Bathymetry reconstruction based on the zero-inertia shallow water approximation

The knowledge of the channel bed topography is paramount in modeling the hydrodynamics of open channel flows. Indeed, flow models based on the Shallow Water Approximation require prior information on the channel bed topography to accurately capture the flow features in natural rivers, estuaries, and flood plains. We present here a numerical technique for reconstructing the channel bed topography from given free surface elevation data for steep open channel flows for which the zero-inertia shallow water approximation holds. In this context, the shallow water equations are modified by neglecting inertia terms while retaining the effects of the bed slope and friction terms. We show in this work that by algebraic manipulation, we can recast the governing equations into a single first-order partial differential equation which describes the inverse problem which consists in finding the bed topography from known free surface elevation data. Interestingly, the analysis shows that the inverse problem does not require the knowledge of the bed roughness. The forward problem is solved using MacCormack’s explicit numerical scheme by considering unsteady modified shallow water equations. However, the inverse problem is solved using the method of characteristics. The results of the inverse and the forward problem are successfully tested against each other on two different test cases.     

Explicit finite volume non‐oscillatory schemes for 2D transient free‐surface flows

A class of high‐resolution non‐oscillatory shock‐capturing Roe, TVD and ENO explicit schemes in finite volume approach are presented for the computation of 2D unsteady rapidly varied open channel flows. In order to apply these schemes to simulate the hydraulic phenomena in field, the Strang‐type operator splitting technique is adopted to treat the flow with bottom slope and friction terms. Verifications of the proposed schemes are made by comparison with analytical solutions or experimental data, and very good agreements are obtained. To illustrate the efficiency and stability of the present algorithms, four typical problems of rapidly varied flows are solved and the results of different schemes are compared. It is demonstrated that the proposed method is accurate, robust and highly stable even in the flows with very strong discontinuites, which need no tuning of any adjustable parameter, such as artificial viscosity coefficient, as other methods do, and is a reliable mathematical modeling for 2D practical hydraulic engineering applications. Copyright © 1999 John Wiley & Sons, Ltd.     

A numerical method for simulating discontinuous shallow flow over an infiltrating surface

A numerical method based on the MacCormack finite difference scheme is presented. The method was developed for simulating two‐dimensional overland flow with spatially variable infiltration and microtopography using the hydrodynamic flow equations. The basic MacCormack scheme is enhanced by using the method of fractional steps to simplify application; treating the friction slope, a stiff source term, point‐implicitly, plus, for numerical oscillation control and stability, upwinding the convective acceleration term. A higher‐order smoothing operator is added to aid oscillation control when simulating flow over highly variable surfaces. Infiltration is simulated with the Green–Ampt model coupled to the surface water component in a manner that allows dynamic interaction. The developed method will also be useful for simulating irrigation, tidal flat and wetland circulation, and floods. Copyright © 2000 John Wiley & Sons, Ltd.     

Absorbing boundary technique for open channel flows

An absorbing boundary condition is formulated and applied to the one‐dimensional open channel flow equations in conjunction with an explicit MacCormack scheme. The physical flow domain has been truncated by introducing an artificial pseudo‐boundary. By using an appropriate boundary condition on a truncated domain, it is shown that, for flow containing shocks, the solution can be accelerated to its stationary profile with no loss of accuracy. Copyright © 2000 John Wiley & Sons, Ltd.     

Exactly well‐balanced positivity preserving nonstaggered central scheme for open‐channel flows

In this paper, we construct and study an exactly well‐balanced positivity‐preserving nonstaggered central scheme for shallow water flows in open channels with irregular geometry and nonflat bottom topography. We introduce a novel discretization of the source term based on hydrostatic reconstruction to obtain the exactly well‐balanced property for the still water steady‐state solution even in the presence of wetting and drying transitions. The positivity‐preserving property of the cross‐sectional wet area is obtained by using a modified “draining" time‐step technique. The current scheme is also Riemann‐solver‐free. Several classical problems of open‐channel flows are used to test these properties. Numerical results confirm that the current scheme is robust, exactly well‐balanced and positivity‐preserving.     

