Understanding charge transfer of Li~+ and Na~+ ions scattered from metal surfaces with high work function

For Li~+ and Na~+ ions scattered from high work function metal surfaces, efficient neutralization is observed, and it cannot be explained by the conventional free electron model. In order to explain these experimental data, we investigate the velocity-dependent neutral fraction with the modified Brako–Newns(BN) model. The calculated results are in agreement with the experimental data. We find that the parallel velocity effect plays an important role in neutralizing the Li~+ and Na~+ ions for large angle scattering. The nonmonotonic velocity behavior of neutral fraction is strongly related to the distance-dependent coupling strength between the atomic level and metal states.     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布（medical gauze,MG）同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒（MnO₂ NPs/MG）,并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布(medical gauze,MG)同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒(MnO₂ NPs/MG),并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

微型电子回旋共振离子源的全局模型

微型电子回旋共振(electron cyclotron resonance, ECR)离子源在紧凑型离子注入机、小型中子管、微型离子推进器等领域有着十分广泛的应用.为了深入认识微型ECR离子源的工作机理,本文以北京大学自主研制的一款微型氘离子源作为研究对象,以氢气和氘气放电形成的等离子体为例,发展了一种基于粒子平衡方程的全局模型.研究结果表明,该离子源束流成分与离子源的运行气压和微波功率有着很强的依赖关系.对于氢气放电等离子体,微波功率低于100 W时,离子源可以分别在低气压和高气压情况下获得离子比超过50%的H~+₂离子束和H~+₃离子束;当微波功率高于100 W时,可以在很宽的运行气压范围内,获得质子比超过50%的束流.因此,提高微波功率是提高微型离子源质子比的关键.对于氘气放电等离子体, 3种离子比例对运行气压和微波功率的依赖关系与氢气放电等离子体的规律基本一致.但是在相同的运行条件下, D~+比例比H~+比例高10%—25%.也就是说,在微型氘离子源的测试和优化过程中,可以利用氢气代替氘气进行实验,并将质子比测量结果作为相同条件下氘离...     

Understanding hydrogen plasma processes based on the diagnostic results of 2.45 GHz ECRIS at Peking University

Optical emission spectroscopy(OES), as a simple in situ method without disturbing the plasma, has been performed for the plasma diagnosis of a 2.45 GHz permanent magnet electron cyclotron resonance(PMECR) ion source at Peking University(PKU). A spectrum measurement platform has been set up with the quartz-chamber electron cyclotron resonance(ECR) ion source [Patent Number: ZL 201110026605.4] and experiments were carried out recently. The electron temperature and electron density inside the ECR plasma chamber have been measured with the method of line intensity ratio of noble gas. Hydrogen plasma processes inside the discharge chamber are discussed based on the diagnostic results. What is more, the superiority of the method of line intensity ratio of noble gas is indicated with a comparison to line intensity ratio of hydrogen. Details will be presented in this paper.     

基于高斯伪谱法的高超声速飞行器再入制导研究

针对高超声速飞行器再入标准轨迹制导方法中存在的制导准备周期长、弹上需存储标准轨迹参数、制导鲁棒性较差等缺点,本文提出了一种基于高斯伪谱法与滚动时域控制技术相结合的高超声速飞行器再入预测-校正制导方案。其中,在线高斯伪谱法采用纵/侧向、全程一体化的制导算法思路,从而实现了对高超声速飞行器再入弹道的全程预测-校正。同时结合滚动时域控制技术从工程上实现了高超声速飞行器再入制导中对开环制导信息的闭环应用,完成了飞行器预测-校正制导方案。通过对高超声速飞行器再入制导过程进行仿真分析,其结果表明应用本文设计的基于高斯伪谱法与滚动时域控制技术相结合的高超声速飞行器再入预测-校正制导方案,飞行器再入过程中具有良好的制导性能。     

A fast emittance measurement unit for high intensity DC beam

A combined unit, which has the ability to measure the current and emittance of the high intensity direct current(DC)ion beam, is developed at Peking University(PKU). It is a multi-slit single-wire(MSSW)-type beam emittance meter combined with a water-cooled Faraday Cup, named high intensity beam emittance measurement unit-6(HIBEMU-6). It takes about 15 seconds to complete one measurement of the beam current and its emittance. The emittance of a 50-mA@50-kV DC proton beam is measured.     

A miniaturized 2.45 GHz ECR ion source at Peking University

A miniaturized 2.45 GHz permanent magnet electron cyclotron resonance(PMECR) ion source, which has the ability of producing a tens-m A H+beam, has been built and tested at Peking University(PKU). Its plasma chamber dimension is Φ30 mm×40 mm and the whole size of the ion source is Φ180 mm×130 mm. This source has a unique structure with the whole source body embedded into the extraction system. It can be operated in both continuous wave(CW) mode and pulse mode. In the CW mode, more than 20 m A hydrogen ion beam at 40 k V can be obtained with the microwave power of 180 W and about 1 m A hydrogen ion beam is produced with a microwave power of 10 W. In the pulse mode, more than50 m A hydrogen ion beam with a duty factor of 10% can be extracted when the peak microwave power is 1800 W.     

Practical 2.45-GHz microwave-driven Cs-free Hˉ ion source developed at Peking University

A practical 2.45-GHz microwave-driven Cs-free Hˉ source was improved based on the experimental Hˉ source at Peking University(PKU). Several structural improvements were implemented to meet the practical requirements of Xi'an Proton Application Facility(XiPaf). Firstly, the plasma chamber size was optimized to enhance the plasma intensity and stability. Secondly, the filter magnetic field and electron deflecting magnetic field were enhanced to reduce co-extracted electrons. Thirdly, a new two-electrode extraction system with farther electrode gap and enhanced water cooling ability to diminish spark and sputter during beam extraction was applied. At last, the direct Hˉ current measuring method was adopted by the arrangement of a new pair of bending magnets before Faraday cup(FC) to remove residual electrons. With these improvements, electron cyclotron resonance(ECR) magnetic field optimization experiments and operation parameter variation experiments were carried out on the Hˉ ion source and a maximum 8.5-mA pure Hˉ beam was extracted at 50 kV with the time structure of 100 Hz/0.3 ms. The root-mean-square(RMS) emittance of the beam is 0.25 Π·mm·mrad. This improved Hˉ source and extraction system were maintenance-free for more than 200 hours in operation.     

Surface enhancement of molecular ion H_2~+ yield in a 2.45-GHz electron–cyclotron resonance ion source

High current hydrogen molecular ion beam is obtained with a specially designed stainless steel liner permanent magnet2.45-GHz electron–cyclotron resonance(ECR) ion source(PMECR II) at Peking University(PKU). To further understand the physics of the hydrogen generation process inside a plasma chamber, theoretical and experimental investigations on the liner material of the plasma chamber in different running conditions are carried out. Several kinds of materials, stainless steel(SS), tantalum(Ta), quartz, and aluminum(Al) are selected in our study. Experimental results show that stainless steel and tantalum are much better than others in H~+_2 generation. During the experiment, an increasing trend in H~+_2 fraction is observed with stainless steel liner after O_2 discharge inside the ion source. Surface analyses show that the roughness change on the surface after O_2 discharge may be responsible for this phenomenon. After these studies, the pure current of H~+_2 ions can reach 42.3 mA with a fraction of 52.9%. More details are presented in this paper.