Theoretical investigation of effects of local cooling of a nozzle divergent section for controlling condensation shock in a supersonic two-phase flow of steam

In supersonic adiabatic two-phase flows of steam, under the influence of supersonic acceleration, the fluid loses its equilibrium conditions and becomes supersaturated. Following this condition and to restore the fluid to equilibrium, micro droplets of water form in the absence of any surface or foreign particles. This phenomenon is called homogeneous nucleation and the formed minute small droplets grow along the fluid flow path. The formation of these droplets and their growth causes the release of the latent heat of evaporation to the gas phase particularly in the nucleation region, and results in an increase in the flow pressure which is called the condensation shock. In this paper, and in continuation of the series of papers by the authors, in addition to analytically solving the adiabatic gas-liquid supersonic flow of steam in a convergent-divergent channel, a novel solution to controlling the undesired effects of this pressure rise (condensation shock) is presented. In the proposed method, with the help of cooling the divergent section of the nozzle, the analytical model for the 1D non-adiabatic two-phase steam flows is further developed which shows considerable decrease in the intensity of the formed condensation shock. Also the growth rate of the formed droplets due to the cooling of the steam flow has higher importance than the nucleation itself.     

Synthesis of diaryl sulfides via nickel ferrite‐catalysed C─S bond formation in green media

NiFe₂O₄ magnetic nanoparticles (MNPs) were synthesized, characterized and applied as an air‐stable, inexpensive and magnetically separable nanocatalyst for the synthesis of structurally diverse sulfides. Efficient methodologies were developed for the synthesis of unsymmetric diaryl sulfides via odourless and one‐pot reactions of triphenyltin chloride/S₈ or arylboronic acid/S₈ as thiolating agents with aryl halides or nitroarenes as starting materials in the presence of base (K₂CO₃ or NaOH) and NiFe₂O₄ MNPs as a catalyst in water or poly (ethylene glycol) as solvent at 80–110 °C. Free from ligand and the unpleasant smell of thiols and with the use of magnetically reusable nanocatalyst, green solvents and commercially available and cheap sulfur source and starting materials, these methods are more eco‐friendly and practical than available protocols for the synthesis of sulfides.     

Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

Phyto-synthesis of silver nanoparticles using aerial extract of Salvia leriifolia Benth and evaluation of their antibacterial and photo-catalytic properties

Research on Chemical Intermediates - We have synthesized silver nanoparticles (Ag-NPs) via a simple and eco-friendly method through the utilization of aqueous aerial parts of Salvia leriifolia...     

Performance improvement of PDMS/PES membrane by adding silicalite-1 nanoparticles: separation of xenon and krypton

The polydimethylsiloxane (PDMS) mixed matrix membrane with dispersed phase of nanozeolite silicalite-1 has been synthesized on polyethersulphone (PES) as a support, and its performance in the gas separation of xenon and krypton has been studied. For this purpose, nanozeolite silicalite-1 is synthesized by the hydrothermal clear solution method and is characterized by XRD and SEM analysis. In this research, the separation performance of MMM has also been compared with the polymeric PDMS membrane. Furthermore, the effect of feed pressure and loading percentage of nanozeolite in the polymeric matrix are evaluated. The results indicate that the addition of nanozeolite to the polymeric matrix improves its separation performance, and that the changes of the feed pressure have no major effect. The average permeability of the krypton and xenon gases through the PDMS polymeric membrane is calculated as 1.25 × 10^?9 and 1.78 × 10^?9 cm mol/(cm² s kPa), respectively, while by adding only 5 wt% of nanosilicalite-1 to the polymeric matrix of the membrane, this amount increased to 1.82 × 10^?9 and 8.07 × 10^?9 cm mol/(cm² s kPa), respectively. In addition, the presence of nanosilicalite-1 as the filler leads to an increase in the selectivity of xenon to krypton up to 4.38.     

