离子阱中以声子为媒介的多体量子纠缠与逻辑门

高保真度的多离子纠缠和量子逻辑门是离子阱量子计算的基础.在现有的方案中, M?lmer-S?rensen门是比较成熟的实现多离子纠缠和量子逻辑门的实验方案.近年来,还出现了通过设计超快激光脉冲序列,在Lamb-Dicke区域以外实现超快量子纠缠和量子逻辑门的方案.这些方案均借助离子链这一多体量子系统的声子能级来耦合离子之间的自旋状态,并且均通过调制激光脉冲或设计合适的脉冲序列解耦多运动模式,来提高纠缠门的保真度.本文从理论和实验层面分析了这些多体量子纠缠和量子逻辑门操作的关键技术,揭示了离子阱中利用激光场驱动离子链运动态,通过非平衡过程中的非线性相互作用,来实现量子逻辑门的基本物理过程.     

基于二维囚禁离子实现受控非门、交换门和相位门

研究了二维囚禁离子与光场相互作用系统中几种基本量子逻辑门的实现方案.通过适当选取激光场与离子内部跃迁频率的失谐量,简化了系统的哈密顿量,并进一步推导出受控非门(C-NOT门)、交换门与相位门的实现方法.在此过程中,系统需满足Lamb-Dicke极限,并要求光场的Rabi振荡频率远远小于离子的振动频率. 关键词： 囚禁离子 受控非门(C-NOT门) 交换门 相位门     

由各向异性海森伯自旋环链组成的量子位及其通用量子逻辑门

研究了各向异性耦合的三粒子海森伯自旋环链团簇在随时间变化的磁场中的运动.该系统的哈密顿量具有SU(2)代数结构.用代数动力学方法对此系统进行求解，得到了严格的解析解.基于严格解, 可以构造一位量子逻辑门.通过调节磁场强度和频率, 就可以控制该量子逻辑门, 实现一位量子逻辑门的任何操作. 关键词： 代数动力学 自旋环链团簇 一位量子逻辑门     

利用SPDC和PBS实现受控非门的有效方案

任意一个N量子比特逻辑运算可以由一系列单量子比特门和受控非门实现[1].因此,这两种量子逻辑门的实现是研究量子计算自然的目标.虽然单量子比特门易于实现,但是由于光子间的相互作用比较弱,所以很难实现受控非门的操作.本文基于T.B.Pittman[2]与A.L. Migdall[3]等人的工作,提出了利用自发参量下转换(SPDC)过程采用多点延时探测触发的方法获得高效单光子源,提高实现受控非门效率的理论方案.     

离子阱中共线两离子基本量子逻辑门的实现

运用量子理论,在Paul阱中共线两离子系统的精确解的基础上,结合量子编码方法,讨论了囚禁两离子系统量子非门(单比特逻辑非门、两比特逻辑非门)实现的理论方法,提出利用质心振动模和两离子构建量子与门的理论方法(不需第三个离子),通过分析,证明了囚禁两离子系统在相对量子数l=1时,可制备为单比特量子非门和量子与门的线性叠加,可以完成并行量子逻辑操作,量子非门和量子与门是构成量子计算机制基本结构单元,值得我们在量子信息实验研究中加以考虑.     

基于频率调制激光驱动的囚禁离子几何相位逻辑门

为了避免激光相位的起伏对几何相位逻辑门保真度的影响, 提出一种基于囚禁离子的量子几何相位逻辑门的新方案。该机制是利用一束频率调制的行波激光场作用于两个囚禁离子上实现的。它的优点有：操作简单,仅需一步就能实现。不灵敏于激光场的相位也不需要对囚禁离子进行个别寻址。     

基于频率调制激光驱动的囚禁离子几何相位逻辑门

为了避免激光相位的起伏对几何相位逻辑门保真度的影响,提出一种基于囚禁离子的量子几何相位逻辑门的新方案.该方案是利用一束频率调制的行波激光场作用于两个囚禁离子上实现的.它的优点有:操作简单,仅需一步就能实现,不灵敏于激光场的相位也不需要对囚禁离子进行个别寻址.     

