衍生化-液液萃取气相色谱法测定环境水体中苦味酸

建立衍生化-液液萃取气相色谱法测定环境水体中的苦味酸。环境水体中的苦味酸经次氯酸钠氯化衍生后,用正己烷提取后进行气相色谱分析。对萃取溶剂、衍生化反应温度和时间、衍生试剂(次氯酸钠)的加入量、色谱柱的选择以及色谱分析条件进行了优化,采取正己烷作为萃取试剂,加入次氯酸钠溶液2.0 mL,选择衍生化反应温度为35℃,反应时间为50 min,DB-5细管柱(30 m×0.32 mm,0.25μm)作为分离柱,当取样体积为10 mL时,方法检出限为0.2μg/L。用该方法对实验用水做了高、中、低质量浓度水平的加标回收试验,回收率为85.5%~105.6%,相对标准偏差为2.93%~4.49%(n=6)。     

磁性分散固相萃取气相色谱法测定地表水中硝基苯类

建立了一种磁性分散固相萃取气相色谱法快速测定地表水中硝基苯类化合物的分析方法,并优化了磁性萃取材料的用量、萃取的时间、解吸溶剂的选择、盐效应等试验影响因素.试验结果表明,硝基苯类化合物的检出限为0.000 4~0.007 mg/L,回收率为84.0%~97.6%,相对标准偏差为3.4%~5.3%.方法具有适用性广、溶剂用量少和操作简便等特点,能很好的测定地表水中的硝基苯类化合物.     

固相膜萃取-超声洗脱-原位衍生法分析水中不同极性农药残留

建立了水中极性除草剂和非极性杀虫剂固相膜萃取-超声洗脱-原位衍生-气相色谱质谱方法。在样pH≈3时,采用C8固相萃取膜,10 min可完成1000 mL水中两类化合物的萃取;将膜片置于反应瓶中,加入2 mL丙酮溶剂和衍生试剂,对杀虫剂进行超声洗脱、对除草剂进行洗脱衍生。其洗脱、衍生时间为30 min。以HP-5MS(30 m×0.25 mm×0.25μm)为分析柱,采用负化学源技术在10 min内完成两类物质的检测。由于衍生试剂与酸性除草剂是特定的官能团之间的反应,并且衍生时间较短,因此杀虫剂的回收率不受影响。方法实现了不同极性有机物的同时萃取、同时检测。在10~250μg/L线性范围内各组分线性关系良好,相关系数R2>0.9978,检出限<1.0μg/L。不同基质、不同浓度的加标回收率在88%~107%之间;相对标准偏差在3.6%~9.7%之间。     

微滴液相微萃取技术用于气相色谱-质谱法分析药品中的酞酸酯和对羟基苯甲酸酯

用微滴液相微萃取(SDME)与气相色谱-离子阱质谱联用测定药品中的酞酸酯和对羟基苯甲酸酯。考察了萃取溶剂的种类及用量、微液滴在样品溶液中的深度、萃取时间及搅拌子的搅拌速度对微滴液相微萃取效果的影响。优化的萃取条件:萃取溶剂为1.5 μL甲苯,微液滴在样品溶液中的深度为0.8 cm,搅拌子的搅拌速度为1000 r/min,萃取时间为20 min。该方法的线性范围为0.032~80 mg/L,检出限为0.6 μg/L~1.28 mg/L,加标回收率为95.85%~148.85%,相对标准偏差为3.9%~14.9%。     

茶叶中三氯杀螨醇残留量的微波萃取-固相微萃取-气相色谱快速检测方法

建立了微波辅助萃取-固相微萃取-气相色谱/电子捕获检测法快速测定茶叶中三氯杀螨醇的方法。采用自制的PDMS萃取头,优化了萃取溶剂的种类,微波辐射时间和微波功率等微波辅助萃取条件;研究了SPME萃取时间、搅拌速度、离子强度、解吸温度和解吸时间对萃取效率的影响。方法对三氯杀螨醇的检出限为0.048 ng/mL,线性范围为0.2~200 ng/mL。在优化的实验条件下,对乌龙茶进行添加回收试验,平均回收率为61.3%~72.8%,相对标准偏差为8.0%~16.3%。本方法适合于茶叶中痕量三氯杀螨醇快速检测。     

