定向倾斜枝晶生长规律及竞争行为的相场法研究

采用多相场模型对定向凝固过程中倾斜枝晶生长进行了研究, 模拟了单一取向枝晶列的演化规律及不同取向枝晶列汇聚生长竞争淘汰行为. 结果表明, 枝晶尖端过冷度随倾斜角度的增大而增大, 即相同条件下倾斜枝晶尖端位置总是低于非倾斜枝晶; 汇聚生长时择优取向枝晶总是阻挡非择优取向枝晶, 但在抽拉速度较低时, 由于溶质扩散场的相互重叠, 晶界处择优取向枝晶的生长受到相邻非择优枝晶的影响而延缓, 这可能导致非择优取向枝晶淘汰择优取向枝晶.     

基于元胞自动机方法的定向凝固枝晶竞争生长数值模拟

通过耦合温度场模型、溶质扩散方程以及枝晶生长动力学方程等重要因素,建立了一种改进的元胞自动机模型.该模型通过采用偏心算法消除网格各向异性,实现了二维尺度上任意角度枝晶生长的模拟,同时适用于模拟三维尺度上枝晶的生长过程.利用建立的模型开展了定向凝固枝晶竞争生长过程的数值模拟.为了体现本模型的有效性,模拟了透明合金的竞争生长过程,并与实验结果符合良好.镍基高温合金汇聚竞争和发散竞争的模拟结果清楚地展现了不同抽拉速度和枝晶优先生长角度下枝晶的竞争生长过程,并且模拟结果与理论模型相符合.三维枝晶生长的模拟结果表明本模型可以用来模拟三维枝晶一次臂间距的调整过程.     

Numerical study of growth competition between twin grains during directional solidification by using multi-phase field method

A multi-phase field model is established to simulate the growth competition and evolution behavior between seaweed and columnar dendrites during directional solidification.According to the effects of surface tension and interfacial energy,we quantitatively analyze the influences of factors such as inclination angles,pulling velocity,and anisotropic strength on twin growth.The results demonstrate that the pulling velocity and anisotropic strength have an important influence on the morphology and evolution of the seaweed and dendritic growth.The low pulling velocity and anisotropic strength are both key parameters for maintaining the stable morphology of seaweed during competitive growth in a bicrystal,showing that the lateral branching behavior is the root of the dendrites that can ultimately dominate the growth.And it is clarified that the lateral branching behavior and lateral blocking are the root causes of the final dominant growth of dendrites.With the increase of anisotropy strength,the seaweed is eliminated fastest in case 1,the seaweed is transformed into degenerate dendritic morphology,and eliminates the seaweed by promoting the generation and lateral growth of the lateral branches of the dendrites.The increase of pulling velocity is to increase the undercooling of favorable oriented grain and accelerate the growth rate of dendrites,thus producing more new primary dendrites for lateral expansion and accelerating the elimination rate of unfavorable oriented grain.     

Dendrite to symmetry-broken dendrite transition in directional solidification of non-axially oriented crystals

In this paper, the morphological transition from dendrite to symmetry-broken dendrite is investigated in the directional ;olidification of non-axially-oriented crystals using a quantitative phase-field model. The effects of pulling velocity and zrystal orientation on the morphological transition are investigated. The results indicate the orientation dependence of the ;ymmetry-broken double dendrites. A dendrite to symmetry-broken dendrite transition is found by varying the pulling telocity at different crystal orientations and the symmetry-broken multiple dendrites emerge as a transition state for the ;ymmetry-broken double dendrites. The state region during the transition can be well characterized through the variations ff the characteristic angle and the average primary dendritic spacing.     

宏微观耦合模拟熔池不同区域中枝晶竞争生长过程

针对熔化焊过程建立了宏微观耦合模型,模拟了熔池内不同区域凝固过程中随机取向枝晶的竞争生长过程. 通过宏观三维有限元模型计算熔池中瞬态的传热传质过程,利用双线性插值算法将凝固参数传递给微观组织模型. 采用元胞自动机法模拟随机取向的枝晶在熔池凝固条件下的竞争生长过程. 模拟结果表明,所建立的微观模型能够精确模拟任意生长取向的枝晶. 凝固条件中最大温度梯度方向对枝晶竞争过程有明显选择作用,生长方向与最大温度梯度方向相同或接近的枝晶在竞争中具有更大优势. 焊缝中的晶粒组织由枝晶簇发展形成,晶粒组织的形貌演变取决于相邻枝晶簇之间的竞争过程,具有择优取向的枝晶簇会逐渐排挤非择优取向的枝晶簇并最终将其阻挡在凝固组织内部,宏观晶粒的取向与其内部枝晶簇的生长方向并不一定相同. 熔池中心线附近区域在焊接过程中具有更小的温度梯度、更大的凝固速率以及更大的局部冷却速率,凝固后可以获得更加细小的焊缝枝晶组织. 枝晶间距的模拟结果与相应凝固条件下的试验数据符合较好. 关键词： 焊接熔池 枝晶形貌 竞争生长 元胞自动机     

