一种多光路光轴平行性检测系统

介绍一种用于检测多光路光电设备光轴平行性的测试系统,该系统采用准直平行光管提供无穷远目标,并融合了CCD图像采集处理和计算机技术,通过计算目标靶十字中心和激光光斑中心之间在CCD上的像素跨距,计算出红外、可见光以及激光三轴相互间的平行性误差,系统的计算误差小于5。     

A planar left-handed metamaterial based on electric resonators

A planar left-handed metamaterial(LHM) composed of electric resonator pairs is presented in this paper.Theoretical analysis,an equivalent circuit model and simulated results of a wedge sample show that this material exhibits a negative refraction pass-band around 9.6GHz under normal-incidence and is insensitive to a change in incidence angle.Furthermore,as the angle between the arm of the electric resonators and the strip connecting the arms increases,the frequency range of the pass-band shifts downwards.Consequently,this LHM guarantees a relatively stable torlerence of errors when it is practically fabricated.Moreover,it is a candidate for designing multi-band LHM through combining the resonator pairs with different angles.     

Doping-driven orbital-selective Mott transition in multi-band Hubbard models with crystal field splitting

We have studied the doping-driven orbital-selective Mott transition in multi-band Hubbard models with equal band width in the presence of crystal field splitting. Crystal field splitting lifts one of the bands while leaving the others degenerate. We use single-site dynamical mean-field theory combined with continuous time quantum Monte Carlo impurity solver to calculate a phase diagram as a function of total electron filling N and crystal field splitting Δ. We find a large region of orbital-selective Mott phase in the phase diagram when the doping is large enough. Further analysis indicates that the large region of orbital-selective Mott phase is driven and stabilized by doping. Such models may account for the orbital-selective Mott transition in some doped realistic strongly correlated materials.     

激光接收与彩色电视共窗口设计

介绍了激光接收和彩色电视共窗口的多波段光谱融合技术.采用一个焦距为20~450 mm的连续变焦距镜头(视场角在13.68°×10.26°~0.61°×0.46°内连续变化),在会聚光或平行光的条件下,采用立方棱镜或平板玻璃分光,分别进行了对比试验.结果显示,使用会聚光下的立方棱镜分光,在大视场13.68°×10.26°的情况下,光线入射角最大,色偏移严重,图像颜色严重失真.随着视场角的减小,光线入射角减小,图像颜色失真程度逐渐减小,越接近小视场0.61°×0.46°,图像颜色失真现象基本消失;而使用平板玻璃对平行光分光的条件下分光,连续变焦距镜头在整个视场范围内,不仅光学像差满足要求,同时解决了棱镜分光的色偏移问题,图像颜色正常,在空间尺寸苛刻的情况下,彩色电视光学系统MTF在108 lp/mm时达到了0.3,设计结果满足工程应用要求.     

Dual-band left-handed metamaterials fabricated by using tree-shaped fractal

<正>A method of fabricating dual-band left-handed metematerials(LHMs) is investigated numerically and experimentally by single-sided tree-like fractals.The resulting structure features multiband magnetic resonances and two electric resonances.By appropriately adjusting the dimensions,two left-handed(LH) bands with simultaneous negative permittivity and permeability are engineered and are validated by full-wave eigenmode analysis and measurement as well in the microwave frequency range.To study the multi-resonant mechanism in depth,the LHM is analysed from three different perspectives of field distribution analysis,circuit model analysis,and geometrical parameters evaluation.The derived formulae are consistent with all simulated results and resulting electromagnetic phenomena,indicating the effectiveness of the established theory.The method provides an alternative to the design of multi-band LHM and has the advantage of not requiring two individual resonant particles and electrically continuous wires,which in turn facilitates planar design and considerably simplifies the fabrication.     

