Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

On lower iteration complexity bounds for the convex concave saddle point problems

Mathematical Programming - In this paper, we study the lower iteration complexity bounds for finding the saddle point of a strongly convex and strongly concave saddle point problem: $$\min _x\max...     

Reactive Dyeing of Electrospun Cellulose Nanofibers by Pad-steam Method

Based on the functional properties of electrospun cellulose nanofibers(CNF), scientists are showing substantial interest to enhance the aesthetic properties. However, the lower color yield has remained a big challenge due to the higher surface area of nanofibers. In this study, we attempted to improve the color yield properties of CNF by the pad-steam dyeing method. Neat CNF was obtained by deacetylation of electrospun cellulose acetate(CA) nanofibers. Three different kinds of reactive dyes were used and pad-steam dyeing parameters were optimized. SEM images revealed smooth morphology with an increase in the average diameter of nanofibers. FTIR results showed no change in the chemical structure after dyeing of CNF. Color fastness results demonstrated excellent ratings for reactive dyes, which indicate good dye fixation properties and no color loss during the washing process. The results confirm that the pad-steam dyeing method can be potentially considered to improve the aesthetic properties of CNF, which can be utilized for functional garments, such as breathable raincoats and disposable face masks.     

An experimental study about the effect of arrangement on the fire behaviors of lithium-ion batteries

The gadolinium ferrochromite (GdFe_1?xCr_xO₃) was used as a case study of influence of chromium substitution on the perovskite structure in the entire composition range. By exploiting thermal analysis techniques (dilatometry, differential thermal analysis) the influence of chromium was investigated in the context of thermal stability of the canted antiferromagnetic ordering. It was found that the higher the chromium concentration was, the more the Néel temperature decreased, e.g., substitution of 26 % of iron atoms corresponded to a depression of about 60 K with respect to undoped gadolinium ferrite. For higher chromium concentrations the mixed gadolinium ferrochromite was paramagnetic at room temperature. Additional information on the crystal structure and, qualitatively, on the magnetic ordering as well was derived from the results of X-ray diffraction and Mössbauer spectroscopy measurements. For chromium content higher than 10 % the gadolinium ferrochromite may be regarded as a solid solution. For lower concentrations, however, a possible formation of clusters with different Fe/Cr ratio occurs as suggested by Mössbauer spectra.     

低分子量含氟聚合物的制备、官能化及特性

低分子量含氟聚合物是重要的新型功能材料,在国防工业中占有特殊地位。同时,作为高科技战略物资,近年来逐渐成为研究热点。本文对低分子量含氟聚合物的制备方法、官能化及特性进行了综述,重点介绍了低分子量含氟聚合物的制备和官能化方法的研究进展,并总结和详细介绍了低分子量含氟聚合物的特性,最后对该领域的前景和发展方向进行了展望。     

有限液体负载下压电平板声板波理论分析

主要推导平板声板波受有限液体负载后能量衰减与波速改变情形, 以部分波传理论分析该受液体负载的压电平板波传行为, 并以一128$^{\circ}Y$向切角的铌酸锂芯片为例,分析前20个声板波受水与甘油负载下 的能量衰减,并固定某一平板板波, 针对不同甘油厚度负载下, 计算其相速度与衰减变化,该理论分析对于液体负载下的平板板波传感器应用具有极大的参 考价值.     

Thermal properties of chlorosulfonated polyethylene via gas–solid phase method

The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process.     

Design and analysis of two-dimensional photonic crystals channel filter

A novel three-port channel add/drop filter consisting of two waveguides and two cavities is proposed. One is used for a resonant tunneling-based channel add/drop operation from the bus waveguide to the add/drop waveguide, while the other is used to realize the wavelength-selective reflection feedback in the bus waveguide. By means of coupled mode theory in time, the conditions to achieve 100% add efficiency are derived thoroughly. Based on these theoretical analysis, the channel add filter and some other multi-channel filters are designed in two-dimensional photonic crystals (2D PCs) with square lattice of dielectric rods in air. The numerical results by using the finite-difference time-domain (FDTD) method demonstrate almost complete channel add/drop tunneling at resonance via the three-port systems.