排序方式: 共有35条查询结果,搜索用时 31 毫秒
1.
2.
为获得更优的成像质量和更快的成像速度,磁共振成像(MRI)系统的梯度预加重模块需要具有更多的补偿通道和调节参数,常规预加重模块的设计方案使现场可编程门阵列(FPGA)面临巨大的资源消耗.为解决高性能梯度预加重模块的资源消耗大的问题,本文提出了一种基于分时复用技术的梯度预加重实现方案,以常规方案1/44的资源实现了11通道×4组参数的梯度预加重模块.将该模块用于0.35 T MRI系统,测试了补偿前后的涡流曲线和磁共振图像,结果表明该模块有效降低了系统的涡流,减小了磁共振图像中的涡流伪影. 相似文献
3.
在Al2O3-C质耐火材料中添加锆英石、B4C和焦炭,通过高温原位反应生成了ZrC-ZrB2-SiC复合非氧化物耐高温物相.采用XRD分析了不同锆英石、B4C和焦炭的添加量与不同烧成温度下反应产物的物相组成,并采用XRD与SEM进一步研究了含有ZrC-ZrB2-SiC复合非氧化物的铝碳质耐火材料的抗氧化性能及其抗氧化的机理.结果表明:当锆英石-焦炭-B4C混合粉体的加入量为20;,在1550 ℃保温3 h能在铝碳质耐火材料的基质中原位合成ZrC-ZrB2-SiC复合非氧化物,制备得到相应的铝碳质复合耐火材料.ZrC-ZrB2-SiC复合非氧化物在氧化条件下可生成玻璃相,形成致密保护层能够阻止其进一步氧化,从而显著提高铝碳质材料的抗氧化性能. 相似文献
4.
以α-Al2O3、ZrO(NO3)2.2H2O和氨水为原料,通过高温煅烧制备了ZTA复相陶瓷材料,研究了ZrO2添加量对ZTA陶瓷物相组成、表面微观形貌、力学性能以及常温固体粒子冲蚀磨损性能的影响。结果表明:随着ZrO2添加量增加,材料的力学性能逐渐提高,当ZrO2添加量为10 vol%时,ZTA复相陶瓷抗弯强度和断裂韧性分别达461MPa和5.77 MPa.m1/2,相对于纯Al2O3陶瓷提升量达21.3%和64.9%。ZTA复相陶瓷材料的体积冲蚀率随着ZrO2添加量的增加而降低,当ZrO2添加量小于4 vol%时,其体积磨损率急剧下降,随后趋于平稳;随后当ZrO2添加量为10 vol%时,其冲蚀率达最低,为0.015 mm3/g。其中,纯Al2O3陶瓷材料的冲蚀磨损机制主要为横向裂纹相互交错导致材料的剥落,添加ZrO2后,其冲蚀磨损机制以塑性变形为主。 相似文献
5.
本文利用铝灰和粉煤灰为原料,经原位铝热还原氮化法合成了Spinel-Sialon复相材料。通过XRD、SEM、EDS等分析手段,研究了合成温度和还原剂铝的添加量对合成产物物相及微观形貌的影响。结果表明:合成Spinel-Sialon的优化工艺参数为铝的添加量为过量100%、合成温度为1550℃,保温时间3 h,合成得到发育良好的柱状β-Sialon及八面体形的镁铝尖晶石。合成温度、还原剂铝的添加量均是影响氮化产物的重要因素。随着温度的升高或还原剂铝的添加量增多,Al2O3越来越少,β-Sialon和镁铝尖晶石均增多,且β-Sialon的Z值增大,MgAl2O4转变成富铝尖晶石。 相似文献
6.
为改善 8YSZ 材料的力学性能,利用呈板片状结构的 LaMgAl11O19 来强韧化 8YSZ 陶瓷,在 1600 ℃下保温 3 h制备了LaMgAl11O19 -8YSZ 复相陶瓷,研究了 LaMgAl11O19 的添加量对 8YSZ 基复相陶瓷的致密度、显微形貌和力学性能的影响.结果表明,添加板片状 LaMgAl11O19可较明显地改善8YSZ陶瓷的力学性能.当 LaMgAl11O19 的添加量为 20 wt;时,8YSZ基复相陶瓷的抗弯强度和断裂韧性分别为297.4 MPa和4.0 MPa·m1/2. 相似文献
7.
We employ the parallel computing technology to study numerically the
three-dimensional structure of quantized vortices of Bose--Einstein
condensates. For anisotropic cases, the bending process of vortices
is described in detail by the decrease of Gross--Pitaevskii energy. A
completely straight vortex and the steady and symmetrical
multiple-vortex configurations are obtained. We analyse the effect of
initial conditions and angular velocity on the number and shape of
vortices. 相似文献
8.
9.
花键轴冷挤压成形后的三维光塑性模拟研究 总被引:2,自引:0,他引:2
本文利用光塑性方法,以聚碳酸酯(Polycarbonate)为材料研究了矩形花键轴冷挤压成形过程,获得了花键挤压成形的三维塑性应变场分布,提出其变形的应变分布特征,并对典型截面的应变进行了计算分析;文中还通过对聚碳酸酯材料的实验,得到了使花键齿形充满的最佳坯料尺寸,为实际工艺生产优选出合理的工艺参数。 相似文献
10.
A three-dimensional magnetohydrodynamics (MHD) code is designed specially for global simulations of the solar wind-magnetosphere-ionosphere system. The code possesses a high resolution in capturing MHD shocks and discontinuities and a low numerical dissipation in examining possible instabilities inherent in the system. The ionosphere is approximated by a spherical shell with uniform height-integrated conductance. The solar wind is steady, and the interplanetary magnetic field is either due northward or due southward. The code is then run to find solutions of the whole system. It is found that the system has never reached a steady state, but keeps oscillating with a period of about one hour in terms of density variation at the geosynchronous orbit. However, if a certain artificial resistivity is added either in the whole numerical box or in the reconnection sites only, the reconnections change from intermittent to steady regime and the oscillation disappears accordingly. We conclude that the Earth's magnetosphere tends to be in a ceaseless oscillation status because of the low dissipation property inherent in the magnetospheric plasma, and the oscillation may be driven by intermittent magnetic reconnections that occur somewhere in the magnetopause and/or the magnetotail. 相似文献