A well‐balanced upstream flux‐splitting finite‐volume scheme for shallow‐water flow simulations with irregular bed topography

This study extends the upstream flux‐splitting finite‐volume (UFF) scheme to shallow water equations with source terms. Coupling the hydrostatic reconstruction method (HRM) with the UFF scheme achieves a resultant numerical scheme that adequately balances flux gradients and source terms. The proposed scheme is validated in three benchmark problems and applied to flood flows in the natural/irregular river with bridge pier obstructions. The results of the simulations are in satisfactory agreement with the available analytical solutions, experimental data and field measurements. Comparisons of the present results with those obtained by the surface gradient method (SGM) demonstrate the superior stability and higher accuracy of the HRM. The stability test results also show that the HRM requires less CPU time (up to 60%) than the SGM. The proposed well‐balanced UFF scheme is accurate, stable and efficient to solve flow problems involving irregular bed topography. Copyright © 2009 John Wiley & Sons, Ltd.     

A Godunov method for the computation of erosional shallow water transients

A Godunov method is proposed for the computation of open‐channel flows in conditions of rapid bed erosion and intense sediment transport. Generalized shallow water equations govern the evolution of three distinct interfaces: the water free‐surface, the boundary between pure water and a sediment transport layer, and the morphodynamic bottom profile. Based on the HLL scheme of Harten, Lax and Van Leer (1983), a finite volume numerical solver is constructed, then extended to second‐order accuracy using Strang splitting and MUSCL extrapolation. Lateralisation of the momentum flux is adopted to handle the non‐conservative product associated with bottom slope. Computational results for erosional dam‐break waves are compared with experimental measurements and semi‐analytical Riemann solutions. Copyright © 2003 John Wiley & Sons, Ltd.     

An unstructured finite volume model for dam‐break floods with wet/dry fronts over complex topography

A robust, well‐balanced, unstructured, Godunov‐type finite volume model has been developed in order to simulate two‐dimensional dam‐break floods over complex topography with wetting and drying. The model is based on the nonlinear shallow water equations in hyperbolic conservation form. The inviscid fluxes are calculated using the HLLC approximate Riemann solver and a second‐order spatial accuracy is achieved by implementing the MUSCL reconstruction technique. To prevent numerical oscillations near shocks, slope‐limiting techniques are used for controlling the total variation of the reconstructed field. The model utilizes an explicit two‐stage Runge–Kutta method for time stepping, whereas implicit treatments for friction source terms. The novelties of the model include the flux correction terms and the water depth reconstruction method both for partially and fully submerged cells, and the wet/dry front treatments. The proposed flux correction terms combined with the water depth reconstruction method are necessary to balance the bed slope terms and flux gradient in the hydrostatical steady flow condition. Especially, this well‐balanced property is also preserved in partially submerged cells. It is found that the developed wet/dry front treatments and implicit scheme for friction source terms are stable. The model is tested against benchmark problems, laboratory experimental data, and realistic application related to dam‐break flood wave propagation over arbitrary topography. Numerical results show that the model performs satisfactorily with respect to its effectiveness and robustness and thus has bright application prospects. Copyright © 2010 John Wiley & Sons, Ltd.     

An immersed boundary method wall model for high‐Reynolds‐number channel flow over complex topography

High‐Reynolds‐number channel flows regularly encounter topographies composed of multiple length scales and that protrude into the boundary layer. Physically, the presence of immersed obstacles leads to increased velocity gradients, turbulence production, and manifestation of wakes. Considerable challenges are associated with numerically describing the presence of obstacles in channel flows. Common approaches include generation of a computational mesh that is uniquely designed for the flow and obstacle, the immersed boundary method, and terrain‐following coordinates. There are challenges and limitations associated with each of these techniques. Specification of boundary conditions representing the perimeter of solid obstacles is a primary challenge of the immersed boundary method. In this document, a simplistic canopy stress‐like wall model is used to impose boundary conditions. The model isolates aerodynamically relevant local frontal areas through evaluation of the gradient of the topographic height field. The gradient of the height field describes both the surface‐normal direction and the frontal area, making it ideal for detecting areas on which the flow impinges. The model is tested in numerical simulations of turbulent half‐channel flow over topographies with different obstacles affixed–right prisms, rectangular prisms, ellipsoidal mounds, and sinusoids. In all cases, the performance is strong relative to datasets presented in the literature. Results are finally presented for numerical simulation of flow over complex synthetic fractal‐like topography and a synthetic city. These results show interesting trends in how the turbulent multiscale flow field responds to multiscale topography. Copyright © 2012 John Wiley & Sons, Ltd.     

