Photoacoustic characteristics of lipid-rich plaques under ultra-low temperature and formaldehyde treatment

Photoacoustic imaging(PAI) has been used to characterize the spatial and quantitative features of lipid-rich atherosclerotic plaques with high sensitivity and specificity. In this Letter, we first validate that the ultra-low temperature and formaldehyde treatment have no effect on photoacoustic characteristics of the artery samples.Comparative experiments between the PAI and histological results demonstrate that the ultra-low temperature or formaldehyde treatment has few effects on the PAI of the lipid-rich atherosclerotic plaques; the lipid relative concentration and the lipid percentage by PAI hold high correlation with histology.     

准经典轨线方法对Ca+CD3Ⅰ→CaⅠ+CD3同位素效应的动力学研究

在扩展Lond-Eyring-Polanyi-Sato(LEPS)势能面上,采用准经典轨线方法对反应Ca+CD3I→CaI+CD3进行了动力学计算,并讨论了该反应的同位素效应.在同位素效应作用下,产物CaI的振动态分布向低振动态转移,反应体系的散射截面在低碰撞能和高碰撞能处有较小的变化.同时,受到反应物的质量因子变化的影响,产物转动取向值减少,产物转动取向增强.仅有产物的角分布受同位素效应的影响不明显.     

氦氩射频容性放电发射光谱分析

光抽运亚稳态稀有气体激光器利用放电等离子体作为激光的增益介质.为掌握容性射频放电的放电参数对等离子体各项参数的影响的基本规律,利用等离子体发射光谱法研究了氦氩混合气体在不同装置、不同Ar组分、不同气压和不同射频注入功率下的等离子体参数.利用残留水蒸气产生的OH自由基A~2Σ~+→X~2Π的转动光谱分析获得气体温度;利用电子态光谱的玻尔兹曼做图法获得电子激发温度,利用Ar原子696.5 nm谱线的斯塔克展宽获得电子密度.结果表明:气体温度随气压增加略微上升,在一个大气压下改变组分和放电功率,气体温度变化不大;电子激发温度随总气压的下降而上升,且随着Ar组分的增加而略微下降;目前放电条件下的电子密度均在10~(15)cm~(-3)量级;长时间放电监测表明,残留的水蒸气会导致电子温度的下降,从而降低Ar亚稳态的产率.     

半导体激光泵浦亚稳态氩气激光器实现激光振荡

采用基于体布拉格光栅的窄线宽半导体激光器作为泵浦源,以电容耦合式射频激励Ar, He混合气体放电等离子体为增益介质,在双程纵向泵浦的结构下实现了连续波模式的912 nm的激光输出。     

沟渠内杨木三合板架空燃烧的火灾行为的研究

建立了缩尺寸沟渠火灾试验模型,测量了沟渠以及平台入口附近的温度分布,研究了沟渠内杨木三合板架空燃烧的位置和沟渠的倾斜角度对火蔓延行为的影响,分析了火焰传播特征和火蔓延速率。试验结果表明:在沟渠效应和烟囱效应的综合作用下,火焰先从杨木三合板与沟渠底板之间的狭长空间传播到沟渠顶部,在入口处形成喷射状火焰;狭长空间内的温度先快速上升,且在一定时间内明显更高,倾斜角度越大,高温段越贴近三合板表面,传热作用越明显;当倾斜角度为30°和45°时,火蔓延速率较大,三合板的架空高度较小时,从沟渠蔓延到平台入口的热烟气较多。     

Multi-phase field simulation of competitive grain growth for directional solidification

The multi-phase field model of grain competitive growth during directional solidification of alloy is established. Solving multi-phase field models for thin interface layer thickness conditions, the grain boundary evolution and grain elimination during the competitive growth of SCN-0.24-wt% camphor model alloy bi-crystals are investigated. The effects of different crystal orientations and pulling velocities on grain boundary microstructure evolution are quantitatively analyzed. The obtained results are shown below. In the competitive growth of convergent bi-crystals, when favorably oriented dendrites are in the same direction as the heat flow and the pulling speed is too large, the orientation angle of the bi-crystal from small to large size is the normal elimination phenomenon of the favorably oriented dendrite, blocking the unfavorably oriented dendrite, and the grain boundary is along the growth direction of the favorably oriented dendrite. When the pulling speed becomes small, the grain boundary shows the anomalous elimination phenomenon of the unfavorably oriented dendrite, eliminating the favorably oriented dendrite. In the process of competitive growth of divergent bi-crystal, when the growth direction of favorably oriented dendrites is the same as the heat flow direction and the orientation angle of unfavorably oriented grains is small, the frequency of new spindles of favorably oriented grains is significantly higher than that of unfavorably oriented grains, and as the orientation angle of unfavorably oriented dendrites becomes larger, the unfavorably oriented grains are more likely to have stable secondary dendritic arms, which in turn develop new primary dendritic arms to occupy the liquid phase grain boundary space, but the grain boundary direction is still parallel to favorably oriented dendrites. In addition, the tertiary dendritic arms on the developed secondary dendritic arms may also be blocked by the surrounding lateral branches from further developing into nascent main axes, this blocking of the tertiary dendritic arms has a random nature, which can have aninfluence on the generation of nascent primary main axes in the grain boundaries.     

新型(3-取代苯基-2-丙烯-1-亚基)-苯甲酰腙类化合物的设计、合成及生物活性研究

为了发现有高杀菌活性的先导化合物,通过活性亚结构拼接方法,将具有生物活性的肉桂醛与苯甲酰肼进行拼接,设计合成了一系列新型(3-取代苯基-2-丙烯-1-亚基)-酰腙类化合物.该类化合物以取代的苯甲酸为原料,经3步反应制得,结构经1H NMR,IR及元素分析确证.离体生测结果表明部分化合物对蘑菇酪氨酸酶及小麦赤霉病、黄瓜灰霉病和黄瓜炭疽病表现出一定的抑制活性,并对化合物进行了初步构效关系分析,其中化合物5r表现出与多氧霉素B相当的杀菌活性.     

TEA-CO2激光辐照HgCdTe图像传感器的实验研究

利用TEA-CO₂激光对碲铬汞(HgCdTe)图像传感器的干扰和损伤现象进行了实验研究,分析了干扰和损伤机理。探测器上激光能量密度小于255 mJ/cm2时,饱和像素仅出现在光斑区域,激光能量密度为425.8 mJ/cm2时,像素被损伤,观察到了弥散斑和暗环等现象。建立了探测器的激光辐照模型,计算了探测器的温升,讨论了温升与载流子浓度、迁移率的关系。分析认为,弥散斑的出现是探测器升温产生的热激发载流子浓度扩散所致,暗环的出现是迁移率与载流子浓度扩散共同作用的结果,像素的损伤则是因为温升导致汞的析出。     

一类抽象动力算子的谱

本文提出了一类新的抽象动力算子,研究了这类算子的本质谱及离散本征值的分布。作为应用,本文给出了带有周期边界条件的具各向异性散射的迁移算子的谱分析。