Effects of SiNx on two-dimensional electron gas and current collapse of AlGaN/GaN high electron mobility transistors

SiN_x is commonly used as a passivation material for AlGaN/GaN high electron mobility transistors (HEMTs). In this paper, the effects of SiN_x passivation film on both two-dimensional electron gas characteristics and current collapse of AlGaN/GaN HEMTs are investigated. The SiN_x films are deposited by high- and low-frequency plasma-enhanced chemical vapour deposition, and they display different strains on the AlGaN/GaN heterostructure, which can explain the experiment results.     

Effects of SiNx on two-dimensional electron gas and current collapse of A1GaN/GaN high electron mobility transistors

SiNx is commonly used as a passivation material for AlGaN/GaN high electron mobility transistors (HEMTs). In this paper, the effects of SiN x passivation film on both two-dimensional electron gas characteristics and current collapse of AlGaN/GaN HEMTs are investigated. The SiNx films are deposited by high- and low-frequency plasma-enhanced chemical vapour deposition, and they display different strains on the AlGaN/GaN heterostructure, which can explain the experiment results.     

非故意掺杂GaN薄膜方块电阻与载气中N2比例关系研究

利用金属有机气相外延方法研究了非故意掺杂GaN薄膜的方块电阻与高温GaN体材料生长时载气中N₂比例的关系.研究发现,随着载气中N₂比例的增加,GaN薄膜方块电阻急剧增加.当载气中N₂比例为50%时,GaN薄膜方块电阻达1.1×10⁸Ω/□,且GaN表面平整,均方根粗糙度为0.233nm.二次离子质谱分析发现,载气中N₂比例不同的样品中碳、氧杂质含量无明显差别.随着载气中N₂比 关键词： 半绝缘GaN薄膜 载气 金属有机气相外延 位错     

非故意掺杂GaN薄膜方块电阻与载气中N2比例关系研究

利用金属有机气相外延方法研究了非故意掺杂GaN薄膜的方块电阻与高温GaN体材料生长时载气中N2比例的关系.研究发现,随着载气中N2比例的增加,GaN薄膜方块电阻急剧增加.当载气中N2比例为50%时,GaN薄膜方块电阻达1.1×108Ω/□,且GaN表面平整,均方根粗糙度为0.233 nm.二次离子质谱分析发现,载气中N2比例不同的样品中碳、氧杂质含量无明显差别.随着载气中N2比例的增加,GaN材料中螺型位错相关缺陷密度无明显变化,而刃型位错相关缺陷密度明显增加.结果表明,刃型位错的受主补偿作用是导致GaN薄膜方块电阻变化的主要原因.     

Effects of AlN nucleation layer thickness on crystal quality of AlN grown by plasma-assisted molecular beam epitaxy

In this paper,the effects of thickness of AlN nucleation layer grown at high temperature on AlN epi-layer crystalline quality are investigated.Crack-free AlN samples with various nucleation thicknesses are grown on sapphire substrates by plasma-assisted molecular beam epitaxy.The AlN crystalline quality is analysed by transmission electron microscope and x-ray diffraction (XRD) rocking curves in both (002) and (102) planes.The surface profiles of nucleation layer with different thicknesses after in-situ annealing are also analysed by atomic force microscope.A critical nucleation thickness for realising high quality AlN films is found.When the nucleation thickness is above a certain value,the (102) XRD full width at half maximum (FWHM) of AlN bulk increases with nucleation thickness increasing,whereas the (002) XRD FWHM shows an opposite trend.These phenomena can be attributed to the characteristics of nucleation islands and the evolution of crystal grains during AlN main layer growth.     

AlN/蓝宝石模板上生长的GaN研究

研究了在分子束外延制备的AlN/蓝宝石模板上采用金属有机物化学气相外延生长的非故意掺杂GaN的材料性质.采用X射线衍射(XRD)、透射电镜(TEM)和原子力显微镜研究了AlN模板的晶体质量和表面相貌对GaN的影响.结果表明,当AlN的表面粗糙度较小时,尽管AlN模板的位错密度较高((102)面XRD ω扫描半高全宽900—1500 arcsec),但生长得到的GaN依然具有和在蓝宝石衬底上采用"二步法"生长的GaN可比拟的晶体质量((002)面XRD ω扫描半高全宽200—30 关键词： 氮化镓 氮化铝 金属有机物化学气相外延     

Improvement of A1N Film Quality by Controlling the Coalescence of Nucleation Islands in Plasma-Assisted Molecular Beam Epitaxy

The influence of nucleation coalescence on the crystalline quality of A1N films grown on sapphire by plasma- assisted molecular beam epitaxy is investigated. The coalescence speed is controlled by the V/Ⅲ ratio chosen for the growth after nucleation. A slightly Al-rich condition, corresponding to slow coalescence, can significantly reduce the density of edge threading dislocation （TD）, which is found to be dominant in AIN epilayers. The cross-sectional TEM image of the AIN epilayer grown under this condition clearly reveals an automatically formed boundary where an abrupt decrease of edge TD density occurs.     

AIN/蓝宝石模板上生长的GaN研究

研究了在分子束外延制备的AIN/蓝宝石模板上采用金属有机物化学气相外延生长的非故意掺杂GaN的材料性质.采用X射线衍射(XRD)、透射电镜(TEM)和原子力显微镜研究了AIN模板的晶体质量和表面相貌对GaN的影响.结果表明,当AIN的表面粗糙度较小时,尽管AIN模板的位错密度较高((102)面XRD ω扫描半高全宽900-1500 arcsec),但生长得到的GaN依然具有和在蓝宝石衬底上采用"二步法"生长的GaN可比拟的晶体质量((002)面XRD ω扫描半高伞宽200-300 arcsec,(102)面400-500 arcsec)和表面粗糙度(0.1-0.2 nm).TEM照片表明GaN中位错密度降低的原因是AIN中的一部分位错在AIN和GaN的界面处被终止而未能延伸至GaN中.这可能是因为Ga原子尺寸较大,具有修复晶格缺陷的作用.而当AIN的表面粗糙度较大时,Ga原子在MOVPE生长过程中的迁移受到影响.得到的GaN晶体质量非常差.此外,采用范德堡法测量的GaN电阻率为105-106Ω·cm,比蓝宝石衬底上生长的GaN高大约6个数量级,这被认为是采用AIN代替GaN低温缓冲层所致.     

AlGaN表面坑状缺陷及GaN缓冲层位错缺陷对AlGaN/GaN HEMT电流崩塌效应的影响

利用金属有机气相外延(MOVPE)技术生长了具有不同AlGaN表面坑状缺陷和GaN缓冲层位错缺陷密度的AlGaN/GaN 高电子迁移率晶体管(HEMT)样品,并对比研究了两种缺陷对器件栅、漏延迟电流崩塌效应的影响.栅延迟测试表明,AlGaN表面坑状缺陷会引起栅延迟电流崩塌效应和源漏电阻的增加,而且表面坑状缺陷越多,栅延迟电流崩塌程度和源漏电阻的增加越明显.漏延迟测试显示,AlGaN表面坑状缺陷对漏延迟电流崩塌影响不大,而GaN缓冲层位错缺陷主要影响漏延迟电流崩塌.研究结果表明,AlGaN表面坑状缺陷和Ga 关键词： AlGaN/GaN HEMT 电流崩塌 坑状缺陷 位错缺陷