Geometry optimization in planetary rotation stage for thickness uniformity of films on spherical substrates

We report the simulation results on the thickness uniformity of optical coatings deposited on spherical substrates by optimizing the geometric configuration parameters, such as tilting angle of the substrate holder and position of the evaporation source in a 1 000-mm-diameter planetary rotation stage （PRS）. We reveal that good film uniformity on convex spherical surfaces or flat substrates, as well as concave surfaces with weak to moderate curvatures can be obtained through appropriate tilting of the substrate holder. For 300-mm-diameter substrates with clear aperture to radius of curvature （CA/RoC） between 0.3 and 0.7, the achievable film uniformity is above 99%. The source position is optimized to achieve good film uniformity.     

中红外光参变振荡器在高反射率测量中的应用

根据光腔衰荡光谱技术(CRDS)原理,使用中红外光参变振荡器(OPO)为光源建立了直腔与折叠腔相结合的中红外波段3.6 μm 反射率测量实验装置,用于研究中红外波段的高反射膜反射率,测试精度为10-4。使用直型衰荡光腔测试了三对不同薄膜材料设计镀制的高反射腔镜的反射率,并选择了一对腔镜用于实验装置中。采用该装置精确测试了不同薄膜材料镀制的高反射膜的反射率,包括YbF3/ZnS,YbF3 /ZnSe多层膜,以及由银加保护膜镀制的反射镜。研究表明,中红外波段介质膜的反射率可达到R>0.9990,其中由YbF3/ZnSe镀制在硅基底上的多层介质膜3.6 μm反射率可达到99.96％。     

Determination of optical constants in DUV/VUV

An approach for determining the optical constants of the weakly absorbing substrate is developed and applied to obtain the parameters of CaF2 and fused silica substrates in deep ultraviolet （DUV） and vacuum ultraviolet （VUV） range. A method for extracting the optical constants of thin films deposited on strongly absorbing substrate, which is based on the reflectance spectra measured at different angles of incidence, is also presented. The optical constants are determined by fitting the measured spectra to the theoretical models. The proposed method is applied to determine the refractive index and extinction coefficient （n, k） of MgF2 film deposited on silicon substrate by electron beam evaporation with substrate temperature 300 ℃ and deposition rate 0.2 nm/s. The determined n, k values at 193 nm are 1.433 and 9.1×10-4, respectively.     

光学平板偏振分光镜对称膜系的优化设计

 提出一种新算法,用于优化设计对称膜系光学偏振膜。所设计膜系能保证在较宽的工作带宽内有高的消光比(>1000); 而且膜系结构简单,设计灵活,镀制该偏振膜容易实现。     

波长1064nm脉冲激光高阈值反射膜的研制

 研究HfO₂/SiO₂高反射膜的制备工艺及其激光诱导损伤阈值的比较测试,分别采用了反应蒸镀HfO₂、反应离子辅助蒸镀HfO₂、反应离子辅助蒸镀金属Hf的源材料形成HfO₂薄膜。采用这三种工艺制备了HfO₂/SiO₂高反射膜,在中心波长1064nm处,反射率 R≥99.5%,其中反应蒸镀HfO₂/SiO₂高反射膜损伤阈值最高,可达60J/cm²(1064nm,5ns)。     

波长1O64nm脉冲激光高阈值反射膜的研制

研究 Ｈｆ Ｏ２／ Ｓｉ Ｏ２ 高反射膜的制备工艺及其激光诱导损伤阈值的比较测试,分别采用了反应蒸镀 Ｈｆ Ｏ２、反应离子辅助蒸镀 Ｈｆ Ｏ２、反应离子辅助蒸镀金属 Ｈｆ 的源材料形成 Ｈｆ Ｏ２ 薄膜。采用这三种工艺制备了 Ｈｆ Ｏ２ ／ Ｓｉ Ｏ２ 高反射膜,在中心波长 １０６４ｎｍ 处,反射率 Ｒ≥９９．５％ ,其中反应蒸镀 Ｈｆ Ｏ２ ／ Ｓｉ Ｏ２ 高反射膜损伤阈值最高,可达 ６０ Ｊ／ｃｍ ２（１０６４ｎｍ ,５ｎｓ）。     

等离子体辅助沉积HfO_2/SiO_2减反、高反光学薄膜

本文报导了用等离子体辅助（Ｐｌａｓｍａ－ＩＡＤ）沉积技术沉积ＨｆＯ２／ＳｉＯ２减反及高反光学薄膜。在波长１０６４ｎｍ处，ＨｆＯ２／ＳｉＯ２减反膜透过率大于９９．５％，ＨｆＯ２／ＳｉＯ２高反膜反射率大于９９．５％。