聚[N-(4-二甲氨联苯基)马来酰亚胺]单体的合成及其聚合

N-取代的马来酰亚胺是缺电子的负性单体[1],它很容易进行自由基聚合或共聚合[2,3],特别是能够与负性单体如丙烯腈共聚合[4].如果在缺电子的N-取代马来酰亚胺单体中引入给电子生色基团,即给电子生色基团与受电子基团于一体,能够表现出较好的光化学性能[5].本文中报道了聚[N-(4-二甲氨联苯基)马来酰亚胺]及其单体的合成,聚合物的光化学性能将在另文报道.     

苯基马来酰亚胺系列单体的合成、结构与性能

本文以马来酸酐、苯胺为原料,三乙胺为脱水催化剂合成了７种含苯取代基的马来酰亚胺单体（ＰｈＭＩ）,采用元素分析ＥＡ、核磁共振ＮＭＲ、傅立叶红外ＦＴ－ＩＲ等仪器对产物及中间产物的结构进行表征,并对单体熔、溶性能和聚合反应性进行考察,结果表明,合成产物与预期产品结构一致;７种单体中,（邻或间－甲）苯基马来酰亚胺的熔、溶性能最好;除邻－甲苯基马来酰亚胺较难聚合外,其余单体具有良好的聚合性能。     

N-甘氨酸基马来酰亚胺的合成研究

由于马来酸酐易发生水解反应，不能采用悬浮法和乳液法共聚而很大程度上限制了其应用。因此，合成既能克服马来酸酐缺点，又能保持其优点的可聚合单体—N-取代马来酰亚胺。N-对羧基苯基马来酰亚胺可广泛用作染料、药物以及功能高分子化合物中间体；五十岚喜雄等报道了N-取代苯马来酰亚胺类化合物具有抗微生物活性作用；环已基马来酰亚胺用于PMMA共聚改性，查显著提高PMMA的力学性能和耐热性，同时对PMMA耐候性和透光性几乎没有影响；艾娇艳H0等制备了含不对称碳原子的N-（异丙酸基）-马来酰亚胺。     

镧配位催化N-十八烷基马来酰亚胺均聚合

N-取代马来酰亚胺聚合物中的酰亚胺环为平面五元环结构,阻碍了酰亚胺单元绕聚合物主链的旋转,限制了聚合物主链的运动,使聚合物的热性能和化学稳定性得到了很大的提高．近些年来,有关N-取代马来酰亚胺均聚合研究的报道已经有很多,但大多采用自由基聚合方法和负离子聚合方法,采用配位催化聚合方法很少．     

N-(对甲苯基)马来酰亚胺的自由自聚合与光敏诱导聚合及共聚合

N-烷基与N-芳基马来酰亚胺,是属于1,2-二取代乙烯结构的单体,文献[1—3]报道这类单体能进行自由基聚合与共聚合。但对于N-(对甲苯基)马来酰亚胺(PMPMI)的自由基聚合与共聚合中,溶剂对聚合物分子量的影响尚未有详细报道。至于N-烷基与N-芳基马来酰亚胺分别和丙烯酸甲酯(MA)、甲基丙烯酸甲酯(MMA)的共聚合也有一些报道,由竞聚率的测定,计算出N-芳基马来酰亚胶的e值是2.12—2.29和1.35—1.75。表明N-芳基马来酰亚胺是一缺电子的单体,即负性单体。我们研究室曾报道N,N-二甲基-对甲苯胺(DMT)和其它芳胺能光诱导引发负性单体丙烯腈聚合。PMP-     

氯乙烯/N-取代马来酰亚胺共聚竞聚率及共聚物组成

研究了氯乙烯(VC)与多种N-取代马来酰亚胺的溶液共聚合,求得各对单体的竞聚率.结果表明,各种马来酰亚胺的竞聚率都远高于VC的竞聚率,即N-取代马来酰亚胺单体的活性均比VC单体活性高.计算得到N-取代马来酰亚胺Q和e值.由于苯环的共轭效应,N-苯基及N-取代苯基马来酰亚胺具有较大的Q值.各对单体的e值差别较大,表明有形成交替共聚物的倾向.此外,还考察了聚合过程中共聚物组成的变化,用递推法预测了这类体系共聚物瞬时和累积组成随转化率的变化.     