Reynolds stress modelling of rectangular open‐channel flow

A Reynolds stress model for the numerical simulation of uniform 3D turbulent open‐channel flows is described. The finite volume method is used for the numerical solution of the flow equations and transport equations of the Reynolds stress components. The overall solution strategy is the SIMPLER algorithm, and the power‐law scheme is used to discretize the convection and diffusion terms in the governing equations. The developed model is applied to a flow at a Reynolds number of 77000 in a rectangular channel with a width to depth ratio of 2. The simulated mean flow and turbulence structures are compared with measured and computed data from the literature. The computed flow vectors in the plane normal to the streamwise direction show a small vortex, called inner secondary currents, located at the juncture of the sidewall and the free surface as well as the free surface and bottom vortices. This small vortex causes a significant increase in the wall shear stress in the vicinity of the free surface. A budget analysis of the streamwise vorticity is carried out. It is found that both production terms by anisotropy of Reynolds normal stress and by Reynolds shear stress contribute to the generation of secondary currents. Copyright © 2006 John Wiley & Sons, Ltd.     

Hybrid finite‐volume finite‐difference scheme for the solution of Boussinesq equations

A hybrid scheme composed of finite‐volume and finite‐difference methods is introduced for the solution of the Boussinesq equations. While the finite‐volume method with a Riemann solver is applied to the conservative part of the equations, the higher‐order Boussinesq terms are discretized using the finite‐difference scheme. Fourth‐order accuracy in space for the finite‐volume solution is achieved using the MUSCL‐TVD scheme. Within this, four limiters have been tested, of which van‐Leer limiter is found to be the most suitable. The Adams–Basforth third‐order predictor and Adams–Moulton fourth‐order corrector methods are used to obtain fourth‐order accuracy in time. A recently introduced surface gradient technique is employed for the treatment of the bottom slope. A new model ‘HYWAVE’, based on this hybrid solution, has been applied to a number of wave propagation examples, most of which are taken from previous studies. Examples include sinusoidal waves and bi‐chromatic wave propagation in deep water, sinusoidal wave propagation in shallow water and sinusoidal wave propagation from deep to shallow water demonstrating the linear shoaling properties of the model. Finally, sinusoidal wave propagation over a bar is simulated. The results are in good agreement with the theoretical expectations and published experimental results. Copyright © 2005 John Wiley & Sons, Ltd.     

Development of the generalized MacCormack scheme and its extension to low Mach number flows

The low Mach number performance of the MacCormack scheme is examined. The inherent dissipation in the scheme is found to suffer from the degradation in accuracy observed with traditional, density‐based methods for compressible flows. Two specific modifications are proposed, leading to the formation of the generalized MacCormack scheme within a dual‐time framework (called GMC‐PC). The first modification involves reformulating the flux by splitting it into particle convection and acoustic parts, with the former terms treated using the traditional MacCormack discretization and the latter terms augmented by the addition of a pressure‐based artificial dissipation. The second modification involves a reformulation of the traditional nonlinear fix introduced by MacCormack in 1971, which is found to be necessary to suppress pressure oscillations at low Mach numbers. The new scheme is demonstrated to have superior performance, independent of Mach number, compared with standard MacCormack implementations using several canonical test problems. Copyright © 2017 John Wiley & Sons, Ltd.     

Simulation of rapidly varying flow using an efficient TVD–MacCormack scheme

An efficient numerical scheme is outlined for solving the SWEs (shallow water equations) in environmental flow; this scheme includes the addition of a five‐point symmetric total variation diminishing (TVD) term to the corrector step of the standard MacCormack scheme. The paper shows that the discretization of the conservative and non‐conservative forms of the SWEs leads to the same finite difference scheme when the source term is discretized in a certain way. The non‐conservative form is used in the solution outlined herein, since this formulation is simpler and more efficient. The time step is determined adaptively, based on the maximum instantaneous Courant number across the domain. The bed friction is included either explicitly or implicitly in the computational algorithm according to the local water depth. The wetting and drying process is simulated in a manner which complements the use of operator‐splitting and two‐stage numerical schemes. The numerical model was then applied to a hypothetical dam‐break scenario, an experimental dam‐break case and an extreme flooding event over the Toce River valley physical model. The predicted results are free of spurious oscillations for both sub‐ and super‐critical flows, and the predictions compare favourably with the experimental measurements. Copyright © 2006 John Wiley & Sons, Ltd.     

