水性可聚合二苯甲酮光引发剂的简便合成

以甲基丙烯酸-N,N-二甲基氨基乙酯为亲核试剂,分别与4-溴甲基二苯甲酮和4,4’-二(溴甲基)二苯甲酮在20℃下反应,并过简单的过滤,得到了两种水性可聚合二苯甲酮类光引发剂:4-[N-(2-甲基丙烯酰氧基乙基)二甲基溴化铵甲基]二苯甲酮(收率79.2%)和4,4’-双[N-(2-甲基丙烯酰氧基乙基)二甲基溴化铵甲基]二苯甲酮(收率79.7%)。产物用NMR、IR和元素分析进行了表征。     

三臂ATRP引发剂的合成及应用

分别以三乙醇胺、三聚氰胺为原料,通过酰化反应合成了三种具有配体功能的三臂原子转移自由基聚合(ATRP)引发剂:三[2-(2-溴异丁酰氧基)乙基]胺,三[2-(4-氯甲基苯甲酰氧基)乙基]胺和2,4,6-三(2-溴异丁酰胺基)-1,3,5-三嗪,收率分别为81%,69%和83%。以三[2-(2-溴异丁酰氧基)乙基]胺既作引发剂又作配体进行甲基丙烯酸甲酯(MMA)的ATRP乳液聚合,结果表明反应前期与中期具有活性/可控特征。     

硫酸铵水溶液中分散聚合法制备两性共聚物P(AM-co-AA-co-DAC-co-DMC)

利用分散聚合技术,在硫酸铵水溶液中以丙烯酰胺(AM)、丙烯酸(AA)、丙烯酰氧乙基三甲基氯化铵(DAC)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,合成了两性共聚物P(AM-co-AA-co-DAC-co-DMC).用FTIR,13C-NMR,TEM等方法表征了聚合物的结构和组成.考察了不同分散稳定剂、正负离子单体配比和pH对分散聚合的影响,并对P(AM-co-AA-co-DAC-co-DMC)水基分散聚合条件及稳定性进行了一些探讨.实验表明,在硫酸铵水溶液中制得较稳定的P(AM-co-AA-co-DAC-co-DMC)分散体系,应选用非离子型或阳离子型的分散稳定剂,如聚乙烯吡咯烷酮(PVP)、聚甲基丙烯酰氧乙基三甲基氯化铵(PDMC)、聚丙烯酰氧乙基三甲基氯化铵(PDAC),而其pH应在2到4之间.当选用占总质量1.5%的聚乙烯吡咯烷酮(PVP)为分散稳定剂,引发温度为40℃,正负离子单体物质的量比值大于1,pH=3时,可以制得总离子度超过25%的纳米级两性聚合物.     

采用含原位聚合阴离子交换整体柱的微芯片分离氨基酸

采用原位聚合法,制备了以2-甲基丙烯酰氧乙基三甲基氯化铵(META)为功能单体的强碱性季铵盐离子交换型微整体柱,构建了带微整体柱的复合式微流控芯片;以氨基酸-H2O2-Lum inol化学发光体系为样品对象,根据氨基酸等电点的差异,在原位聚合微整体柱上进行分离实验。进行了苯丙氨酸-白氨酸、苯丙氨酸-组氨酸、苯丙氨酸-精氨酸3组氨基酸混合体系的分离,获得了很好的分离结果。优化并讨论了影响氨基酸分离效果的多种因素,如缓冲液pH值、洗脱液pH值和洗脱液流速等。在优化条件下,苯丙氨酸-精氨酸的分离度达到1.6,结果显示出整体柱与微流控体系相结合的可行性。     

双功能离子液体的合成及二氧化碳捕集性能

采用两步法合成了新型功能化离子液体1-甲氧基乙基-3-甲基咪唑甘氨酸([C_3O_1mim][Gly]),并研究了其对CO_2的吸收性能.利用核磁共振、红外光谱及热重分析等手段进行表征,验证了该离子液体的结构,且发现其具有较高的热稳定性.对比单乙醇胺(MEA),考察了[C_3O_1mim][Gly]在不同温度下对CO_2的捕集能力,结果表明,[C_3O_1mim][Gly]在40℃下的吸收容量可达1.26 mol CO_2/mol IL,远高于MEA,这表明[C_3O_1mim][Gly]对CO_2具有良好的吸收能力,吸收容量随着温度升高而降低.该离子液体同时具有良好的循环稳定性,进行5次吸收解吸操作后仍可保持较高的CO_2吸收量.对该离子液体吸收CO_2进行了动力学研究,结果表明,Pseudo-second-order模型能够较好地描述该吸收过程.     

