理前后纤维表面化学结构及形态进行了表征。     

聚二甲基硅氧烷表面亲水性的研究

为了使聚二甲基硅氧烷(PDMS)具有较稳定的亲水性表面,利用氧等离子体技术对PDMS表面进行处理。研究了氧等离子体处理PDMS表面的时间、功率、氧气流量等参数对表面亲水性的影响,通过接触角测量和X-射线光电子能谱(XPS)对处理效果进行了评价。实验表明:PDMS经氧等离子体处理后放置700 h的表面接触角为72°,达到了持久改性的目的;XPS分析表明,表面亲水性的改善主要是由于表面极性成分的增加,最后讨论了氧等离子体处理PDMS表面的改性机理。     

疏水性聚丙烯酸酯人工晶状体的低温等离子体改性

通过低温等离子体表面改性技术对疏水性聚丙烯酸酯人工晶状体进行表面改性, 并对改性前后材料的表面结构、形貌和光学性能进行了表征. 静态水接触角结果显示, 经过氨等离子体处理后的人工晶状体亲水性效果最好, 同时最佳的改性时间为120 s, 改性功率为150 W. XPS分析结果进一步证实, 经等离子体处理后, 在人工晶状体表面引入了极性基团. 原子显微镜观察结果显示, 改性后材料表面更加凹凸不平, 粗糙度显著增加而透光率变化很小, 但过大功率改性的样品透光率明显下降. 时效性测试结果表明, 人工晶状体在改性14 d后疏水性恢复趋于稳定.     

聚丙烯微孔膜表面的空气等离子体处理

采用空气等离子体对聚丙烯微孔膜进行了处理，膜表面带有了氧元素，表面亲水性增强。微孔膜外表面改性程度较高，而孔内愈往深处改性程度愈弱。空气等离子体处理过的微孔膜力学性能下降。     

商品聚氯乙烯膜的等离子体表面处理改性的研究

利用辉光放电技术,将C_2H_2/CO_2/H_2的等离子体聚合物沉积处理聚氯乙烯商品膜表面进行改性。用红外光声光谱和扫描电子显微镜分析观察了等离子体改性的聚氯乙烯膜的结构和表面形态。测量了改性膜的水接触角,计算了它们的表面自由能,界面自由能以及表面功,从而研究了改性膜的亲水性。同时,利用热重分析仪(TGA)研究了改性膜的热稳定性。     

聚乙丙交酯电纺纳米纤维膜的等离子体改性及性能研究

采用等离子体表面处理的方法, 通过正交实验设计, 以纤维膜表面引入的氮含量为响应变量, 确定了NH3等离子体改性PLGA电纺纤维膜的最佳条件, 并在PLGA纤维膜表面成功地引入了功能性氨基基团. 研究结果表明, 改性后PLGA电纺纤维膜的力学性能有所降低, 但表面亲水性明显增强.     

聚丙烯微孔膜表面的等离子体接枝

通过氢气氛等离子体处理，在聚丙烯微孔膜表面接枝了聚丙烯酸，改善了膜表面的亲水性。接枝率与等离子体放电功率、放电时间和溶液浓度有关，微孔膜内外表面及不同位置接枝效率有差别。接枝后微也膜的表面孔径减少了。     

聚丙烯酸酯人工晶状体的表面改性研究：常压介质阻挡放电等离子体处理

本研究旨在利用常压介质阻挡放电（DBD）等离子体对疏水性聚丙烯酸酯人工晶状体（IOL）进行表面改性,研究其对IOL表面理化性能和生物相容性的影响.应用X射线光电子能谱（XPS）、场发射扫描电子显微镜（FESEM）、原子力显微镜（AFM）和静态水接触角（WCA）评价了改性前后IOL表面的化学组成、表面形貌和亲疏水性,并进一步基于血小板、巨噬细胞和晶状体上皮细胞（LECs）的体外黏附试验考察改性后IOL的生物相容性.结果显示表面改性后IOL的亲水性明显提高,WCA的变化与含氮/氧元素极性基团的引入和等离子体刻蚀作用引起的表面粗糙度增加有关.等离子体处理能明显减少IOL表面血小板和巨噬细胞的黏附,处理时间大于180s时能延迟LECs的伸展和增殖,同时保持其上皮细胞表型.常压DBD等离子体处理能有效地对疏水性聚丙烯酸酯IOL进行表面改性,显著改善其体外生物相容性,有望减轻该IOL眼内植入后的炎症异物反应,推迟前囊膜浑浊的发生.     

乙烯等离子体处理的云母表面结构及表面性质

用元素分析、色-质谱、裂解气相色谱和顺磁共振等方法研究了经乙烯等离子体处理的云母表面化学结构及处理过程。结果表明,云母颗粒表面形成了厚数十埃的等离子体聚乙烯膜,其化学结构与反应体系中无云母时得到的等离子体聚乙烯膜相同。通过扫描电镜观察到云母片表面的聚合膜具有规则的海星状花样,随处理时间的延长花样按比例长大。水与云母表面的接触角数据说明,乙烯等离子体处理使云母表面的疏水性提高到聚乙烯的水平,比氩气等离子体、硅烷偶联剂及钛酸酯偶联剂处理的效果均更为显著。     

微波等离子体对聚乙烯材料的表面改性

对高分子材料进行表面修饰,可以赋予材料表面新的物理和化学性能,提高材料的亲水性、粘结性、电镀和生物匹配性等．在表面改性方法中,新近发展的等离子体改性技术由于具有操作简单,工艺干法化,不影响材料本体结构和性能等优点而日益受到人们的重视［１,２］．微波等...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.