Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

USING EIGENMODULI AND EIGENSTATES TO EVALUATE THE POSSIBILITY OF MARTENSITIC PHASE TRANSFORMATIONS

Journal of Applied Mechanics and Technical Physics - The possibility of phase transitions (martensitic transformations) in&nbsp;shape-memory alloys is evaluated using the concept of eigenmoduli...     

On the Theory of Acoustic Scanning of Damage to Underground Pipelines

Acoustical Physics - The paper studies the evolution of a pulsed signal initiated by the pushing of a cylindrical piston and propagating through a stationary fluid filling a buried pipeline with an...     

Raman Scattering Study of Natural and Synthetic Compounds Containing Polyene Chains

Doklady Physics - The dependence of Raman spectra of the molecules containing polyene chains on the conjugation length, structure of side and end groups, and isomer type is analyzed theoretically.     

Complexes of Nitrilotriacetic Acid with Amines. Molecular Structures of 2-Ammonioethanol Nitrilotriacetate and Bis{2-Ammonio-2-(Hydroxymethyl)propane-1,3-Diol} Nitrilotriacetate

Crystallography Reports - Reactions of nitrilotriacetic acid with 2-aminoethanol, 2-amino-2-(hydroxymethyl)propane-1,3-diol, and 2,2'-(ethylenedioxy)bis(ethylamine) afford the following salts...     

Crystal Structure of the First Representative of the Eudialyte Group with Primitive Unit Cell

Crystallography Reports - The first representative of the eudialyte group with a primitive unit cell has been investigated by X-ray diffraction analysis, electron probe microanalysis, and IR...     

A Modular Peel Fixture for Tape Peel Tests on Immovable Substrates

Background

Peel tests are frequently used to perform measurements of adhesive strength for pressure sensitive adhesive (PSA) tapes. Current lab methodologies for 90° peel tests translate the model substrate orthogonally to the peel direction in order to maintain the peel angle, precluding testing from immovable substrates.

Objective

It was our objective to develop a peel fixture capable of testing temporary pavement marking (TPM) tapes and other PSA tapes from immovable substrates such as roadways surfaces.

Methods

We present a modular peel fixture for conducting peel experiments directly on immovable substrates. The fixture was validated through a series of peel tests on consumer tapes to reproduce the linear width dependence and viscoelastic rate dependence found in traditional peeling setups. To test the capabilities of the fixture, a series of peel tests were conducted with various tapes on controlled surfaces, and a commercial tape on various immovable substrates.

Results

We demonstrate the ability of our fixture to reproduce results reported for traditional peel tests from literature. In addition, we were able to conduct peel tests directly on immovable substrates such as the benchtop.

Conclusions

This fixture shows potential for both traditional peeling tests, and for use in in-situ peel experiments from substrates relevant to the end application of the PSA tape.

     

A higher-order parametric nonlinear reduced-order model for imperfect structures using Neumann expansion

Nonlinear Dynamics - We present an enhanced version of the parametric nonlinear reduced-order model for shape imperfections in structural dynamics we studied in a previous work. In this model, the...     

污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.