乙酸对阳离子型PVAc乳液粒径的影响

以醋酸乙烯酯(VAc)和甲基丙烯酰氧基乙基三甲基氯化铵为主单体,Gemini超支化双子型阳离子表面活性剂和OP-10为复合乳化剂,通过乳液聚合制得一系列阳离子型聚醋酸乙烯酯乳液(1n),考察了VAc的主要杂质乙酸对1n粒径的影响.研究结果表明,乙酸含量增多时,Gemini超支化阳离子表面活性剂的临界胶束浓度和表面张力都...     

具有阳离子表面活性ATRP引发剂的合成

以2-溴异丁酰溴、2-溴乙醇、6-氯-1-己醇及N,N-二甲基正十二烷基胺为主要原料,分别通过两步或三步反应合成了具有阳离子表面活性的原子转移自由基聚合(ATRP)引发剂——N-[2-(2-溴-2-甲基丙酰氧基)乙基]-N,N-二甲基正十二烷基溴化铵或N-[6-(2-溴-2-甲基丙酰氧基)己基]-N,N-二甲基正十二烷基碘化铵,其结构经1H NMR,13C NMR,IR和元素分析表征。     

具有纳米结构的聚偏氟乙烯/1-乙烯基-3-丁基咪唑氯盐离子液体复合材料的结晶行为

用示差扫描量热(DSC)、偏光显微镜(POM)及X射线衍射(XRD)分析考察了具有纳米结构的聚偏氟乙烯(PVDF)/1-乙烯基-3-丁基咪唑氯盐离子液体([VBIM][Cl])复合材料(PVDF/[VBIM][Cl])中经[VBIM][Cl]接枝的PVDF(PVDF-g-[VBIM][Cl])纳米微区对PVDF结晶行为的影响.研究结果表明,[VBIM][Cl]化学接枝在PVDF的分子链上,在PVDF/[VBIM][Cl]复合材料中,PVDF-g-[VBIM][Cl]嵌段形成大量纳米微区,分散在PVDF基体中.PVDF-g-[VBIM][Cl]纳米微区能够显著提高PVDF熔体结晶温度(Tc)并显著降低PVDF晶体的等温结晶时间.与纯PVDF相比,在纳米结构的PVDF/[VBIM][Cl]复合材料中,PVDF-g-[VBIM][Cl]纳米微区大大提高了PVDF晶体的成核速率,PVDF的球晶尺寸明显减小.由于[VBIM][Cl]完全"受限"于PVDF-g-[VBIM][Cl]纳米微区中,无法与PVDF分子链发生相互作用,因此纳米结构的PVDF/[VBIM][Cl]复合材料最终以非极性的α晶体为主.由于PVDF-g-[VBIM][Cl]纳米微区与PVDF基体具有热力学不相容性,因此其界面处的PVDF分子链处于部分有序的状态,有助于PVDF晶体的成核,加速了PVDF晶体的结晶速率.     

6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪及其共聚物的合成

以6-甲基-3-羟乙基-3,4-2H-1,3-苯并噁嗪(MB-OH)和甲基丙烯酰氯为原料, 通过酯化反应合成了6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪(MBEM). 采用自由基溶液聚合法, 以偶氮二异丁腈(AIBN)为引发剂, 以甲苯为溶剂, 以MBEM与N-苯基马来酰亚胺(NPMI)为单体, 合成了6-甲基-3-甲基丙烯酰氧乙基-3,4-2H-1,3-苯并噁嗪-co-N-苯基马来酰亚胺共聚物[P(MBEM-co-NPMI)]. 分别对MB-OH, MBEM, P(MBEM-co-NPMI)进行加热固化, 得到相应的交联聚合物PMB-OH, PMBEM和P[P(MBEM-co-NPMI)]. 对其结构、分子量和热性能进行了表征. 结果表明, PMB-OH, PMBEM, P[P(MBEM-co-NPMI)]的最大损耗因子tanδ_max对应的玻璃化转变温度(T_g)分别为92, 129和181℃, 最大损耗模量G"_max对应的T_g分别为56, 91和156℃. 在N₂气氛围下, PMB-OH, PMBEM, P[P(MBEM-co-NPMI)]失重5%的温度分别为257, 244和260℃; 失重10%的温度分别为280, 266和284℃; 800℃的残炭率分别为23.2%, 17.8%和14.0%. 表明P[P(MBEM-co-NPMI)]具有优异的耐热性能.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.