Multi-phase field simulation of grain growth in multiple phase transformations of a binary alloy

This work establishes a temperature-controlled sequence function, and a new multi-phase-field model, for liquid–solid–solid multi-phase transformation by coupling the liquid–solid phase transformation model with the solid–solid phase transformation model. Taking an Fe–C alloy as an example, the continuous evolution of a multi-phase transformation is simulated by using this new model. In addition, the growth of grains affected by the grain orientation of the parent phase(generated in liquid–solid phase transformation) in the solid–solid phase transformation is studied. The results show that the morphology of ferrite grains which nucleate at the boundaries of the austenite grains is influenced by the orientation of the parent austenite grains. The growth rate of ferrite grains which nucleate at small-angle austenite grain boundaries is faster than those that nucleate at large-angle austenite grain boundaries. The difference of the growth rate of ferrites grains in different parent phase that nucleate at large-angle austenite grain boundaries, on both sides of the boundaries, is greater than that of ferrites nucleating at small-angle austenite grain boundaries.     

切向流动作用下SCN-3wt% H2O枝晶定向生长过程研究

实时观察了切向流动作用下SCN-3wt% H₂O合金的定向凝固过程,研究了该合金枝晶生长方向、尖端半径、枝晶一次臂间距以及二次臂生长速度的变化规律.实验观察到能够代表枝晶尖端溶质边界层的“亮带”,该亮带在流动作用下的非对称性证实了切向流动能够改变枝晶前沿溶质的对称分布,使溶质边界层厚度沿背流侧向迎流侧逐渐减薄,枝晶生长发生迎流偏转,且偏转角度随抽拉速度的提高而减小.同时,流场与浓度场的耦合促进枝晶间的优胜劣汰,枝晶一次臂间距显著增大.固液界面处的强迫流动还能够引发相邻枝晶间环流,加速迎流处二次臂生长而抑制背流处生长. 关键词： 定向凝固 枝晶生长 切向流动     

Formation of stray grains during directional solidification of a superalloy AM3

Stray grains were found during the preparation of single crystal superalloy AM3 by seeding technique and the researching on the competitive growth of bi-crystal. Stray grains were mainly observed at the diverging 〈001〉 corner of the mold wall. Therefore, increasing orientation deviation angle would intensify the possibility of the formation of stray grains. This was because the solute was inclined to enrich at the diverging 〈001〉 corner of mold wall, leading to the relatively large undercooling, and accordingly resulted in the formation of stray grains.     

基于改进元胞自动机模型的三元合金枝晶生长的数值模拟

在二元合金元胞自动机模型的基础上,通过耦合多元合金热力学相平衡求解器PanEngine, 建立了三元合金改进的元胞自动机模型,可模拟初生相枝晶的生长过程. 模型考虑了曲率过冷和成分过冷对界面平衡溶质成分的影响,通过不同组元的无量纲溶质过饱和度方程和界面溶质守恒方程之间的耦合来求解界面生长速率,并通过PanEngine计算界面处的液相线温度. 采用本模型模拟了Al-7%Si-xMg三元合金自由枝晶的生长形态, 结果表明Mg含量的增加会抑制枝晶一次臂的生长和二次臂的产生.同时模拟了不同抽拉速度下 Al-7%Si-0.5%Mg合金柱状枝晶的竞争生长过程,随着抽拉速度的增大,柱状枝晶一次枝晶臂间距逐渐减小, 与Hunt理论模型符合较好.     

Abnormal grain growth in Ni-5at.%W

The growth of abnormally large grains in textured Ni-5at.%W substrates for high-temperature superconductors deteriorates the sharp texture of these materials and thus has to be avoided. Therefore the growth of abnormal grains is investigated and how it is influenced by the grain orientation and the annealing atmosphere. Texture measurements and grain growth simulations show that the grain orientation only matters so far that a high-angle grain boundary exists between an abnormally growing grain and the Cube-orientated matrix grains. The annealing atmosphere has a large influence on abnormal grain growth which is attributed to the differences in oxygen partial pressure.     

晶体取向对定向凝固枝晶生长的影响

采用类金属透明模型合金丁二腈-1.0 wt%乙醇(SCN-1.0 wt% Eth)合金, 考察了晶体取向对定向凝固过程中晶粒的平界面失稳孕育时间、枝晶形态演化以及枝晶一次间距的影响. 结果表明, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 晶粒的平界面失稳孕育时间增加, 界面的稳定性增强; 对于不同晶体取向的枝晶形态演化, 枝晶择优生长方向与温度梯度方向夹角越大, 枝晶二次臂不对称生长越严重, 同时, 具有生长优势的枝晶二次臂对相邻枝晶的生长的抑制越强烈; 至于不同晶体取向的枝晶一次间距, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 枝晶一次间距增大. 关键词： 定向凝固 平界面失稳 枝晶间距 晶体取向     

Quantifying the grain boundary resistance against slip transfer by experimental combination of geometric and stress approach using stage-I-fatigue cracks

