1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

微脉冲电子枪的初步实验研究

给出了微脉冲电子枪的模拟计算及其初步实验结果. 该电子枪采用铜铝镁合金作为冷阴极材料, 在以磁控管作为微波功率源的出束实验中得到了100mA/cm²的电流密度.实验结果与次级电子倍增解析计算和SEEG程序的模拟计算结果基本符合, 初步验证了微脉冲电子枪的基本原理, 为今后实验中得到更大的电流密度打下了基础.     

Development of a China test cryomodule for ILC

Research and development of a 1.3 GHz 9-cell cavity test cryomodule were carried out by a collaboration group between IHEP (Institute of High Energy Physics) and TIPC (Technical Institute of Physics and Chemistry) in China. The cryomodule is a "test model" for the ILC cryomodule, and a key component of a superconducting accelerator test unit which will be built in the near future, also can be used as a horizontal test facility for 1.3~GHz 9-cell cavities. This paper presents the development status of the cryomodule, including structure design, cryogenic flow diagram, thermal and mechanical simulations, heat load estimation and etc.     

1.3 GHz 9单元Ichiro型模型铜腔的预调谐

 以常用的多单元超导腔预调谐方法为基础,搭建了一套完整的预调谐系统,并实现了超导腔预调谐测量的自动化。实验首先通过网络分析仪对超导腔进行测量,利用Labview进行数据采集,并协同控制步进电机。通过“拉小珠”的微扰法,测量沿小珠运动路径的场分布。编写了一套Java程序,通过矩阵运算,计算出9单元腔各个腔单元频率的校正量。根据计算结果对9单元腔的某个单元进行挤压或拉抻,经多次上述操作后,在较高精度范围内,可将9单元铜腔的每个腔单元调谐至预期的目标频率。     

Study on the 1.3 GHz low loss shape superconducting cavities at IHEP

As part of the international research program on the superconducting cavity for the International Linear Collider (ILC) R&;D on the 1.3 GHz low loss superconducting cavities has been carried out at the Institute of High Energy Physics (IHEP) since 2005. A design of 1.3 GHz low loss cavity shape was proposed and six single-cell cavities of different niobium material were successfully fabricated with standard technology. In this study our priority was on large grain (LG) cavities. The two LG cavities were treated with complete procedures of surface treatments based on chemical polishing (CP) without electro polishing (EP) at IHEP. The two LG cavities and a fine grain cavity were sent to KEK for vertical testing. All the three cavities reached accelerating gradients higher than 35 MV/m and the maximum gradient of 40.27 MV/m was achieved in the LG cavity. This paper presents the process of the vertical RF tests and the comparison of the LG and fine grain cavities's performance.     

9-cell超导腔快速预调谐方法研究

对频率和场平坦度的预调谐是9-cell超导腔耗时最多的后处理工序之一,很快将成为国内相关大科学工程9-cell腔批量生产的瓶颈。首先介绍了9-cell超导腔两种常用的预调谐方法,即DESY方法和Cornell方法的原理,建模分析和比较了两种方法的计算精度和误差来源,给出Cornell方法调谐量计算的修正。然后结合9-cell超导腔预调谐实验研究,给出了快速预调谐方法:DESY的重建算法在低场平时精度较高且收敛迅速,可作为粗调;Cornell微扰算法在高场平时精度较高且测量迅速,可作为微调。结合两种调谐方式,将预调谐分为粗调和微调两步,可有效提升9-cell超导腔预调谐的速度。     

ADS 650 MHz medium beta cavity study and design

The Accelerator Driven Sub-critical System (ADS) is under development aiming at safe disposal of nuclear waste and providing electric power in China. The main accelerator of ADS is composed of two injector sections and one main linear acceleration section. The 650 MHz β=0.82 superconducting cavities will be adopted to accelerate the proton bunches from 360 MeV to 1.5 GeV in the medium energy section. This paper presents the study and design results of this kind of superconducting cavity.     

Thermal simulation and analysis of the STF cryomodule

STF is a superconducting RF test facility constructed at the high energy accelerator research organization of Japan (KEK), as a main part of a R&;D project for the proposed International Linear Collider (ILC) in Asia. Thermal study of the STF 1.3 GHz 9-cell cavity cryomodule was carried out within a collaboration between China and Japan. Static and dynamic thermal behaviors of the STF cryomodule were simulated and analyzed with the FEM method, and some simulation results were compared with the available experimental data. This paper presents the details.     

An ADS 650 MHz medium beta cavity study and design

The Accelerator Driven Sub-critical System (ADS) is under development and aims at the safe disposal of nuclear waste and providing electric power in China. The main accelerator of the ADS is composed of two injector sections and one main linear acceleration section. The 650 MHz β=0.82 superconducting cavities will be adopted to accelerate the proton bunches from 360 MeV to 1.5 GeV in the medium energy section. This paper presents the study and design results of this kind of superconducting cavity.     

Design studies on the ERL-FEL test facility at IHEP, Beijing

A proposed compact ERL test facility at IHEP, Beijing, is presented in this paper, and includes the design parameters, the essential lattice, and the key components features, such as the photocathode DC gun and the CW superconducting accelerating structures. Some important beam physics issues such as the space charge effect, the coherent synchrotron radiation (CSR) effect and the beam break-up (BBU) effect are briefly described with the simulation results.