Prediction of developing turbulent flow in 90°‐curved ducts using linear and non‐linear low‐Re k–ε models

This paper reports the outcome of applying two different low‐Reynolds‐number eddy‐viscosity models to resolve the complex three‐dimensional motion that arises in turbulent flows in ducts with 90^° bends. For the modelling of turbulence, the Launder and Sharma low‐Re k–ε model and a recently produced variant of the cubic non‐linear low‐Re k–ε model have been employed. In this paper, developing turbulent flow through two different 90^° bends is examined: a square bend, and a rectangular bend with an aspect ratio of 6. The numerical results indicate that for the bend of square cross‐section the curvature induces a strong secondary flow, while for the rectangular cross‐section the secondary motion is confined to the corner regions. For both curved ducts, the secondary motion persists downstream of the bend and eventually slowly disappears. For the bend of square cross‐section, comparisons indicate that both turbulence models can produce reasonable predictions. For the bend of rectangular cross‐section, for which a wider range of data is available, while both turbulence models produce satisfactory predictions of the mean flow field, the non‐linear k–ε model returns superior predictions of the turbulence field and also of the pressure and friction coefficients. Copyright © 2006 John Wiley & Sons, Ltd.     

On a higher‐order bounded discretization scheme

This paper presents a new higher‐order bounded scheme, weighted‐average coefficient ensuring boundedness (WACEB), for approximating the convective fluxes in solving transport equations with the finite volume difference method (FVDM). The weighted‐average formulation is used for interpolating the variables at cell faces and the weighted‐average coefficient is determined from normalized variable formulation and total variation diminishing (TVD) constraints to ensure the boundedness of solution. The new scheme is tested by solving three problems: (1) a pure convection of a box‐shaped step profile in an oblique velocity field, (2) a sudden expansion of an oblique velocity field in a cavity, and (3) a laminar flow over a fence. The results obtained by the present WACEB are compared with the UPWIND and the QUICK schemes and it is shown that this scheme has at least second‐order accuracy, while ensuring boundedness of solutions. Moreover, it is demonstrated that this scheme produces results that better agree with the experimental data in comparison with other schemes. Copyright © 2000 John Wiley & Sons, Ltd.     

TVD格式在超音速喷管三维粘性流动求解中的应用

详细给出了任意三维曲线坐标系中Ｎｏｖｉｅｒ－Ｓｔｏｋｅｓ方程的对流项ＴＶＤ格式的构造过程，建立了数值求解三维粘性流动的计算方法，应用该方法对三维超音速喷管中有激波及无激波情况下的两种工况的层流流场进行了数值求解，并与实验做了对比。结果表明本文建立的计算方法具有较高的精度，同时也证明ＴＶＤ格式具有分辩率高，稳定收敛等优点，为进一步开展叶栅流场及紊流的研究打下了基础。     

Nonlinear turbulence models for predicting strong curvature effects

Prediction of the characteristics of turbulent flows with strong streamline curvature, such as flows in turbomachines, curved channel flows, flows around airfoils and buildings, is of great importance in engineering applications and poses a very practical challenge for turbulence modeling. In this paper, we analyze qualitatively the curvature effects on the structure of turbulence and conduct numerical simulations of a turbulent Uduct flow with a number of turbulence models in order to assess their overall performance. The models evaluated in this work are some typical linear eddy viscosity turbulence models, nonlinear eddy viscosity turbulence models （NLEVM） （quadratic and cubic）, a quadratic explicit algebraic stress model （EASM） and a Reynolds stress model （RSM） developed based on the second-moment closure. Our numerical results show that a cubic NLEVM that performs considerably well in other benchmark turbulent flows, such as the Craft, Launder and Suga model and the Huang and Ma model, is able to capture the major features of the highly curved turbulent U-duct flow, including the damping of turbulence near the convex wall, the enhancement of turbulence near the concave wall, and the subsequent turbulent flow separation. The predictions of the cubic models are quite close to that of the RSM, in relatively good agreement with the experimental data, which suggests that these models may be employed to simulate the turbulent curved flows in engineering applications.     

Runge–Kutta time‐stepping schemes with TVD central differencing for the water hammer equations

In the present study, Runge–Kutta schemes are used to simulate unsteady flow in elastic pipes due to sudden valve closure. The spatial derivatives are discretized using a central difference scheme. Second‐order dissipative terms are added in regions of high gradients while they are switched off in smooth flow regions using a total variation diminishing (TVD) switch. The method is applied to both one‐ and two‐dimensional water hammer formulations. Both laminar and turbulent flow cases are simulated. Different turbulence models are tested including the Baldwin–Lomax and Cebeci–Smith models. The results of the present method are in good agreement with analytical results and with experimental data available in the literature. The two‐dimensional model is shown to predict more accurately the frictional damping of the pressure transient. Moreover, through order of magnitude and dimensional analysis, a non‐dimensional parameter is identified that controls the damping of pressure transients in elastic pipes. Copyright © 2006 John Wiley & Sons, Ltd.     