苯乙烯与N-取代马来酰亚胺的可逆加成-断裂链转移交替共聚合

研究了二硫代苯甲酸酯存在下偶氮二异丁腈引发苯乙烯(St)、St与N-对羟基苯基马来酰亚胺(HPM)、St与N-对(2-氯/溴丙酰氧基)苯基马来酰亚胺(CPPM/BPPM)的可逆加成-断裂链转移(RAFT)均/共聚,聚合物的结构由紫外-可见光(UV-Vis)与凝胶渗透色谱(GPC)表征.结果表明,St的RAFT均聚以及St与N-取代马来酰亚胺的RAFT共聚均呈现活性聚合特征,分子量随着转化率上升而增加,且分子量分布较窄.对于St的RAFT均聚,由于双基终止,聚苯乙烯(PSt)链中"戴帽效率"随着转化率上升逐渐下降.对于St与N-取代马来酰亚胺的RAFT共聚合,电荷转移复合物的形成显著地提高了共聚反应速度,并促进交替结构的形成.随后进行了以P(St-alt-BPPM)引发St的原子转移自由基聚合以制备梳型PSt,结果表明在强极性溶剂中进行的聚合过程失去可控性,所得产物分子量极宽,而在本体聚合中所得聚合物分子量相对较窄,有一定的可控性.     

N-取代马来酰亚胺光学活性聚合物研究进展

N-取代马来酰亚胺由于刚性内酰亚胺五元环的存在,在聚合时一般按反式加成进行,得到苏式双全同和苏式双间同两种构型的聚合物.其中苏式双间同结构由于具有等量的(R,R)和(S,S)结构而不产生光学活性,而苏式双全同结构中含有过量的(R,R)或(S,S)结构时聚合物呈现光学活性.而且,高度连续的(R,R)或(S,S)结构能使主链形成螺旋构象.N-取代马来酰亚胺单体上不同的取代基、不同的聚合方法以及聚合时选用的不同配体都对得到的聚合物主链中苏式双全同构象的量有显著影响.本文综述了各种N-取代马来酰亚胺光学活性聚合物的研究进展.     

乙烯基单体/N-取代马来酰亚胺共聚合动力学

详细研究了聚合温度、引发剂用量、单体配比对苯乙烯(St)/N-苯基马来酰亚胺(PMI)共聚合动力学的影响.对St、甲基丙烯酸甲酯(MMA)和丙烯腈(AN)等单一或混合单体与PMI、N-环己基马来酰亚胺(ChMI)和N-邻氯苯基马来酰亚胺(o-CPMI)的共聚合进行了研究,并讨论了单体结构的影响.     

苯乙烯与N-对位取代苯基马来酰亚胺的乳液共聚

合成了苯乙烯(St)与 N-对位取代基马来酰亚胺的3种二元共聚物乳液.在苯乙烯与N-对位取代苯基马来酰亚胺(N-p-RPhMI)的最大共聚比内,通过种子滴加乳液聚合制得高稳定性、高固含量(40%)、低粘度的共聚物乳液.研究了 N-p-RPhMI 苯环对位上取代基团对共聚物乳液的性能以及共聚物热性能影响.结果表明:N-p-RPhMI 的加入提高了乳液的产率,并且随着取代基团极性的增强,乳液产率提高,乳胶粒的平均粒径增大,乳液的表观粘度降低;共聚物的热分解温度随着取代基团极性的增加而提高,但取代基极性对共聚物的玻璃化转变温度(Tg)的影响明显.同时,St/N-对甲氧基马来酰亚胺(N-p-MOPhMI)体系中助溶剂的加入对共聚物乳液性能影响很大,使共聚物的热起始分解温度升高,但对共聚物的 Tg 基本无影响.     

Maleimides As a Building Block for the Synthesis of High Performance Polymers

Maleimides are gaining a great deal of attention in both scientific and industrial communities since they can be used in high performance macromolecular systems: thermosets with high temperature stability, self-healing systems, or in click chemistry reactions. After an introduction, this review reports in the first part the different routes to synthesize maleimides. In the second part, this review focuses on the use of maleimides in polymer synthesis, first through nucleophilic reactions, second via cycloaddition to yield remendable systems, and then via radical polymerization. Finally, the industrial availability of maleimides is discussed.     

Development of a library of N-substituted maleimides for the local functionalization of linear polymer chains

A novel kinetic process was investigated for functionalizing "on-demand" local regions of well-defined linear polystyrene chains. This concept relies on the atom transfer radical copolymerization (ATRP) of functional N-substituted maleimides with styrene. This copolymerization is a controlled radical process, which combines two unique kinetic features: i) all the polymers chains are growing simultaneously and ii) the cross-propagation of the comonomers is highly-favored as compared to homopolymerization. Thus, discrete amounts of N-substituted maleimides (e.g., 1 equiv as compared to initiator) are consumed extremely fast in the copolymerization process and are therefore locally incorporated in narrow regions of the growing polystyrene chains. MALDI-TOF analysis of model copolymers indicated that this kinetic concept is efficient. Although a sequence distribution is observed, well-defined polymer chains having only one or two functional maleimide units per chain were found to be the most abundant species. Furthermore, the position of the functional groups in the polystyrene chains can be kinetically-controlled by adding the N-substituted maleimides at desired times during the course of the polymerization. This method is very versatile and can be applied to a wide variety of N-substituted maleimides. Herein, a library of 20 different maleimides bearing various functional groups (e.g., aromatic moieties, fluorinated groups, hydroxy functions, protected esters, protected amines, light-responsive moieties, fluorophores and biorelevant functions such as short poly(ethylene glycol) segments or biotin moieties) was investigated. In most cases, the functional N-substituted maleimides could be efficiently incorporated in the polystyrene chains.     