AB INITIO MOLECULAR ORBITAL STUDY OF 1,2-DITHIANE AND 1,2,4,5-TETRATHIANE

Ab initio calculations at HF/6-31+G? level of theory for geometry optimization, and MP2/6-31+G?//HF/6-31+G? and B3LYP/6-31+G?//HF/6-31+G? levels for a single-point total energy calculation, are reported for the chair and twist conformations of 1,2-dithiane (1), 3,3,6,6-tetramethyl-1,2-dithiane (2), 1,2,4,5-tetrathiane (3), and 3,3,6,6-tetramethyl-1,2,4,5-tetrathiane (4). The C₂ symmetric chair conformations of 1 and 2 are calculated to be 21.9 and 8.6 kJ mol^?1 more stable than the corresponding twist forms. The calculated energy barriers for chair-to-twist processes in 1 and 2 are 56.3 and 72.8 kJ mol^?1, respectively. The C_2h symmetric chair conformation of 3 is 10.7 kJ mol^?1 more stable than the twist form. Interconversion of these forms takes place via a C₂ symmetric transition state, which is 67.5 kJ mol^?1 less stable than 3-Chair. The D₂ symmetric twist-boat conformation of 4 is calculated to be 4.0 kJ mol^?1 more stable than the C_2h symmetric chair form. The calculated strain energy for twist to chair process is 61.1 kJ mol^?1.     

New 5-bromo-2-hydroxybenzaldehyde S-ethylisothiosemicarbazone and its mixed-ligand Cu(II) complex with imidazole: synthesis, characterization and DFT calculation

A new Schiff base ligand of 5-bromo-2-hydroxybenzaldehyde S-ethyl-isothiosemicarbazone (H₂L) was synthesized and its mixed-ligand Cu(II) complex was also prepared by reaction of Cu(NO₃)₂·3H₂O with H₂L and imidazole. Their structures were fully characterized by elemental analysis, FT-IR, molar conductivity and UV-Vis methods. The analytical data suggest that the metal, H₂L and imidazole ratios in the Schiff base complex are 1:1:1. Single crystal diffraction was also used to better understand the molecular structure of the Cu(II) complex. The results of physico-chemical analyses of the Schiff base complex reveal the coordination geometry around the central atom is square planar. The H₂L ligand (NNO donor) is coordinated to the metal center as a tridentate bionegatively agent. Another position of the square planar geometry is occupied by the imidazole ligand. Furthermore, computational studies of the new complex were performed by carrying out DFT calculations. Geometry optimization and natural band analysis of the complex is discussed in further detail.      

Magnetic solid-phase extraction using Schiff base ligand supported on magnetic nanoparticles as sorbent combined with dispersive liquid-liquid microextraction for the extraction of phenols from water samples

ABSTRACT

In this work, the magnetic sorbent was developed by covalent binding of a Schiff base ligand, N,N’-bis(3-salicyliden aminopropyl)amine (salpr), on the surface of silica coated magnetic nanoparticles (Salpr@SCMNPs). The core-shell nanoparticle was applied for the magnetic solid-phase extraction (MSPE) combined with dispersive liquid-liquid microextraction (DLLME) of phenolic compounds from water samples prior to gas chromatography-flame ionisation detector (GC?FID). Characterisation of the Salpr@SCMNPs was performed with different physicochemical methods such as Fourier transform infrared (FT-IR), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). Variables affecting the performance of both extraction steps such as pH of the water sample, the sorbent amount, the desorption conditions, the extraction time; and extraction solvent were studied. Under the optimised conditions, the analytical performances were determined with a linear range of 0.01–100 ng mL^?1 and a limit of detection at 0.003–0.02 ng mL^?1 for all of the analytes studied. The intra-day (n = 5) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 6.9–8.9% and 7.3–10.1%, respectively. The proposed method was executed for the analysis of real water samples, whereby recoveries in the range of 92.9–99.0% and RSD% lower than 6.1% were attained.