单滴微萃取-气相色谱-质谱联用测定水中的硝基咪唑类药物

建立了单滴液相微萃取(SDME)与气相色谱-质谱(GC-MS)联用技术快速检测水中的硝基咪唑类药物,对影响萃取的因素(溶剂的种类及用量、萃取时间、萃取温度及搅拌子的搅拌速度)进行优化。优化的萃取条件为:溶剂为2.5μL正辛醇,温度为50℃,搅拌速度为600 r/min,时间为20 min。萃取后,微液滴转移至衍生化试管,于70℃水浴中衍生45 min,进样分析。该方法在水中的线性范围为0.5~400μg/L,线性相关系数良好(r0.998),检测限为0.16~0.57μg/L。加标自来水和湖水中的相对平均回收率为80.9%~103.6%,相对标准偏差为1.7%~9.0%。     

同时加速溶剂萃取/气相色谱-质谱法测定植物中13种有机磷酸酯

建立了同时加速溶剂萃取和净化、气相色谱-离子阱二级质谱检测植物中13种有机磷酸酯阻燃剂/增塑剂的分析方法。样品放入以硅胶和活性炭作为在线净化填料的萃取池中,在萃取溶剂为正己烷-丙酮(1∶1,体积比)、萃取温度100℃、静态萃取时间10 min、循环2次的条件下进行加速溶剂萃取,萃取液浓缩后经DB-5MS(30 m×0.25 mm×0.25μm)气相色谱柱分离,选择反应监测模式(SRM)检测,以保留时间和特征离子对定性,内标法定量。结果表明,该方法具有较好的准确度和精密度,13种有机磷酸酯在3个加标水平下的回收率为76.9%~113.0%,相对标准偏差为2.0%~14.6%,方法检出限为0.79~2.27 ng/g,方法定量下限为2.65~7.59 ng/g。该方法简便、快速、准确,可用于植物中13种有机磷酸酯的测定。     

电场促进下的单滴微萃取-气相色谱法测定尿中6种苯丙胺类兴奋剂

建立了电场促进下的单滴微萃取结合气相色谱技术测定尿中6种苯丙胺类兴奋剂（ATSs）的分析方法。通过对影响萃取效率因素的优化,确定了最佳萃取条件：二氯甲烷萃取溶剂2 μL、萃取时间3 min、样品溶液pH 7和电压-2.5 V。采用HP-5毛细管色谱柱（30 m×0.32 mm×0.25 μm）进行分离,用氢火焰离子化检测器进行检测。6种ATSs在20~1000 μg/L范围内呈良好的线性关系,相关系数（r）为0.989~0.997,检出限（S/N=3）为3.2~7.6 μg/L;对尿样进行加标回收试验（50、100和500 μg/L）,6种ATSs的回收率为91.6%~111.2%,相对标准偏差为2.9%~6.2%（n=3）。该法具有快速简便、灵敏度高、重复性好、线性范围宽、对环境友好的特点,可用于尿样中6种ATSs的分析测定。     

加速溶剂萃取-在线净化-气相色谱-质谱法测定土壤中多氯烃类化合物

以土壤中六氯环戊二烯、六氯丁二烯、六氯乙烷为研究对象,采用加速溶剂萃取法进行在线净化和萃取,用气相色谱-质谱法测定。将土壤样品10g与石英砂20g混合均匀后,加入到装有氟罗里硅土粉1g和石墨炭黑粉0.2g的萃取池中,以二氯甲烷-丙酮(4+1)混合液为萃取剂进行萃取。考察了萃取温度、萃取剂、分散剂和土壤pH、TOC等因素的影响,分析了在线净化和离线净化的差异以及复合净化的优势。应用该方法对3个不同土壤样品进行测定,回收率在72.3%~89.0%之间,相对标准偏差(n=7)为7.4%~13%。     

分散固相萃取-分散液液微萃取/高效液相色谱法测定西瓜中氟唑菌酰羟胺残留

采用分散固相萃取和分散液液微萃取联用的方法,建立了高效液相色谱快速检测西瓜中氟唑菌酰羟胺残留的分析方法。使用乙腈和水混合溶液作为萃取溶剂,经N-丙基-乙二胺硅烷(PSA)固相萃取吸附剂净化提取液,分散液液微萃取将目标物富集到1,1,2,2-四氯乙烷溶剂中,采用高效液相色谱进行分析。考察了萃取溶剂的种类与体积、分散剂体积及盐浓度等因素对分散液液微萃取萃取效率的影响。结果表明:分析物的质量浓度在0.01~5 mg/L范围内与峰面积的线性关系良好,相关系数(r)为0.999 9,定量下限(S/N=10)为0.01 mg/kg。加标水平为0.01、0.1、1 mg/kg时,平均回收率为89.2%~94.5%,相对标准偏差(n=5)为3.0%~8.7%。该方法简单、高效、灵敏度高,适用于西瓜中氟唑菌酰羟胺的残留检测。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.