Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

In the present work, the use of cylindrical turbulators in a double pipe heat exchanger has been investigated. Cylindrical fin type of turbulators has been placed circumferentially separated by 90° on the outer side of an inner pipe at a regular pitch. Experimental studies were undertaken for different air flow rates in a turbulent regime whose Reynolds number range between 2500 and 10000. Heat transfer characteristics like Nu and friction factor have been experimentally determined. Parametric studies were conducted by changing the pitch and also the orientation of the turbulators. Nu and friction factor were found to increase as the pitch is reduced. A model with alternatively changed orientation outperformed others by exhibiting highest Nu and reduced friction factor.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Integrating NiCo Alloys with Their Oxides as Efficient Bifunctional Cathode Catalysts for Rechargeable Zinc–Air Batteries

The lack of high‐efficient, low‐cost, and durable bifunctional electrocatalysts that act simultaneously for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is currently one of the major obstacles to commercializing the electrical rechargeability of zinc–air batteries. A nanocomposite CoO‐NiO‐NiCo bifunctional electrocatalyst supported by nitrogen‐doped multiwall carbon nanotubes (NCNT/CoO‐NiO‐NiCo) exhibits excellent activity and stability for the ORR/OER in alkaline media. More importantly, real air cathodes made from the bifunctional NCNT/CoO‐NiO‐NiCo catalysts further demonstrated superior performance to state‐of‐the‐art Pt/C or Pt/C+IrO₂ catalysts in primary and rechargeable zinc–air batteries.     

Determination of the Heat Transfer Coefficient of Metal Oxide Based Water Nanofluids in a Laminar Flow Regime Using an Adaptive Neuro-Fuzzy Inference System

In order to enhance the thermal properties of turbine oil (TO), three different nanoparticles (CuO, Al₂O₃, and TiO₂) are loaded into the TO. To measure the thermal performance of nanoparticle-based TO nanofluids at laminar flow and under constant heat flux boundary conditions, an experimental setup was applied. The obtained data clearly demonstrate the positive effect of all nanoparticles on the heat transfer rate of TO. As the most important factor, the heat transfer coefficient of the abovementioned two-phase systems is increased upon increasing both the volume concentration and the flow rate. An adaptive neuro-fuzzy inference system (ANFIS) is applied for modeling the effect of critical parameters on the heat transfer coefficient of nanoparticle-TO based nanofluids numerically. The results are compared with experimental ones for training and test data. The results suggest that the developed model is valid enough and promising for predicting the extant of the heat transfer coefficient. R² and MSE values for all data were 0.990208751 and 108.1150734, respectively. Based on the results, it is obvious that our proposed modeling by ANFIS is efficient and valid, which can be expanded for more general states.     

Synthesis of diaryl sulfides via nickel ferrite‐catalysed C─S bond formation in green media

NiFe₂O₄ magnetic nanoparticles (MNPs) were synthesized, characterized and applied as an air‐stable, inexpensive and magnetically separable nanocatalyst for the synthesis of structurally diverse sulfides. Efficient methodologies were developed for the synthesis of unsymmetric diaryl sulfides via odourless and one‐pot reactions of triphenyltin chloride/S₈ or arylboronic acid/S₈ as thiolating agents with aryl halides or nitroarenes as starting materials in the presence of base (K₂CO₃ or NaOH) and NiFe₂O₄ MNPs as a catalyst in water or poly (ethylene glycol) as solvent at 80–110 °C. Free from ligand and the unpleasant smell of thiols and with the use of magnetically reusable nanocatalyst, green solvents and commercially available and cheap sulfur source and starting materials, these methods are more eco‐friendly and practical than available protocols for the synthesis of sulfides.     

Microcapillary electrochemical droplet cells: applications in solid-state surface analysis

Capillary–based microcells, also known as microcapillary electrochemical droplet cells, have proved their capabilities in various electrochemical surface investigations in recent decades. Due to the large measured current density and the high limiting current, this technique provides high–resolution electrochemical responses. Current densities in the range from a few femto to pico Acm^?2 to hundreds of Acm^?2 can be measured using this technique. Various applications for microcapillary cells have been reported. Technical limitations, such as the Ohmic drop and changes in the composition of the measurement area near the tip of the microcapillary have also been considered by some researchers. The rapid increase in the application of microcells and the increase in the number of related reports published in the literature have paralleled recent attempts to develop and improve microcell setups, showing that this technique is already well established for electrochemical surface studies.     

Energy spectrum of multi-radiation of X-rays in a low energy Mather-type plasma focus device

The multi-radiation of X-rays was investigated with special attention to their energy spectrum in a Mather-type plasma focus device （operated with argon gas）. The analysis is based on the effect of anomalous resistances. To study the energy spectrum, a four-channel diode X-ray spectrometer was used along with a special set of filters. The filters were suitable for detection of medium range X-rays as well as hard X-rays with energy exceeding 30 keV. The results indicate that the anomalous resistivity effect during the post pinch phase may cause multi-radiation of X-rays with a total duration of 300 ± 50 ns. The significant contribution of Cu-Kα was due to the medium range X-rays, nonetheless, hard X-rays with energies greater than 15 keV also participate in the process. The total emitted X-ray energy in the forms of Cu-K and Cu-K/3 was around 0.14 ± 0.02 （J/Sr） and 0.04 ±0.01 （J/Sr）, respectively. The total energy of the emitted hard X-ray （〉 15 keV） was around 0.12± 0.02 （J/Sr）.     

Syntheses,Crystal Structures,and Properties of a New Lead(Ⅱ) Complex Involving Holo-and Hemidirected Coordination Spheres with 3,5,6-Tris(2-pyridyl)-1,2,4-triazine Ligand

[Pb(TPT)(μ-I)2PbI2(μ-I)2Pb(TPT)] 1(TPT is the abbreviation of 3,5,6-tris(2-pyridyl)-1,2,4-triazine ligand) has been synthesized and characterized by elemental analysis, IR, 1HNMR spectroscopy and studied by thermal and electrochemical properties as well as X-ray crystallography. The single-crystal X-ray data show two different kinds of Pb2+ ions in 1 with coordination numbers of six, Pb1 = PbI6, and five, Pb2 = PbN3I2, with holodirected and hemidirected coordination spheres, respectively. The supramolecular features in 1 are negotiated through the weak but directional Pb···I, C–H···N and C–H···I interactions and aromatic π-π stacking interactions.