用腔场中的二能级势阱离子实现量子逻辑门

利用光腔中的势阱粒子同时与外激光场和腔场发生相互作用的特性，我们提出了一种量子逻辑门的实现方案。在该方案中，我们采用文献[10-12]中的模型。文献[11-12]中实现的逻辑门是以离子内态和运动态作为量子比特，腔态充当辅助比特在计算过程中保持在基态。而[10]要求离子内态保持为基态，利用离子运动态和腔态构成量子比特。与文献[10-12]不同的是，我们实现的量子逻辑门是以粒子内态和腔态作为比特，而势阱离子的运动态作为辅助比特始终保持在基态。而且，我们对该方案的实验要求进行了讨论。     

在腔耦合的超导量子比特中实现几何量子信息处理

用量子空腔耦合的超导电荷比特器件被认为是实现量子信息处理的相当有希望的体系之一.如何在这种可集成的量子体系中实现高保真度的操作是量子信息处理领域的重要课题.文章介绍作者最近提出的在量子腔耦合的超导量子比特中用具有内禀容错功能的几何操作来实现普适量子逻辑门,产生多比特量子纠缠及实现量子纠错编码的一个可行方案.     

多逻辑比特表面码结构设计及其逻辑CNOT门实现

量子计算因具有并行处理能力,相比于经典计算有着指数级的加速,但量子系统具有脆弱性,极易受到噪声的影响,量子纠错码是克服量子噪声的有效手段.量子表面码是一种拓扑稳定子码,由于其结构上的最近邻居特点和较高的容错阈值,表面码在大规模容错量子计算方面具有巨大的潜力.目前已有的基于边界的表面码均为编码一个逻辑比特的表面码,本文主要研究基于边界如何实现多逻辑量子比特的编码,包括设计表面码的结构,根据结构找出对应的稳定子和逻辑操作,进一步根据稳定子设计出基于稳定子实现的编码线路;在研究基于测量和纠正的单量子比特间CNOT实现原理和基于融合操作和分割操作的单逻辑量子比特表面码间CNOT门实现原理的基础上,优化了基于融合操作和分割操作的单逻辑量子比特表面码间CNOT门实现方案,将其扩展到所设计的多逻辑量子比特表面码上实现了多逻辑量子比特表面码之间的CNOT操作,并通过仿真验证量子线路的正确性.本文设计的多逻辑比特表面码克服了单比特表面码不能密铺于量子芯片的缺点且提高了某些逻辑操作的长度,提高了容错能力.基于联合测量的思想降低了对辅助比特的要求且减小了实现过程中对量子资源的需求.     

Implementation of a Controlled-Phase Gate and Deutsch-Jozsa Algorithm with Superconducting Charge Qubits in a Cavity

Based on superconducting quantum interference devices （SQUIDs） coupled to a cavity, we propose a scheme for implementing a quantum controlled-phase gate （QPG） and Deutsch-Jozsa （D J） algorithm by a controllable interaction. In the present scheme, the SQUID works in the charge regime, and the cavity field is ultilized as quantum data-bus, which is sequentially coupled to only one qubit at a time. The interaction between the selected qubit and the data bus, such as resonant and dispersive interaction, can be realized by turning the gate capacitance of each SQUID. Especially, the bus is not excited and thus the cavity decay is suppressed during the implementation of DJ algorithm. For the QPG operation, the mode of the bus is unchanged in the end of the operation, although its mode is really excited during the operations. Finally, for typical experiment data, we analyze simply the experimental feasibility of the proposed scheme. Based on the simple operation, our scheme may be realized in this solid-state system, and our idea may be realized in other systems.     

Quantum Privacy Amplification for a Sequence of Single Qubits

We present a scheme for quantum privacy amplification (QPA) for a sequence of single qubits. The QPA procedure uses a unitary operation with two controlled-not gates and a Hadamard gate. Every two qubits are performed with the unitary gate operation, and a measurement is made on one photon and the other one is retained.The retained qubit carries the state information of the discarded one. In this way, the information leakage is reduced.The procedure can be performed repeatedly so that the information leakage is reduced to any arbitrarily low level. With this QPA scheme, the quantum secure direct communication with single qubits can be implemented with arbitrarily high security. We also exploit this scheme to do privacy amplification on the single qubits in quantum information sharing for long-distance communication with quantum repeaters.     