An unstructured finite‐volume method for coupled models of suspended sediment and bed load transport in shallow‐water flows

The aim of this work is to develop a well‐balanced finite‐volume method for the accurate numerical solution of the equations governing suspended sediment and bed load transport in two‐dimensional shallow‐water flows. The modelling system consists of three coupled model components: (i) the shallow‐water equations for the hydrodynamical model; (ii) a transport equation for the dispersion of suspended sediments; and (iii) an Exner equation for the morphodynamics. These coupled models form a hyperbolic system of conservation laws with source terms. The proposed finite‐volume method consists of a predictor stage for the discretization of gradient terms and a corrector stage for the treatment of source terms. The gradient fluxes are discretized using a modified Roe's scheme using the sign of the Jacobian matrix in the coupled system. A well‐balanced discretization is used for the treatment of source terms. In this paper, we also employ an adaptive procedure in the finite‐volume method by monitoring the concentration of suspended sediments in the computational domain during its transport process. The method uses unstructured meshes and incorporates upwinded numerical fluxes and slope limiters to provide sharp resolution of steep sediment concentrations and bed load gradients that may form in the approximate solutions. Details are given on the implementation of the method, and numerical results are presented for two idealized test cases, which demonstrate the accuracy and robustness of the method and its applicability in predicting dam‐break flows over erodible sediment beds. The method is also applied to a sediment transport problem in the Nador lagoon.Copyright © 2013 John Wiley & Sons, Ltd.     

A robust 2D shallow water model for solving flow over complex topography using homogenous flux method

A robust Godunov‐type numerical scheme solver is proposed for solving 2D SWEs and is applied to simulate flow over complex topography with wetting and drying. In reality, the topography is usually complex and irregular; therefore, to avoid the numerical errors generated by such features, a Homogenous Flux Method is used to handle the bed slope term in the SWEs. The method treats the bed slope term as a flux to be incorporated into the flux gradient and so maintains the balance between the two in a Godunov‐type shock‐capturing scheme. The main advantages of the method are: first, it is simple and easy to implement; second, numerical experiments demonstrate that it can handle discontinuous or vertical bed topography without any special treatment and third, it is applicable to both steady and unsteady flows. It is demonstrated how the approach set out here can be applied to the nonlinear hyperbolic system of the SWEs. The two‐dimensional hyperbolic system is then solved by use of a second‐order total‐variation‐diminishing version of the weighted average flux method in conjunction with a Harten‐Lax‐van Leer‐Contract approximate Riemann solver incorporating the new flux gradient term. Several benchmark tests are presented to validate the model and the approach is verified against experimental measurements from the European Union Concerted Action on Dam Break Modelling project. These show very good agreement. Finally, the method is applied to a volcano‐induced outburst flood over an initially dry channel with complex irregular topography to demonstrate the technique's capability in simulating a real flood. Copyright © 2013 John Wiley & Sons, Ltd.     

A numerical method for the determination of weakly non‐hydrostatic non‐linear free surface wave propagation

A numerical method is described that may be used to determine the propagation characteristics of weakly non‐hydrostatic non‐linear free surface waves over a general, bottom topography. In shallow water of constant undisturbed depth, such waves are equivalent to the familiar cnoidal waves characterized by sharp crests and relatively flat troughs. For a certain range of parameters, these propagate without change of form by virtue of the weakly non‐hydrostatic balance in the vertical momentum equation. Effectively, this counters the tendency for the non‐linearity in a purely hydrostatic theory to lead to a continuously deforming surface wave profile. The realistic representation furnished by cnoidal wave theory of free surface waves in the shallow near‐shore zone has led to its utilization in evaluating their propagation characteristics. Nonetheless, the classic analytical theory is inapplicable to the case of wave propagation over a sloping beach or off‐shore sand bar topography. Under these conditions, a local change in form of the surface wave profile is anticipated before the waves break and knowing this is required in order to evaluate fully the propagation process. The efficacy of the numerical method is first demonstrated by comparing the solution for water of constant depth with the evaluation of the analytical solution expressed in terms of the Jacobian elliptic function cn. The general method described in the paper is then illustrated by experiments to determine the change in profile of weakly non‐hydrostatic non‐linear surface waves propagating over bed forms representative of those found in shallow coastal seas. Copyright © 2001 John Wiley & Sons, Ltd.     