The numerical simulation of turbulent flows of Newtonian and a sort of non-Newtonian fluid in 180-degree square sectioned bend

Using k-εmodel of turbulence and measured wall functions.turbulent flows ofNewtonian(pure water)and a sort of non-Newtonian fluid(dilute,drag-reduction solutionof polymer in a180-degree curved bend were simulated numerically.The calculated resultsagreed well with the measured velocity profiles.On the basis of calculation andmeasurement,appropriateness of turbulence model to complicated flow in which the large-scale vortex exists was analyzed and discussed.     

Implicit preconditioned high‐order compact scheme for the simulation of the three‐dimensional incompressible Navier–Stokes equations with pseudo‐compressibility method

This paper combines the pseudo‐compressibility procedure, the preconditioning technique for accelerating the time marching for stiff hyperbolic equations, and high‐order accurate central compact scheme to establish the code for efficiently and accurately solving incompressible flows numerically based on the finite difference discretization. The spatial scheme consists of the sixth‐order compact scheme and 10th‐order numerical filter operator for guaranteeing computational stability. The preconditioned pseudo‐compressible Navier–Stokes equations are marched temporally using the implicit lower–upper symmetric Gauss–Seidel time integration method, and the time accuracy is improved by the dual‐time step method for the unsteady problems. The efficiency and reliability of the present procedure are demonstrated by applications to Taylor decaying vortices phenomena, double periodic shear layer rolling‐up problem, laminar flow over a flat plate, low Reynolds number unsteady flow around a circular cylinder at Re = 200, high Reynolds number turbulence flow past the S809 airfoil, and the three‐dimensional flows through two 90°curved ducts of square and circular cross sections, respectively. It is found that the numerical results of the present algorithm are in good agreement with theoretical solutions or experimental data. Copyright © 2011 John Wiley & Sons, Ltd.     

A gas‐kinetic scheme for the simulation of turbulent flows on unstructured meshes

This paper presents a numerical method for simulating turbulent flows via coupling the Boltzmann BGK equation with Spalart–Allmaras one equation turbulence model. Both the Boltzmann BGK equation and the turbulence model equation are carried out using the finite volume method on unstructured meshes, which is different from previous works on structured grid. The application of the gas‐kinetic scheme is extended to the simulation of turbulent flows with arbitrary geometries. The adaptive mesh refinement technique is also adopted to reduce the computational cost and improve the efficiency of meshes. To organize the unstructured mesh data structure efficiently, a non‐manifold hybrid mesh data structure is extended for polygonal cells. Numerical experiments are performed on incompressible flow over a smooth flat plate and compressible turbulent flows around a NACA 0012 airfoil using unstructured hybrid meshes. These numerical results are found to be in good agreement with experimental data and/or other numerical solutions, demonstrating the applicability of the proposed method to simulate both subsonic and transonic turbulent flows. Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical simulation of compressible turbulent flow via improved gas‐kinetic BGK scheme

In order to solve compressible turbulent flow problems, this study focuses on incorporating the Spalart–Allmaras turbulence model into gas‐kinetic BGK (Bhatnagar–Gross–Krook) scheme. The Spalart–Allmaras turbulence model is solved using finite difference discretization. The variables on the cell interface are interpolated via the van Leer limiter in the reconstruction stage. Simulation of subsonic and transonic flow over a NACA0012 airfoil has been implemented using two‐dimensional body‐fitted grids. The numerical results obtained appear in good agreement with the AGARD results, demonstrating the effectiveness and usefulness of the strategy of coupling the Spalart–Allmaras turbulence model with the BGK scheme for compressible turbulent flow simulation. Copyright © 2010 John Wiley & Sons, Ltd.     

Parallel large eddy simulation of turbulent flow around MIRA model using linear equal‐order finite element method

A parallel large eddy simulation code that adopts domain decomposition method has been developed for large‐scale computation of turbulent flows around an arbitrarily shaped body. For the temporal integration of the unsteady incompressible Navier–Stokes equation, fractional 4‐step splitting algorithm is adopted, and for the modelling of small eddies in turbulent flows, the Smagorinsky model is used. For the parallelization of the code, METIS and Message Passing Interface Libraries are used, respectively, to partition the computational domain and to communicate data between processors. To validate the parallel architecture and to estimate its performance, a three‐dimensional laminar driven cavity flow inside a cubical enclosure has been solved. To validate the turbulence calculation, the turbulent channel flows at Re_τ = 180 and 1050 are simulated and compared with previous results. Then, a backward facing step flow is solved and compared with a DNS result for overall code validation. Finally, the turbulent flow around MIRA model at Re = 2.6 × 10⁶ is simulated by using approximately 6.7 million nodes. Scalability curve obtained from this simulation shows that scalable results are obtained. The calculated drag coefficient agrees better with the experimental result than those previously obtained by using two‐equation turbulence models. Copyright © 2007 John Wiley & Sons, Ltd.     