In recent studies, many groups have investigated the interaction of dislocations and grain boundaries by bi-crystals and micro-specimen experiments. Partially, these experiments were combined with supplementary simulations by discrete dislocation dynamics, but quantitative data for the grain boundary resistance against slip transfer is still missing. In this feasibility study with first results, we use stage-I-fatigue cracks as highly localised sources for dislocations with well-known Burgers vectors to study the interaction between dislocations in the plastic zone in front of the crack tip and selected grain boundaries. The stress concentration at the grain boundary is calculated with the dislocation-free zone model of fracture using the dislocation density distribution in the plastic zone from slip trace height profile measurements by atomic force microscopy. The grain boundary resistance values calculated from common geometric models are compared to the local stress distribution at the grain boundaries. Hence, it is possible to quantify the grain boundary resistance and to combine geometric and stress approach for grain boundary resistance against slip transfer to a self-contained concept. As a result, the prediction of the grain boundary resistance effect based on a critical stress concept is possible with knowledge of the geometric parameters of the grain boundary only, namely the orientations of both participating grains and the orientation of the grain boundary plane.     

二元合金多晶粒的枝晶生长的等温相场模型

基于Ginzburg-Landau理论和单晶粒的枝晶生长模型,发展了一个单相场控制的多个晶粒的枝晶生长模型. 采用相场和溶质场耦合的方法,以Al-2%Cu合金为例模拟了二元合金等温凝固过程中多个晶粒的生长过程. 结果表明,这个模型的计算结果展现了多个晶粒枝晶的竞争生长,能较真实的再现凝固过程中的枝晶的生长过程. 关键词： 相场法 多晶粒 等温凝固 二元合金     

晶体取向对定向凝固平界面失稳行为的影响

采用丁二腈-丙酮透明模型合金研究了不同晶体取向的晶粒在定向凝固条件下的平界面失稳过程.实验选择了三个界面失稳后具有不同生长形态的典型晶粒作为研究对象, 分别为择优生长枝晶、倾斜枝晶和海藻晶.结果表明可发展为择优生长枝晶的晶粒的平界面失稳孕育时间和初始扰动波长最小,海藻晶次之, 倾斜枝晶最大,这与以往的解析结果和相场模拟结果一致. 同时,实验观察发现可发展为择优生长枝晶和倾斜枝晶的晶粒的界面非稳态演化过程与海藻晶显著不同,这表明平界面失稳的非稳态演化过程与晶体取向相关.     

二元合金多晶粒的枝晶生长的等温相场模型

基于Ginzburg-Landau理论和单晶粒的枝晶生长模型，发展了一个单相场控制的多个晶粒的枝晶生长模型. 采用相场和溶质场耦合的方法，以Al-2%Cu合金为例模拟了二元合金等温凝固过程中多个晶粒的生长过程. 结果表明，这个模型的计算结果展现了多个晶粒枝晶的竞争生长，能较真实的再现凝固过程中的枝晶的生长过程.     

Statistical analyses of deformation twinning in magnesium

To extract quantitative and meaningful relationships between material microstructure and deformation twinning in magnesium, we conduct a statistical analysis on large data sets generated by electron backscattering diffraction (EBSD). The analyses show that not all grains of similar orientation and grain size form twins, and twinning does not occur exclusively in grains with high twin Schmid factors or in the relatively large grains of the sample. The number of twins per twinned grain increases with grain area, but twin thickness and the fraction of grains with at least one visible twin are independent of grain area. On the other hand, an analysis of twin pairs joined at a boundary indicates that grain boundary misorientation angle strongly influences twin nucleation and growth. These results question the use of deterministic rules for twin nucleation and Hall–Petch laws for size effects on twinning. Instead, they encourage an examination of the defect structures of grain boundaries and their role in twin nucleation and growth.     

Grain boundaries in the refined solidification structure of undercooled Ni75Pd25

When a single-phase alloy solidifies in a low-undercooling range or above a critical undercooling, grain-refined structures are obtained. Taking Ni₇₅Pd₂₅ alloy as an example, the microscopic orientation of the refined grains was investigated by electron backscattered diffraction technology. It is revealed that the refined grains at low undercooling are completely randomly distributed. In the refined structure at high undercooling, certain grain boundaries with misorientation angles less than 5° can be observed, while most of the grain boundaries have large misorientation angles. The inverse pole figure indicates that the refined grains at high undercooling have a textured crystallographic orientation. The fact that twins exist in the refined structure at high undercooling and the dendritic substructure arms exhibit no misorientation supports such an argument that the grain refinement at high undercooling results from the recrystallization of the solidification dendrites.     

Phase——field model of isothermal solidification withmultiple grains growth

This paper develops a new phase--field model for equiaxed dendrite growth of multiple grains in multicomponent alloys based on the Ginzberg--Landau theory and phase--field model of a single grain. Taking Al--Cu and Al--Cu--Mg alloys for example, it couples the concentration field and simulates the dendrite growth process of multiple grains during isothermal solidification. The result of the simulation shows dendrite competitive growth of multiple grains, and is reapplied to the process of dendrite growth in practical solidification.