Efficient high‐resolution relaxation schemes for hyperbolic systems of conservation laws

In this work, we present a total variation diminishing (TVD) scheme in the zero relaxation limit for nonlinear hyperbolic conservation law using flux limiters within the framework of a relaxation system that converts a nonlinear conservation law into a system of linear convection equations with nonlinear source terms. We construct a numerical flux for space discretization of the obtained relaxation system and modify the definition of the smoothness parameter depending on the direction of the flow so that the scheme obeys the physical property of hyperbolicity. The advantages of the proposed scheme are that it can give second‐order accuracy everywhere without introducing oscillations for 1‐D problems (at least with) smooth initial condition. Also, the proposed scheme is more efficient as it works for any non‐zero constant value of the flux limiter ? ? [0, 1], where other TVD schemes fail. The resulting scheme is shown to be TVD in the zero relaxation limit for 1‐D scalar equations. Bound for the limiter function is obtained. Numerical results support the theoretical results. Copyright © 2007 John Wiley & Sons, Ltd.     

Solution of the shallow‐water equations using an adaptive moving mesh method

This paper extends an adaptive moving mesh method to multi‐dimensional shallow water equations (SWE) with source terms. The algorithm is composed of two independent parts: the SWEs evolution and the mesh redistribution. The first part is a high‐resolution kinetic flux‐vector splitting (KFVS) method combined with the surface gradient method for initial data reconstruction, and the second part is based on an iteration procedure. In each iteration, meshes are first redistributed by a variational principle and then the underlying numerical solutions are updated by a conservative‐interpolation formula on the resulting new mesh. Several test problems in one‐ and two‐dimensions with a general geometry are computed using the proposed moving mesh algorithm. The computations demonstrate that the algorithm is efficient for solving problems with bore waves and their interactions. The solutions with higher resolution can be obtained by using a KFVS scheme for the SWEs with a much smaller number of grid points than the uniform mesh approach, although we do not treat technically the bed slope source terms in order to balance the source terms and flux gradients. Copyright © 2004 John Wiley & Sons, Ltd.     

RCM‐TVD hybrid scheme for hyperbolic conservation laws

We describe a hybrid method for the solution of hyperbolic conservation laws. A third‐order total variation diminishing (TVD) finite difference scheme is conjugated with a random choice method (RCM) in a grid‐based adaptive way. An efficient multi‐resolution technique is used to detect the high gradient regions of the numerical solution in order to capture the shock with RCM while the smooth regions are computed with the more efficient TVD scheme. The hybrid scheme captures correctly the discontinuities of the solution and saves CPU time. Numerical experiments with one‐ and two‐dimensional problems are presented. Copyright © 2007 John Wiley & Sons, Ltd.     

A robust and well‐balanced scheme for the 2D Saint‐Venant system on unstructured meshes with friction source term

In the following lines, we propose a numerical scheme for the shallow‐water system supplemented by topography and friction source terms, in a 2D unstructured context. This work proposes an improved version of the well‐balanced and robust numerical model recently introduced by Duran et al. (J. Comp. Phys., 235 , 565–586, 2013) for the pre‐balanced shallow‐water equations, accounting for varying topography. The present work aims at relaxing the robustness condition and includes a friction term. To this purpose, the scheme is modified using a recent method, entirely based on a modified Riemann solver. This approach preserves the robustness and well‐balanced properties of the original scheme and prevents unstable computations in the presence of low water depths. A series of numerical experiments are devoted to highlighting the performances of the resulting scheme. Simulations involving dry areas, complex geometry and topography are proposed to validate the stability of the numerical model in the neighbourhood of wet/dry transitions. Copyright © 2015 John Wiley & Sons, Ltd.