On the performance of WENO/TENO schemes to resolve turbulence in DNS/LES of high‐speed compressible flows

High‐speed compressible turbulent flows typically contain discontinuities and have been widely modeled using Weighted Essentially Non‐Oscillatory (WENO) schemes due to their high‐order accuracy and sharp shock capturing capability. However, such schemes may damp the small scales of turbulence and result in inaccurate solutions in the context of turbulence‐resolving simulations. In this connection, the recently developed Targeted Essentially Non‐Oscillatory (TENO) schemes, including adaptive variants, may offer significant improvements. The present study aims to quantify the potential of these new schemes for a fully turbulent supersonic flow. Specifically, DNS of a compressible turbulent channel flow with M = 1.5 and Re_τ = 222 is conducted using OpenSBLI, a high‐order finite difference computational fluid dynamics framework. This flow configuration is chosen to decouple the effect of flow discontinuities and turbulence and focus on the capability of the aforementioned high‐order schemes to resolve turbulent structures. The effect of the spatial resolution in different directions and coarse grid implicit LES are also evaluated against the WALE LES model. The TENO schemes are found to exhibit significant performance improvements over the WENO schemes in terms of the accuracy of the statistics and the resolution of the three‐dimensional vortical structures. The sixth‐order adaptive TENO scheme is found to produce comparable results to those obtained with nondissipative fourth‐ and sixth‐order central schemes and reference data obtained with spectral methods. Although the most computationally expensive scheme, it is shown that this adaptive scheme can produce satisfactory results if used as an implicit LES model.     

Incompressible Roe‐like scheme for turbulent flows

In the current study, numerical investigation of incompressible turbulent flow is presented. By the artificial compressibility method, momentum and continuity equations are coupled. Considering Reynolds averaged Navier–Stokes equations, the Spalart–Allmaras turbulence model, which has accurate results in two‐dimensional problems, is used to calculate Reynolds stresses. For convective fluxes a Roe‐like scheme is proposed for the steady Reynolds averaged Navier–Stokes equations. Also, Jameson averaging method was implemented. In comparison, the proposed characteristics‐based upwind incompressible turbulent Roe‐like scheme, demonstrated very accurate results, high stability, and fast convergence. The fifth‐order Runge–Kutta scheme is used for time discretization. The local time stepping and implicit residual smoothing were applied as the convergence acceleration techniques. Suitable boundary conditions have been implemented considering flow behavior. The problem has been studied at high Reynolds numbers for cross flow around the horizontal circular cylinder and NACA0012 hydrofoil. Results were compared with those of others and a good agreement has been observed. Copyright © 2012 John Wiley & Sons, Ltd.     

The improved surface gradient method for flows simulation in variable bed topography channel using TVD‐MacCormack scheme

This paper reports four different approaches to discretize the source terms for the simulation of one‐dimensional open‐channel flows with rapidly varied bottom topography using TVD‐MacCormack scheme. Compared with other high‐resolution shock‐capturing schemes, MacCormack‐type predictor–corrector method is easy to implement and does not present any additional difficulty in dealing with the source terms. To avoid the generation of artificial numerical waves, if the bottom topography shows strong variation, special treatment of the source terms is still required to eliminate or reduce the artificial numerical error caused by adding TVD corrections to the method. The computed results demonstrated that the improved surface gradient method is more suitable for simulating open‐channel flow with highly irregular bed topography by using the surface gradient instead of the depth gradient for TVD corrections and considering the balancing of the source terms and the flux gradients. Copyright © 2003 John Wiley & Sons, Ltd.     

Calculation of three‐dimensional turbulent flow with a finite volume multigrid method

A numerical method for the efficient calculation of three‐dimensional incompressible turbulent flow in curvilinear co‐ordinates is presented. The mathematical model consists of the Reynolds averaged Navier–Stokes equations and the k–ε turbulence model. The numerical method is based on the SIMPLE pressure‐correction algorithm with finite volume discretization in curvilinear co‐ordinates. To accelerate the convergence of the solution method a full approximation scheme‐full multigrid (FAS‐FMG) method is utilized. The solution of the k–ε transport equations is embedded in the multigrid iteration. The improved convergence characteristic of the multigrid method is demonstrated by means of several calculations of three‐dimensional flow cases. Copyright © 1999 John Wiley & Sons, Ltd.     