Quantum Privacy Amplification for a Sequence of Single Qubits

We present a scheme for quantum privacy amplification （QPA） for a sequence of single qubits. The QPA procedure uses a unitary operation with two controlled-not gates and a Hadamard gate. Every two qubits are performed with the unitary gate operation, and a measurement is made on one photon and the other one is retained. The retained qubit carries the state information of the discarded one. In this way, the information leakage is reduced. The procedure can be performed repeatedly so that the information leakage is reduced to any arbitrarily low level. With this QPA scheme, the quantum secure direct communication with single qubits can be implemented with arbitrarily high security. We also exploit this scheme to do privacy amplification on the single qubits in quantum information sharing for long-distance communication with quantum repeaters.     

Two simple schemes for implementing Toffoli gate via atom--cavity field interaction in cavity quantum electrodynamics

This paper proposes two schemes for implementing three-qubit Toffoli gate with an atom (as target qubit) sent through a two-mode cavity (as control qubits). The first scheme is based on the large-detuning atom--cavity field interaction and the second scheme is based on the resonant atom-field interaction. Both the situations with and without cavity decay and atomic spontaneous emission are considered. The advantages and the experimental feasibility of these two schemes are discussed.     

Scheme for Remote Implementation of Partially Unknown Quantum Operation of Two Qubits in Cavity QED

By constructing the recovery operations of the protocol of remote implementation of partially unknown quantum operation of two qubits [An-Min Wang: Phys. Rev. A 74 (2006) 032317] with two-qubit Cnot gate and single qubit logic gates, we present a scheme to implement it in cavity QED. Long-lived Rydberg atoms are used as qubits, and the interaction between the atoms and the field of cavity is a nonresonant one. Finally, we analyze the experimental feasibility of this scheme.     

Quantum logic gates operation using SQUID qubits in bimodal cavity

We present a scheme to realize the basic two-qubit logic gates such as the quantum phase gate and SWAP gate using a detuned microwave cavity interacting with three-level superconducting-quantum-interference-device (SQUID) qubit(s), by placing SQUID(s) in a two-mode microwave cavity and using adiabatic passage methods. In this scheme, the two logical states of the qubit are represented by the two lowest levels of the SQUID, and the cavity fields are treated as quantized. Compared with the previous method, the complex procedures of adjusting the level spacing of the SQUID and applying the resonant microwave pulse to the SQUID to create transformation are not required. Based on superconducting device with relatively long decoherence time and simplified operation procedure, the gates operate at a high speed, which is important in view of decoherence.     

Controlled decoherence of three-level rf-SQUID qubit with asymmetric potential

A scheme is proposed to controll the decoherence of three-level rf-SQUID qubit with asymmetric potential by designing an external electric circuit for superconductive flux qubit. The results show that it may not only raise the gate speed but also extend decoherence time for a three-level structure.     

Heralded linear optical quantum Fredkin gate based on one auxiliary qubit and one single photon detector

Linear optical quantum Fredkin gate can be applied to quantum computing and quantum multi-user communication networks. In the existing linear optical scheme, two single photon detectors （SPDs） are used to herald the success of the quantum Fredkin gate while they have no photon count. But analysis results show that for non-perfect SPD, the lower the detector efficiency, the higher the heralded success rate by this scheme is. We propose an improved linear optical quantum Fredkin gate by designing a new heralding scheme with an auxiliary qubit and only one SPD, in which the higher the detection efficiency of the heralding detector, the higher the success rate of the gate is. The new heralding scheme can also work efficiently under a non-ideal single photon source. Based on this quantum Fredkin gate, large-scale quantum switching networks can be built. As an example, a quantum Bene~ network is shown in which only one SPD is used.     

Operating a geometric quantum gate by external controllable parameters

A scheme to perfectly preserve an initial qubit state in geometric quantum computation is proposed for a single-qubit geometric quantum gate in a nuclear magnetic resonance system. At first, by adjusting some magnetic field parameters, one can let the dynamic phase be proportional to the geometric phase. Then, by controlling the azimuthal angle in the initial state, we may realize a geometric quantum gate whose fidelity is equal to one under cyclic evolution. This means that the quantum information is no distortion in the process of geometric quantum computation.