基于红外隐身及多波段兼容隐身材料

随着探测系统的快速发展和探测精度的提高,隐身技术的需求日益迫切。由于传统的红外隐身材料面临着多途径目标探测的严峻挑战,因此开发既能满足红外隐身要求又能满足雷达隐身、可见光隐身、激光隐身要求的新型兼容隐身材料具有重要意义。红外隐身材料主要针对目标的红外辐射特征进行材料、结构设计,降低目标在背景中热红外辐射信号的突出性以及被热红外制导武器命中的概率。本综述概述了红外隐身及兼容材料的工作原理、制备方法及最新研究进展。首先介绍了最具有发展前景的红外隐身材料包括光子晶体、掺杂半导体、相变材料和纳米材料的结构特性、隐身机理和研究成果,重点关注了实现红外隐身的材料以及具体的隐身特性,讨论了红外兼容雷达、红外兼容可见光、红外兼容激光以及多波段兼容等材料的兼容隐身条件,并对其最新研究进展进行了系统的总结。最后,梳理了目前红外隐身材料以及各兼容材料所存在的不足及面临的困难,并对未来的研究方向进行了展望。     

用于生物医疗信息采集的多光谱均匀光源系统北大核心CSCD

多光谱成像是无创观察生物组织的有效工具,提高光源的辐照均匀性将更有利于准确获取病理组织的多光谱数据。提出基于积分球的多光谱均匀光源系统,为生物组织的多光谱数据采集提供均匀辐照。基于蒙特卡罗光线追迹法对积分球腔体的取位方式进行选择,并对腔体大小、LED布局、积分球输出槽尺寸进行了优化,以确定结构模型的最佳参数;根据优化参数构造了集成11种窄波段LED的实例进行了光学性能验证,实验结果证明所有波段都能在输出槽的主要部分区域实现2%辐照度不均匀性分布;研究了该系统的宽光谱兼容能力,实验结果表明,光谱在输出槽的最大均方根误差为3.74%,具有良好的宽光谱兼容能力;最后,基于所提出的系统进行了静脉可视化测试,用光纤拓展了系统内窥镜的兼容性,并以此探讨了口腔内部牙齿表面病理情况。该系统的多功能性和均匀性在生物医疗图像采集中具有潜在的应用价值。     

Simulated and experimental studies of a multi-band symmetric metamaterial absorber with polarization independence for radar applications

We develop a simple new design for a multi-band metamaterial absorber (MTMA) for radar applications. Computer Simulation Technology (CST) Studio Suite 2018 was used for the numerical analysis and absorption study. The simulated results show four high peaks at 5.6 GHz, 7.6 GHz, 10.98 GHz, and 11.29 GHz corresponding to absorption characteristics of 100%, 100%, 99%, and 99%, respectively. Furthermore, two different structures were designed and compared with the proposed MTMA. The proposed structure remained insensitive for any incident angle and polarization angle from 0° to 60°. Moreover, negative constitutive parameters were retrieved numerically. To support the simulated results, the proposed design was fabricated by using a computer numerical control-based printed circuit board prototyping machine and tested experimentally in a microwave laboratory. The absorption mechanism of the proposed MTMA is presented through the surface current and electric field distributions. The novelties of the proposed structure are a simple and new design, ease of fabrication, low cost, durability, suitability for real-time applications and long-term stability given the fabrication technique and non-destructive measurement method and very high absorption. The proposed structure has potential applications in C and X band frequency ranges.     

多轨道Hubbard模型的隶玻色子数值算法研究

通过综合模式搜索法、广义Lagrange乘子法、以及转轴法等多种数值方法, 建立了一套针对多轨道Hubbard模型隶玻色子解法的数值优化方法. 该数值方法能够在考虑晶场劈裂、轨道间跳跃以及真实能带结构基础上, 利用隶玻色子方法计算实际关联电子材料的性质. 首先利用该方法计算了两轨道体系的Mott金属-绝缘体转变性质, 得到了与目前已有工作一致的结果; 然后利用该方法讨论了Coulomb关联对三轨道体系Na_xCoO₂的影响. 结果表明: 在中间关联情况下由e_g^'轨道形成的六个小Fermi面消失, 原因是由于电子关联导致该轨道上的空穴数随U减少. 这些结果也证实了算法的正确性和有效性. 关键词： 多轨道Hubbard模型 隶玻色子 Mott转变 xCoO₂')" href="#">Na_xCoO₂     

语音编码技术及其硬件实现

压缩编码技术是无线语音通信的关键技术之一。介绍了语音编码技术的基本概念及分类,并选用AMBE多带激励压缩编码算法,通过单片机控制专用语音压缩DSP芯片,提出了一种适合低速无线语音、数据实时通信的系统解决方案,完成了硬件、软件设计,实现了低速率下的语音、数据的同步大气传输。测试结果显示,在语音编码速率为2．4kbps以下时,仍然可以得到音质较好的语音输出。