Implementing a high‐order accurate implicit operator scheme for solving steady incompressible viscous flows using artificial compressibility method

This paper uses a fourth‐order compact finite‐difference scheme for solving steady incompressible flows. The high‐order compact method applied is an alternating direction implicit operator scheme, which has been used by Ekaterinaris for computing two‐dimensional compressible flows. Herein, this numerical scheme is efficiently implemented to solve the incompressible Navier–Stokes equations in the primitive variables formulation using the artificial compressibility method. For space discretizing the convective fluxes, fourth‐order centered spatial accuracy of the implicit operators is efficiently obtained by performing compact space differentiation in which the method uses block‐tridiagonal matrix inversions. To stabilize the numerical solution, numerical dissipation terms and/or filters are used. In this study, the high‐order compact implicit operator scheme is also extended for computing three‐dimensional incompressible flows. The accuracy and efficiency of this high‐order compact method are demonstrated for different incompressible flow problems. A sensitivity study is also conducted to evaluate the effects of grid resolution and pseudocompressibility parameter on accuracy and convergence rate of the solution. The effects of filtering and numerical dissipation on the solution are also investigated. Test cases considered herein for validating the results are incompressible flows in a 2‐D backward facing step, a 2‐D cavity and a 3‐D cavity at different flow conditions. Results obtained for these cases are in good agreement with the available numerical and experimental results. The study shows that the scheme is robust, efficient and accurate for solving incompressible flow problems. Copyright © 2010 John Wiley & Sons, Ltd.     

数值耗散对压气机流动分离涡模拟的影响研究

分离涡模拟DES是压气机流动模拟中常用的高保真湍流模式。为了使DES准确解析湍流,数值耗散必须限制在合理范围内。然而,当前的压气机流动DES类研究工作中仍然普遍采用高耗散的迎风格式。本文首先基于DES类方法计算的各向同性衰减湍流结果,定量比较了多种不同数值格式的耗散,证实了高耗散迎风格式严重低估中高波数湍流能量。高阶重构格式可以一定程度上改善该问题,但能量耗散仍然过高。本文在高阶重构的基础上,进一步引入自适应耗散函数修改Riemann求解器,构造了自适应耗散格式。该格式在全波数范围都能准确地预测湍流能谱。将该格式配合DES类方法模拟跨声速离心压气机流动,其预测的压比相比于三阶迎风格式,更加接近实验结果。此外,自适应耗散格式显著提高了中小尺度流动结构的分辨率。分析表明,在使用DES类方法模拟压气机流动时,有必要采用数值耗散较低的离散格式,以准确预测压气机总体性能和流动结构。本文构造的自适应耗散格式是一种良好选择。     

An immersed boundary/wall modeling method for RANS simulation of compressible turbulent flows

In this paper, an immersed boundary (IB) method is developed to simulate compressible turbulent flows governed by the Reynolds‐averaged Navier‐Stokes equations. The flow variables at the IB nodes (interior nodes in the immediate vicinity of the solid wall) are evaluated via linear interpolation in the normal direction to close the discrete form of the governing equations. An adaptive wall function and a 2‐layer wall model are introduced to reduce the near‐wall mesh density required by the high resolution of the turbulent boundary layers. The wall shear stress modified by the wall modeling technique and the no‐penetration condition are enforced to evaluate the velocity at an IB node. The pressure and temperature at an IB node are obtained via the local simplified momentum equation and the Crocco‐Busemann relation, respectively. The SST k ? ω and S‐A turbulence models are adopted in the framework of the present IB approach. For the Shear‐Stress Transport (SST) k ? ω model, analytical solutions in near‐wall region are utilized to enforce the boundary conditions of the turbulence equations and evaluate the turbulence variables at an IB node. For the S‐A model, the turbulence variable at an IB node is calculated by using the near‐wall profile of the eddy viscosity. In order to validate the present IB approach, numerical experiments for compressible turbulent flows over stationary and moving bodies have been performed. The predictions show good agreements with the referenced experimental data and numerical results.     

A high‐order finite difference method for numerical simulations of supersonic turbulent flows

This paper describes a new class of three‐dimensional finite difference schemes for high‐speed turbulent flows in complex geometries based on the high‐order monotonicity‐preserving (MP) method. Simulations conducted for various 1D, 2D, and 3D problems indicate that the new high‐order MP schemes can preserve sharp changes in the flow variables without spurious oscillations and are able to capture the turbulence at the smallest computed scales. Our results also indicate that the MP method has less numerical dissipation and faster grid convergence than the weighted essentially non‐oscillatory method. However, both of these methods are computationally more demanding than the COMP method and are only used for the inviscid fluxes. To reduce the computational cost for reacting flows, the scalar equations are solved by the COMP method, which is shown to yield similar results to those obtained by the MP in supersonic turbulent flows with strong shock waves. Copyright © 2011 John Wiley & Sons, Ltd.