混杂聚合

混杂聚合是指同一体系内有两种或两种以上不同类型的聚合反应同时进行的过程,如自由基聚合与阳离子聚合,自由基聚合与缩聚等。混杂聚合能够在原位形成高分子合金,并有可能得到互穿网络结构（ＩＰＮ）,从而使聚合产物具备较好的综合性能。     

异丁基乙烯基醚与受电子单体的可控自由基共聚合

近年来发展起来的“活性” 可控自由基聚合越来越为人们所关注 ,其原因在于采用这种方法不仅可以设计聚合物的分子量 ,得到窄分布聚合物 ,而且聚合条件不象活性离子型聚合那样严格 ,单体适用范围相对较广 .关于烯类单体的活性自由基聚合迄今主要有 :氮氧自由基调控的稳定自由基聚合 (Ｓｔａｂｌｅｆｒｅｅｒａｄｉｃａｌｐｏｌｙｍｅｒｉｚａｔｉｏｎ ,简称ＳＦＲＰ) [1] 、原子转移自由基聚合 (Ａｔｏｍｔｒａｎｓｆｅｒｒａｄｉｃａｌｐｏｌｙｍｅｒｉｚａｔｉｏｎ ,简称ＡＴＲＰ) [2 ] 以及以后发展起来的自由基可逆加成 断链链转移聚合…     

N-对位取代苯基马来酰亚胺与苯乙烯溶液共聚动力学的研究

以DMF为溶剂 ,采用膨胀计法对N 对位取代苯基马来酰亚胺与苯乙烯的溶液共聚动力学作了系统研究 .其中N 苯基马来酰亚胺与苯乙烯的均相溶液聚合 ,聚合速率方程为Rp=k[I]1/ 2 [M ].同时还测定了四种N 对位取代苯基马来酰亚胺与苯乙烯在DMF中的共聚表观活化能 ,并由此证明四种单体的共聚活性及CTC络合物的存在     

Synthesis on N-Alkylated Maleimides

A two step synthesis of N-alkylated maleimides is presented. This method allows for the use of widely available starting materials and produces maleimides in high purity and yields. The maleimide precursors are of interest for potential thermo- and photo-setting polymerization processes.     

Synthesis and diels–alder polymerization of furfurylidene and furfuryl-substituted maleamic acids

The reactions of monomaleamic acid derived from an aromatic diamine with furfural afforded a novel class of furfurylidene-substituted maleamic acids 2a–2d . The latter were cyclodehydrated to yield maleimides 3a–3d which are AB-monomers for a Diels–Alder polymerization. In addition, N-furfurylmaleamic acid ( 4 ) was synthesized by reacting furfurylamine with maleic anhydride at ambient temperature. Cyclodehydration of 4 afforded N-furfurylmaleimide ( 5 ). The polymer precursors were characterized by IR and ¹H-NMR spectroscopy. Their curing behavior was investigated by DTA and correlated with chemical structures. Diels–Alder polymerization of monomers occurred at the temperature range of 113–210°C. Thermal stability of monomers was evaluated by TGA and isothermal gravimetric analysis (IGA). It was shown that thermal stability of the polymer derived from maleamic acid 4 was dramatically improved upon curing at high temperatures due to the formation by dehydration of a stable aromatic structure.     

微乳液聚合研究进展

从聚合机理和所得聚合物性能两个方面,分析总结了微乳液聚合与乳液聚合的差别.并介绍了微乳液聚合研究的国内外研究动态.     

端炔丙基化合物的聚合反应研究进展

端炔丙基化合物的聚合产物以其优异电导性,非线性光学特性等性能而引起人们的广泛兴趣,本文了近年来端炔丙基化合物的氧化聚合、易位聚合、自由基聚合、缩聚等聚合的研究进展。     

半连续乳液聚合

从聚合速率，粒径及粒径分布，粒子数，分子量及分子量分布，共聚物组成；胶乳稳定性及有面基团浓度，膜性能等方面介绍了半连续乳液聚合的特点，并阐述水溶性大单体对半连续乳液聚合及其产物性能的影响。